Pro-face GP-377RT Bedienungsanleitung

1/44

4nd edition 2015.Jan

Easy! Smooth!

GP-377RT/377S/377L

→GP-4301T/TW

Replacement Guidebook

2/44

Preface

This manual introduces the procedures to replace a GP-377R/377S/377L unit with a unit

in GP4000 series.

Model in use

Recommended Substitution

GP-377RT

GP-4301T

(Model#: PFXGP4301TAD)

GP-4301TW

(Model#: PFXGP4301TADW)

GP-377S

GP-4301TW

(Model#: PFXGP4301TADW)

GP-377L

Safety Information

HAZARD OF OPERATOR INJURY, OR UNINTENDED EQUIPMENT DAMAGE

Before operating any of these products, be sure to read all related manuals thoroughly.

Failure to follow these instructions can result in death, serious injury or unintended equipment

damage.

3/44

GP4000 Series Model Number

GP4000 series model number partly differs depending on a specification. Before

placing an order, please make sure of the model number.

GP-4200 series (3.5”)

GP-4300 series (5.7”)

GP-4400 series (7.5”/7.0W”)

GP-4500 series (10.4”)

GP-4600 series (12.1”)

RS-232C/422/485

RS-485 (isolation)

TFT color LCD

TFT color LCD (Wide Type)

Analog Resistive Film Touch Panel

Matrix Resistive Film Touch Panel

AC Type Power Supply

DC Type Power Supply

GP-4201TW/4301TW/4401WW/4501TW

Coated model

Coated model of

GP-4201TW/4301TW/4401WW/4501TW

4/44

Contents

PREFACE 2

SAFETY INFORMATION 2

HAZARD OF OPERATOR INJURY, OR UNINTENDED EQUIPMENT

DAMAGE 2

GP4000 SERIES MODEL NUMBER 3

CONTENTS 4

CHAPTER 1 SPECIFICATION COMPARISON 6

1.1 SPECIFICATIONS OF GP-377R AND GP-4301T/GP-4301TW 6

1.2 SPECIFICATIONS OF GP-377S/GP-377L AND GP-4301TW 8

CHAPTER 2 COMPATIBILITY OF HARDWARE 9

2.1 LOCATIONS OF CONNECTOR 9

2.2 TOUCH PANEL SPECIFICATIONS 10

2.3 DISPLAY COLORS (ONLY GP-377L) 10

2.4 TRANSFER CABLE 11

2.5 INTERFACE 11

2.5.1 SERIAL INTERFACE 11

2.6 PERIPHERAL UNITS AND OPTION UNITS 12

2.6.1 1BARCODE READER CONNECTION 12

2.6.2 PRINTER CONNECTION 12

2.6.3 EXPANSION UNIT 12

2.6.4 FRONT MAINTENANCE UNIT 12

2.6.5 ISOLATION UNIT 12

2.7 POWER CONNECTOR 13

2.8 BACKUP BATTERY (ONLY GP-4301T) 13

2.9 POWER CONSUMPTION 13

2.10 ABOUT PRO-SERVER 13

2.11 OTHER NOTES 13

CHAPTER 3REPLACEMENT PROCEDURE 14

3.1 WORK FLOW 14

5/44

3.2 PREPARATION 15

3.3 RECEIVE SCREEN DATA FROM GP-377R/377S/377L 16

3.4 CONVERT SCREEN DATA WITH THE PROJECT CONVERTER 19

3.5 CHANGE THE DISPLAY UNIT TYPE (ONLY WHEN REPLACING WITH GP-4501TW) 26

3.6 TRANSFER THE SCREEN DATA TO GP-4501T/TW 26

3.7 DIFFERENCES OF SOFTWARE 30

3.7.1 DIFFERENCES AFTER CONVERSION 30

CHAPTER 4 COMMUNICATION WITH DEVICE/PLC 32

4.1 DRIVER LIST 32

4.2 SHAPES OF COM PORTS 32

4.3 SIGNALS OF COM PORTS 32

4.3.1 SIGNALS OF COM1 32

4.3.2 SIGNALS OF COM2 34

4.4 MULTILINK CONNECTION 35

4.5 INTERNAL 2-PORT FEATURE FOR MITSUBISHI PLC 35

4.6 CABLE DIAGRAM AT THE TIME OF REPLACEMENT 36

4.6.1 WHEN USING A RS-232C CONNECTION CABLE 37

4.6.2 WHEN USING A RS-422 CONNECTION CABLE 38

CHAPTER 5 APPENDIX 42

5.1 CHANGING THE SETTING OF THE EXTERNAL MEDIA TO USE 42

6/44

Chapter 1 Specification Comparison

1.1 Specifications of GP-377R and GP-4301T/GP-4301TW

GP-377RT

GP-4301T/GP-4301TW

Display Type

TFT color LCD

Display Colors,

Levels

64 colors (with blink)

UP!

65,536 colors (without

blink)/

16,384 colors (with blink)

Display Resolution

QVGA(320×240 pixcels)

Panel Cutout

Dimensions

W156×H123.5mm

Panel Cutout

Dimensions

W171×H138×D57mm

W169.5×H137×D59.5mm

Touch Panel Type

Matrix

Analog →see 2.2

Memory

Application

2MB

UP! GP-4301T 16MB

UP! GP4301TW 8MB

SRAM

96KB

UP! GP-4301T 320KB

UP! GP4301TW 128KB

Backup Battery

Rechargeable Lithium

battery

NEW!

GP-4301T Replaceable

Lithium battery

→see 2.8

GP4301TW Rechargeable

Lithium battery

Serial

I/F

COM1

D-Sub25P (soket)

RS-232C/422

D-Sub9P (plug)

RS-232C →see 2.５.1

COM2

D-Sub9P (plug)

RS-422/485 →see 2.５.1

Ethernet I/F

* Supported by Multi-unit E

(GP377R-MLTE11)

10BASE-T/100BASE-TX

CF card I/F

* Supported by Multi-unit E

(GP377R-MLTE11)

SD card I/F

UP! GP-4301T ✓

UP! GP4301TW -

7/44

USB I/F

Type A

NEW! ✓→see 2.4

Type mini B

Tool Connector I/F

✓

Printer connection

* Supported by Multi-unit E

(GP377R-MLTE11)

NEW!

USB(Type A) →see 2.6.2

Expansion Unit I/F

✓

-→see 2.6.3

8/44

1.2 Specifications of GP-377S/GP-377L and GP-4301TW

GP-377S/GP-377L

GP-4301TW

Display Type

GP-377S: STN color

LCD

GP-377L: Monochrome

LCD

TFT color LCD

Display Colors, Levels

GP-377S: 64 colors

(with blink)

GP-377L: Monochrome

UP! 65,536 colors (without

blink)/

16,384 colors (with blink)

Display Resolution

QVGA(320×240pixels)

Panel Cutout Dimensions

156(W)×123.5(H)mm

External Dimensions

W171×H138×D57mm

NEW!

W169.5×H137×D59.5mm

Touch Panel Type

Matrix

NEW!

Analog →see 2.2

Backup Battery

Rechargeable Lithium battery

Serial I/F

COM1

D-Sub25P(soket)

RS-232C/422

NEW! D-Sub9P(plug)

RS-232C

→see 2.５.1

COM2

NEW! D-Sub9P(plug)

RS-422/485

→see 2.５.1

Memory

Application

1MB

UP! 8MB

SRAM

96KB

UP! 128KB

Ethernet I/F

UP! 10BASE-T/100BASE-TX

Printer connection

NEW!USB(Type A)

→see 2.6.2

Tool Connector

✓

USB

I/F

Type A

UP! ✓

Type mini B

Expansion Unit I/F

✓

9/44

Chapter 2 Compatibility of Hardware

2.1 Locations of connector

Connector locations on GP-377R/377S/377L GP-4301TW are as follows;

GP-377R/377S/377L

GP-4301TW

Interface names

GP-377R/377S/377L

GP-4301T/GP-4301TW

①

Power Input Terminal Block

Power Connector (DC)

②

Serial I/F(COM1)

③

Serial I/F(COM2)

④

Tool Connector

⑤

Ethernet I/F

⑥

USB I/F(Type A)

⑦

USB I/F(Type mini B)

⑧

SD cardＩ/Ｆ

(* only GP-4301T)

⑧

Auxiliary I/F (AUX)

10/44

2.2 Touch Panel specifications

GP-4301T/GP-4301TW adopts the Analog type.GP-4301Tand GP-4301TW doesn’t

support 2-point touch input (touching 2 points on the screen at the same time).

If you have used the 2-point touch input on GP-377R/377T/377L, change to the

1-point touch input setting using the switch delay function of GP-Pro EX.

When you use 2-point touch input ,there’s a difference between the GP-4301T and

GP-4301TW as below,

GP-4301T

Analog type

Even if you touch two points at the same

time, only the first touched point is

recognized, but the second touched one is

not.

GP-4301TW

Analog type

Even if two different points are touched

at the same time, that’s recognized as

touch input on the middle coordinates

between those two points.

2.3 Display Colors (Only GP-377L)

The display color of GP-477RE is monochrome, but GP-4501T/TW has a TFT color LCD.

After replacement, the display color changes from monochrome to color.

When data of a monochrome model is converted to data of a color model with GP-Pro

EX, the data may be displayed in colors depending on the version of the Project

Converter or settings of the drawing/the parts on the screen.After conversion, please

confirm the display colors of the drawing or the parts on the screens just in case.

If the display is in colors after the data conversion to GP-4301TW…

GP-Pro EX Ver. 3.01.200 (Service Pack1) or later supports the function which

changes drawing in colors to in monochrome. To change the setting, follow the steps

below.

(1) Click [Project]->[System Settings]->[Display Unit].

(2) Open the [Display Settings] tab.

(3) Change [Color] setting to “16 Levels Monochrome, 3-Speed Blink”.

(4) Select [Yellow/Black].

* [Reverse Display] setting is for displaying the screen with black/white reversed.

Check on it if needed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pro-face Touchscreen Handbücher

Pro-face

Pro-face FP2600-T41 Bedienungsanleitung

Pro-face

Pro-face PS300-BU00 Stücklistenhandbuch

Pro-face

Pro-face FP2600-T11 Bedienungsanleitung

Pro-face

Pro-face GP3000 Series Bedienungsanleitung

Pro-face

Pro-face LogiTouch GLC150-BG41-RSFL-24V Bedienungsanleitung

Pro-face

Pro-face FP-3710K Series Bedienungsanleitung

Pro-face

Pro-face PS-3710A Series Bedienungsanleitung

Pro-face

Pro-face GP3000 Series Betriebsanleitung

Pro-face

Pro-face GP-3400 Series Bedienungsanleitung

Pro-face

Pro-face GP37W2-BG41-24V Bedienungsanleitung

Pro-face

Pro-face PS-3600G Series Bedienungsanleitung

Pro-face

Pro-face PS-3600G Series Bedienungsanleitung

Pro-face

Pro-face PS-3700A Bedienungsanleitung

Pro-face

Pro-face GP4000 SERIES Bedienungsanleitung

Pro-face

Pro-face PS-G Bedienungsanleitung

Pro-face

Pro-face PS-3700A Bedienungsanleitung

Pro-face

Pro-face GP77R Series Gebrauchsanweisung

Pro-face

Pro-face PS-3710A Series Bedienungsanleitung

Pro-face

Pro-face GP-577R Series Bedienungsanleitung

Pro-face

Pro-face PL-5900 Series Bedienungsanleitung

Pro-face

Pro-face PFXGP4401TADR Bedienungsanleitung

Pro-face

Pro-face PFXGP4502WADW Bedienungsanleitung

Pro-face

Pro-face GP3000 Series Bedienungsanleitung

Pro-face

Pro-face GP-2500 Series Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung