ProLights Eclipse FC Bedienungsanleitung

ECLIPSEFS

OPTIC

14° / 19° / 26° / 36° / 50°

USER MANUAL

ECLIPSEFS

LED PROFILER

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, PROLIGHTS reserves the right to modify the characteristics

stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.prolightsamerica.com

ECLIPSEFS

Packing content • ECLIPSEFS

• DMX cable

• Power cable

• User manual

TABLE OF CONTENTS Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specications

1. 3 The congurations

1. 4 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 Static mode

3. 5 Manual mode

3. 6 Slave receive mode

3. 7 Operations in automatic mode

3. 8 Linking

3. 9 DMX conguration

3. 10 DMX mode

3. 11 Fixture ID and RDM

3. 12 Connection of the DMX line

3. 13 Construction of the DMX termination

3. 14 DMX control

3. 15 Setup

3. 16 Avanced

3. 17 Fixure information

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement

4. 3 Trouble shooting

ECLIPSEFS

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with and approved for the North American Market.

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places subject to vibrations or bumps;

- in places with a temperature of over 45 °C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

ECLIPSEFS

- 1 - INTRODUCTION

1.1 DESCRIPTION

ECLIPSEFS is a Full Color LED Elipsoidal designed to deliver a full range of pastels, whites or saturates

smoothly, consistently, and both with or without gobos.

The ECLIPSEFS’s RGB+Lime LED engine has been specially engineered to provide a full spectrum and full

output in the most discerning environments, regardless of which role the ECLIPSEFS is playing.

Features:

• RGB+Lime LED Ellipsoidal with HD dimming and extensive color palette.

• High Denition optics for sharp gobo projection.

• Accepts industry standard accessories.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source:91x3 W RGB+Lime LEDs

• CT:@Full - 5400 K

• CRI:@Full - 82

• Luminous Flux: lm

• Luminous Flux:(26°) 6262 lm at studio mode, 6524 lm at HB mode

• Lux:(14°) 8090lux, (19°) 7020lux(26°) 4960lux, (36°) 2610lux, (50°) 1190 lux @3m Full

• Source Life Expectancy: >50.000 h

OPTICS

• Beam Angle:optional 14°/19° / 26° / 36° / 50 °

• Lens Type: HQ glass lens optics

COLOR SYSTEM

• Color Mixing: RGB+Lime/Full Color

• CTC: CTC control through independent DMX channel

• White Presets:2700~10000 K

• Color Wheel: Virtual color wheel with presets

• Macros: Several pre-build pixel macros with adjustable speed

DYNAMIC EFFECTS

• Gobo Size:B

• Static Color Mode: Selection of static color

• Manual Color Mode: Manual adjustment of color

• Special Features:HB Mode, Studio Mode, Silent Mode

BODY

• Body: Sturdy die-cast aluminium body conceived for long-time durability

• Body Color: Black

CONTROL

• Protocols: DMX512, RDM

• DMX Channels:Theater 1/3/5ch - Tour 3/4//5/8/13 ch

ECLIPSEFS

• RDM: RDM ready for xture remote monitor and settings

• Display: Black OLED high resolution display

• Firmware Upgrade: Yes, via USB-DMX interface (UPBOX2) not included

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: Linear 0~100% electronic dimmer

• Dimmer Curves:4 Dierent dimming curves available

• Strobe/Shutter:1-25 Hz, electronic

• Battery Backup: Battery backup for user operation without connecting to the main power

• Operating Temperature: -10° ~ +45°

• Flicker: Flicker free operation

• Selectable PWM: 600~25K Hz

ELECTRICAL

• Power Supply: 100-240V – 50/60Hz

• Power Consumption (at 230V):220 W

• Power Consumption (at 120V):220 W

• Output (at 230V):9 units on a single power line

• Output (at 120V):4 units on a single power line

PHYSICAL

• Cooling: Low noise fan

• Suspension And Fixing: Hanging bracket suitable for safe hanging and positioning

• Signal Connection: DMX 5p IN/OUT Amphenol

• Power Connection: IN/OUT Neutrik Truecon

• IP:20

• Dimensions (WxHxD):663x268x259 mm

• Weight:10 kg

ECLIPSEFS

Technical drawing Fig.1

259.4mm/

10,21mm

268.8mm/

10,58in

663.3mm/26,11in

ECLIPSEFS + OPTIC

1.3 THE CONFIGURATIONS

Conﬁguration

1Reector Housing

Middle part, compatible with

14°, 19°, 26°, 36°, 50° optics

Optics for ECLIPSE proler,

14° beam

Optics for ECLIPSE proler,

19° beam

Optics for ECLIPSE proler,

26° beam

Optics for ECLIPSE proler,

36° beam

Optics for ECLIPSE proler,

50° beam

ECLIPSEFS

Fig.2

Rear panel

1.4 OPERATING ELEMENTS AND CONNECTIONS

1. MOUNTING BRACKET

2. LOCKING KNOB for the mounting bracket

3. HANDLE

4. ECLIPSEFS

5. SAFETY EYE to attach safety cable.

6. SHUTTER

7. ECLIPSEMP - Aluminium middle part

8. OPTIC

9. FILTER FRAME

10. FUSE OLDER in the event of breakage, always

replace the fuse with the same type and

rating.

11. CONTROL PANEL with display and 4 button

used to access the control panel functions

and manage them.

12. POWER OUT (PowerCON OUT): connect to

supply power to the next unit.

13. POWER IN (PowerCON IN): for connection to a

socket (100-240V~/50-60Hz) via the supplied

mains cable.

14. DMX OUT (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C

15. DMX IN (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C

10 13

Fig.3

CLAMP

SAFETY

CABLE 1

ECLIPSEFS

- 2 - INSTALLATION

2.1 MOUNTING

ECLIPSEFS may be set up on a solid and even surface. The unit can also be mounted upside down to a cross

arm. For xing, stable mounting clips are required. The mounting place must be of sucient stability and

be able to support a weight of 10 times of the unit’s weight.

When carrying out any installation, always comply scrupulously with all the regulations (particularly re-

garding safety) currently in force in the country in which the xture’s being used.

• Install the projector at a suitable location by means of the mounting bracket (1).

• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.

• Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the

bracket if is necessary.

ECLIPSEFS

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the unit is ready for operation

and can be operated via a DMX controller or it independently performs its show program in succession.

To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and o via a light switch.

3.2 BASIC

Access control panel functions using the four panel buttons located directly underneath the LCD Display

(g.4).

MODE/ESC UP DOWN ENTER

Used to access the menu or

to return a previous menu

option

Navigates downwards through

the menu list and increases

the numeric value when in a

function

Navigates upwards through

the menu list and decreases

the numeric value when in

a function

Used to select and store the

current menu or conrm the

current function value or

option within a menu

Fig.4 - Functions of the buttons

Andere Handbücher für Eclipse FC

Inhaltsverzeichnis

Andere ProLights DJ-Equipment Handbücher

ProLights

ProLights CROMOSPOT400 Bedienungsanleitung

ProLights

ProLights BATPAR180 Bedienungsanleitung

ProLights

ProLights PIXIEWASH Bedienungsanleitung

ProLights

ProLights jetbeam-2 Bedienungsanleitung

ProLights

ProLights 6 BEAM Bedienungsanleitung

ProLights

ProLights 4MOON Bedienungsanleitung

ProLights

ProLights 6BEAMQ Bedienungsanleitung

ProLights

ProLights TRUSSPOD3BAT Bedienungsanleitung

ProLights

ProLights Halupix Bedienungsanleitung

ProLights

ProLights HZ660D Bedienungsanleitung

ProLights

ProLights ECLIPSEHDTWC Bedienungsanleitung

ProLights

ProLights AIR5FAN Bedienungsanleitung

ProLights

ProLights STARKBLADE8 Bedienungsanleitung

ProLights

ProLights GALLERYCLIPSETU Bedienungsanleitung

ProLights

ProLights Pendant stations Bedienungsanleitung

ProLights

ProLights DOTQ Bedienungsanleitung

ProLights

ProLights SUNPIX24TRI Bedienungsanleitung

ProLights

ProLights EclProfile CT+ Bedienungsanleitung

ProLights

ProLights RUBYFCX Bedienungsanleitung

ProLights

ProLights Z8STRIP Bedienungsanleitung

ProLights

ProLights SmartBat Wash Bedienungsanleitung

ProLights

ProLights CONFETTIGUNNER Bedienungsanleitung

ProLights

ProLights STARBALL Bedienungsanleitung

ProLights

ProLights PF5 Series Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung