Prorack K062 Bedienungsanleitung
K062
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 4 x 1 x 4
Revision No: 5E 1
Fitting Kit K062
MAX kgs (lbs)
W/P WHD
Mazda
B Series Double Cab, 4dr Ute 99-06 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
Bounty Double Cab, 4dr Ute Feb 99-Oct 06 NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
Bravo Dual Cab, 4dr Ute Feb 99-Oct 06 AU 75 kgs (165 lbs) 75 kgs (165 lbs)
Drifter Double Cab, 4dr Ute 03-06 ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
Ford
Courier Double Cab, 4dr Ute Feb 99-Oct 06 NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
Courier Double Cab, 4dr Ute Feb 99-Oct 06 AU 75 kgs (165 lbs) 75 kgs (165 lbs)
Ranger Double Cab, 4dr Ute 03-06 ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
Ranger Double Cab, 4dr Ute 99-06 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
Hyundai
Scoupe, 3dr Hatch Aug 90-Feb 95 NZ 60 kgs (132 lbs) 60 kgs (132 lbs)
2
Fitting Kit K062
X
A B C 1 2 3
B Series Double Cab, 4dr Ute 99-06 (EU) -200mm 550mm - 871mm 865mm -
-7 -7/8ths" 21 5/8ths" - 34 5/16ths" 34 1/16ths" -
Bounty Double Cab, 4dr Ute Feb 99-Oct 06 (NZ) -200mm 550mm - 871mm 865mm -
-7 -7/8ths" 21 5/8ths" - 34 5/16ths" 34 1/16ths" -
Bravo Dual Cab, 4dr Ute Feb 99-Oct 06 (AU) -200mm 550mm - 871mm 865mm -
-7 -7/8ths" 21 5/8ths" - 34 5/16ths" 34 1/16ths" -
Courier Double Cab, 4dr Ute Feb 99-Oct 06 (NZ) -200mm 550mm - 871mm 865mm -
-7 -7/8ths" 21 5/8ths" - 34 5/16ths" 34 1/16ths" -
Courier Double Cab, 4dr Ute Feb 99-Oct 06 (AU) -200mm 550mm - 871mm 865mm -
-7 -7/8ths" 21 5/8ths" - 34 5/16ths" 34 1/16ths" -
Drifter Double Cab, 4dr Ute 03-06 (ZA) -200mm 550mm - 871mm 865mm -
-7 -7/8ths" 21 5/8ths" - 34 5/16ths" 34 1/16ths" -
Ranger Double Cab, 4dr Ute 03-06 (ZA) -200mm 550mm - 871mm 865mm -
-7 -7/8ths" 21 5/8ths" - 34 5/16ths" 34 1/16ths" -
Ranger Double Cab, 4dr Ute 99-06 (EU) -200mm 550mm - 871mm 865mm -
-7 -7/8ths" 21 5/8ths" - 34 5/16ths" 34 1/16ths" -
Scoupe, 3dr Hatch Aug 90-Feb 95 (NZ) - - - - - -
- - - - - -
3
Fitting Kit EN
K062
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
NOTE: Clamp images in these instructions may
not be representative of the clamps in this kit
4
Fitting Kit EN
K062
●Use keys to remove covers.
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
5
Fitting Kit EN
K062
●Remove locking screw.
●Cut protective strip in four equal lengths.
●Apply protective strip as shown.
Trim if required.
●Attach clamp to each leg. NOTE; clamps
may have labels showing their positions on
the vehicle (For example; "Front Right").
6
Fitting Kit EN
K062
●Refit locking screw so that it goes through
the hole in the clamp. Do not begin to
tighten the locking screw.
●Fit rubber pads (supplied with fitting kit) to
foot.
●Make sure the pad fits into the holes
underneath the foot.
7
Fitting Kit EN
K062
Fitment
●Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●Clamps directly to edge of roof under the
doors
●Please check the front of this manual for
information relating specifically to your
vehicle.
●Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
●Clamps over rubber door frame mouldings.
●Tighten adjusting screw to 5 Nm (3.7 ft lb)
hand tight.
8
Fitting Kit EN
K062
●Tighten locking screw on both legs evenly.
●Check crossbar is securely attached to the
vehicle.
●Use keys to fit and lock covers
9
Fitting Kit EN
K062
CAUTION: Recheck all fasteners immediately after
a load is applied to the crossbars.
Regularly check screws are tight.
10
Inhaltsverzeichnis
Andere Prorack Autozubehör Handbücher
Prorack
Prorack K363 Bedienungsanleitung
Prorack
Prorack K078 Bedienungsanleitung
Prorack
Prorack K805 Bedienungsanleitung
Prorack
Prorack K793 Bedienungsanleitung
Prorack
Prorack S17 Bedienungsanleitung
Prorack
Prorack K719 Bedienungsanleitung
Prorack
Prorack K731 Bedienungsanleitung
Prorack
Prorack K527 Bedienungsanleitung
Prorack
Prorack K319 Bedienungsanleitung
Prorack
Prorack K375 Bedienungsanleitung
Prorack
Prorack K1018 Bedienungsanleitung
Prorack
Prorack K087 Bedienungsanleitung
Prorack
Prorack K1007 Bedienungsanleitung
Prorack
Prorack K385 Bedienungsanleitung
Prorack
Prorack K671 Bedienungsanleitung
Prorack
Prorack K1013 Bedienungsanleitung
Prorack
Prorack K879 Bedienungsanleitung
Prorack
Prorack K097 Bedienungsanleitung
Prorack
Prorack K467 Bedienungsanleitung
Prorack
Prorack K465 Bedienungsanleitung
