Quantum ACL 4/52 Handbuch

ACL 4/52 Automated Tape Library

for DLT Cartridges

Operator’s Guide

6211222-05

Ver. 5, Rel. 0

ACL 4/52 Operator’s Guide, 6211222-05, Ver. 5, Rel. 0, January 2000. Printed in the USA.

ATL Products, Inc. provides this publication “as is” without warranty of any kind, either express or implied, including but

not limited to the implied warranties of merchantability or fitness for a particular purpose. ATL Products, Inc. may revise

this publication from time to time without notice.

Your right to copy this manual is limited by copyright law. Making copies or adaptations without prior written

authorization of ATL Products, Inc. is prohibited by law and constitutes a punishable violation of the law.

TRADEMARK STATEMENT

Prism Library Architecture, IntelliGrip, WebAdmin, and WebLibrarian are all trademarks of ATL Products, Inc.

Other trademarks may be mentioned herein which belong to other companies.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Any changes or modifications made to this equipment may void the user's authority to operate this equipment.

Operation of this equipment in a residential area may cause interference in which case the user at his own expense will be

required to take whatever measures may be required to correct the interference.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation.

INDUSTRY CANADA (DIGITAL APPARATUS)

Interference-Causing Equipment Standard

ICES-003 Issue 2

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Reglément sur le matériel brouilleur du Canada.

CISPR-22 WARNING!

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may

be required to take adequate measures.

ACHTUNG!

Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes

Rundfunkstörungen auftreten, in welchen Fällen der Benutzer für entsprechende Gegenmassnahmen verantwortlich ist.

ATTENTION!

Ceci est un produit de classe A. Dans un environment domestique, ce produit peut causer des interférences

radioélectriques. Il appartient alors à l'utilisateur de prendre les mesures appropriées.

6207947-06cA 34

NOTICE FOR USA AND CANADA ONLY

If shipped to USA, use the UL LISTED power cord specified below for 100-120 V operation. If shipped to Canada, use the

CSA CERTIFIED power cord specified below for 100-120V operation.

Plug Cap Parallel blade with ground pin (NEMA 5-15P configuration)

Cord Type: SJT, three 16 AWG (1.5 mm2) or 18 AWG (1.0 mm2) wires

Length Maximum 15 feet (4.5m)

Rating Minimum 10 A, 125 V

ATTENTION

LIRE LA REMARQUE DANS LE MODE D'EMPLOI.

REMARQUE

CETTE REMARQUE NE CONCERNE QUE LES ÉTATS-UNIS ET LE CANADA.

En cas d'envoi aux États-Unis, utiliser le cordon d'alimentation CERTIFIÉ UL et convenant pour 100-120 V.

En cas d'envoi au Canada, utiliser le cordon d'alimentation CERTIFIÉ CSA et convenant pour 100-120 V.

Fiche Broches parallèles avec une broche de mise à la terre (configuration NEMA 5-15P)

Cordon Type: SJT, trifilaire 16 AWG (1.5 mm2) ou 18 AWG (1.0 mm2)

Longeur Maximum 15 pieds (4.5m)

Capacité Minimum 10 A, 125 V

LASER STATEMENT

Class 1 Laser Product

CAUTION: With all panels and enclosures in place, this product is rated as a Class I laser product. The bar code scanner

inside this product, however, is a Class II laser. Avoid exposure to the laser light emitted from the bar code scanner. Do not

stare into the beam.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in

hazardous exposure.

Laser Klasse 1

VORSICHT: Dieses Produkt Enthdlt Einen Laser Der Kategorie II. Laserstrahlen - Der Strichcode-scanner Gibt

Laserstrahlen aus. VERMEIDEN SIE jeden Blickkontakt und direkten kvrperlichen Kontakt mit diesen Strahlen.

VORSICHT: Ein nicht ordnungsgemd_er (siehe hier enthaltene Anweisungen) Einsatz bzw. Dnderungen der

Betriebsleistung kvnnen einen gesundheitsgefdhrdenden Kontakt zur Folge haben.

Appareil à Laser de Classe 1

ATTENTION: Ce produit émet de la classe laser II. Rayonnement laser - NE PAS fixer des yeux le rayon. Éviter les

expositions - Le rayonnement laser est émis à partir du lecteur optique de code barre.

ATTENTION: L’utilisation de contrôles ou d’ajustements de performance des procédures autres que ceux indiqués ici peut

entraîner une exposition dangereuse.

Producto Láser de Clase 1

¡ATENCIÓN! Este producto contiene laser de clase II. Luz de laser - NO mire el rayo. Evite el contacto con la luz: la luz de

laser se emite desde el explorador de código de barras.

¡ATENCIÓN! El uso de los controles o ajustes para realizar procedimientos que no son especificados puede provocar una

situación peligrosa.

Luokan 1 Laserlaite

ATTENZIONE: Questo prodotto emette una luce laser di Classe II. NON guardare il facsio di luce ed evitare di esporsi alla

fonte del laser. Il fascio di luce laser h emesso dal dispositivo di scansione del codice a barre.

ATTENZIONE: L’uso di comandi o regolazioni per eseguire le procedure che non siano quelli specificati in questa

documentazione pur causare rischi all ‘incolumit’ delle persone.

BATTERY STATEMENT

Caution

The Dallas Semiconductor DS1230AB-200 component on the robotic controller board inside this product contains a lithium

battery. Lithium is a hazardous material that must be disposed of in accordance with local, state, and federal law.

Forsigtig

Båndbiblioteket indeholder et lithiumbatteri. Dallas Semiconductor DS1230AB-200 på robotkontroltavlen indeholder et

lithiumbatteri. Lithium kan anses for at være et sundhedsfarligt materiale. Kassér dette batteri i overensstemmelse med

lokale og nationale lovbestemmelser.

Huomautus

Nauhakirjastossa on litiumparisto. Robottiohjainkortin Dallas Semiconductor DS1230AB-200-puolijohteessa on

litiumparisto. Litium voidaan luokitella vaaralliseksi aineeksi. Pariston hävittämisessä on noudatettava viranomaisten

antamia ohjeita ja määräyksiä.

Attention

La bibliothèque de bande contient une pile au lithium. Le Dallas Semiconductor DS1230AB-200 sur la carte robotic

contrôleur contient une pile au lithium. Le lithium peut être considéré comme matériau dangereux. Jeter cette pile

conformément aux lois locales, d’état et fédérales.

Achtung!

Die Bandbibliothek enthält eine Lithiumbatterie. Der Halbleiter Dallas Semiconductor DS1230AB-200 auf dem Roboter-

Controller enthält eine Lithiumbatterie. Lithium gilt als Schadstoff. Bei der Entsorgung dieser Batterie alle entsprechenden

kommunalen, staatlichen und bundesweiten Vorschriften beachten!

Attenzione

La libreria a nastro magnetico contiene una batteria al litio. Il semiconduttore Dallas Semiconductor DS1230AB-200 sulla

scheda controller robotic contiene una batteria al litio. Il litio può essere considerato un materiale pericoloso. Eliminare

queste batterie in conformità alle normative locali e statali vigenti.

Forsiktig

Kassettbiblioteket inneholder et litiumbatteri. Enheten Dallas Semiconductor DS1230AB-200 på robotkontrollkortet

inneholder et litiumbatteri. Litium kan anses som et farlig materiale. Batteriet skal kastes i henhold til lokal og nasjonal

lovgivning.

Precaución

La biblioteca de cintas contiene una pila de litio. El semiconductor Dallas Semiconductor DS1230AB-200 en el tablero

controlador robotic contiene una pila de litio. El litio puede considerarse como un material peligroso. Deseche esta pila de

acuerdo con las leyes municipales, estatales y federales.

Varning!

Magnetbandsbiblioteket innehåller ett litiumbatteri. Dallas Semiconductor DS1230AB-200 på robotstyrkortet innehåller ett

litiumbatteri. Litium kan anses vara ett farligt material. Kassera detta batteri i enlighet med lokala och statliga lagar och

förordningar.

viiACL 4/52 Operator’s Guide

Contents

Preface

Chapter 1

Library Overview .........................................................................................1

Library Description.......................................................................................2

ACL 4/52 Library Numbering Conventions......................................3

Operator Accessible Components...............................................................4

Control Panel...........................................................................................4

Load Port..................................................................................................6

Front Door (with Interlock Switch) 7

Rear Panel ................................................................................................8

DLT Tape Drive Status/Control Panel 9

Cartridge/Tape Drive Compatibility.......................................................12

Menu Mode Structure.................................................................................13

Menu Navigation ........................................................................................14

Operator Tasks (using the Menu Mode)..................................................16

Configuration Menu Functions 16

Drive Control Menu Functions 17

Diagnostics Menu Functions 18

Chapter 2

Operating Procedures................................................................................21

Operating Procedures.................................................................................22

Applying Power to the Library 22

Placing the Library On-Line 22

Taking the Library Off-Line 22

Removing Power from the Library 23

Inserting Tape Cartridges 23

Removing Tape Cartridges 24

Manually Unloading the DLT Tape Drive 25

Turning the Interior Light On/Off...........................................................28

Operating Procedures Using the Menu Mode........................................30

Entering the Menu Mode 30

Exiting the Menu Mode .......................................................................30

Setting/Changing the Library SCSI Address 31

Setting/Changing a Tape Drive SCSI Address 32

Contents

viii ACL 4/52 Operator’s Guide

Defining the Library Power-Up State 33

Enabling/Disabling the Auto Clean Option 34

Enabling/Disabling the Retry Option 34

Enabling/Disabling the Auto Load Feature 35

Setting/Changing the Status Display Area Language ...................36

Adjusting the Display Area Contrast 37

Unloading a Drive................................................................................37

Cleaning a Drive...................................................................................38

Displaying the Library’s Actuator or Sensor Status........................39

Performing an Inventory.....................................................................40

Chapter 3

Operator Troubleshooting .......................................................................43

Operator Troubleshooting.........................................................................44

Other Problems ...........................................................................................46

Glossary

ixACL 4/52 Operator’s Guide

Figures

Figure 1 ACL 4/52 Library......................................................................2

Figure 2 ACL 4/52 Library Numbering Conventions.........................3

Figure 3 Control Panel..............................................................................4

Figure 4 Load Port.....................................................................................7

Figure 5 Front Door...................................................................................8

Figure 6 Rear Panel ...................................................................................9

Figure 7 DLT 2000 Tape Drvie Status/Control Panel........................10

Figure 8 DLT 4000 Tape Drive Status/Control Panel........................10

Figure 9 DLT 7000 Tape Drive Status/Control Panel........................11

Figure 10 Menu Structure ........................................................................13

Figure 11 Menu Navigation example.....................................................15

Figure 12 Inserting/Removing Tapes....................................................24

Figure 13 DLT 2000 and DLT 4000 Manual Unload.............................26

Figure 14 DLT 7000 Manual Unload ......................................................27

Figure 15 Turning the Interior Light On/Off........................................29

x ACL 4/52 Operator’s Guide

Andere Handbücher für ACL 4/52

Inhaltsverzeichnis

Andere Quantum Lagerung Handbücher

Quantum

Quantum Maxtor Fireball CR Bedienungsanleitung

Quantum

Quantum LTO 4 Bedienungsanleitung

Quantum

Quantum Sun StorEdge L25 Bedienungsanleitung

Quantum

Quantum Scalar i40 Bedienungsanleitung

Quantum

Quantum DXi6900 Bedienungsanleitung

Quantum

Quantum FastStor 2 Bedienungsanleitung

Quantum

Quantum Tape Drives A-Series Bedienungsanleitung

Quantum

Quantum ValueLoader DLT VS160 Betriebsanleitung

Quantum

Quantum ValueLoader DLT VS160 Betriebsanleitung

Quantum

Quantum DX100 Bedienungsanleitung

Quantum

Quantum DXi4700 Installations- und Betriebshandbuch

Quantum

Quantum Scalar LTFS Stücklistenhandbuch

Quantum

Quantum StorNext QD7000 Bedienungsanleitung

Quantum

Quantum DXi8500 Bedienungsanleitung

Quantum

Quantum Scalar i6000 Gebrauchs- und Pflegehandbuch

Quantum

Quantum Scalar i40 Bedienungs- und Sicherheitshinweise

Quantum

Quantum Scalar i40 Bedienungs- und Sicherheitshinweise

Quantum

Quantum DLT 2500 Bedienungsanleitung

Quantum

Quantum Scalar i40 Bedienungsanleitung

Quantum

Quantum ATL M2500 Bedienungsanleitung

Quantum

Quantum DXi2500-D Bedienungsanleitung

Quantum

Quantum Scalar 50 Bedienungsanleitung

Quantum

Quantum LTO 1U Bedienungsanleitung

Quantum

Quantum A-Series FTP Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung