Radio Shack ET-550 Bedienungsanleitung

Cat. No. 43-1050A

OWNER’S MANUAL

Please read before using this equipment.

ET-550

25-Channel Dual Keypad

Cordless Telephone

43-1050a.fm Page 1 Tuesday, August 17, 1999 12:56 PM

FEATURES

Your RadioShack ET-550 25-Channel

Dual Keypad Cordless Telephone is

designed to exacting standards that

ensure reliability, long life, and out-

standing performance.

Its features include:

Dual Ke

pads — a full set of keys on

both the ET-550’s handset and base

let you use either keypad to make and

answer calls or program the phone’s

features.

Speakerphone — lets you make or

answer calls without using the hand-

set.

Super CCT Noise-Reduction Cir-

cuitr

— provides clear telephone

conversations, giving you sound clarity

comparable to that of a corded phone.

25 Channels — lets you change to a

clearer channel during a call if you no-

tice interference.

20-Number Memor

Dialin

— lets

you store up to 20 numbers in memory

— 10 on the handset and 10 on the

base — for easy dialing.

Securit

Access-Protection Code —

automatically prevents other cordless

phone users from using your phone

line while the handset is off the base.

COM-LOK®— ensures that other

cordless phone users cannot use your

phone line when the handset is on the

base.

Quick Talk — lets you make or an-

swer a call by simply lifting the handset

from the base.

/Two-Wa

Intercom S

stem

— lets you send a signal from the base

to the handset, or from the handset to

the base, so you can page someone or

easily locate the handset when it is

away from the base. If someone an-

swers, you can use the ET-550 like a

two-way intercom.

Redial — lets you quickly redial the

last number dialed.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as Call Waiting.

Tone/Pulse Dialin

— lets you use

your phone with either type of service.

Hearin

-Aid Compatibilit

— lets

you use your phone with hearing aids

that have a T (telephone) switch.

RadioShack is a registered trademark used by Tandy Corporation.

43-1050a.fm Page 2 Tuesday, August 17, 1999 12:56 PM

Important Note: Cordless phones

such as this one require AC power to

operate. When the AC power is off,

you cannot dial out or receive incom-

ing calls using your ET-550. To be

safe, you should also have a phone

that does not need AC power to oper-

ate (not a cordless phone) so you can

still make and receive calls if there is

an AC power failure.

Your telephone operates on standard

radio frequencies as allocated by the

FCC. Even though the access protec-

tion code prevents unauthorized use

of your phone line, it is possible for

other radio units operating on similar

frequencies within a certain area to

unintentionally intercept your conver-

sations and/or cause interference.

This lack of privacy can occur with any

cordless phone.

We recommend you record your

phone’s serial number here. The num-

ber is on the bottom panel of the base.

Serial Number: __________________

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

This symbol is intended to alert

you to the presence of uninsu-

lated dan

erous volta

e within

the phone’s enclosure that

ht be of sufficient ma

nitude

to constitute a risk of electric

shock. Do not open the phone’s

case.

This symbol is intended to in-

form you that important operat-

and maintenance

instructions are included in the

literature accompanyin

this

phone.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

Warning: To prevent fire or shock

hazard, do not expose this phone

to rain or moisture.

CAUTION

43-1050a.fm Page 3 Tuesday, August 17, 1999 12:56 PM

READ THIS BEFORE

INSTALLATION

Each device that you connect to the

phone line draws power from the

phone line. We refer to this power draw

as the device’s

Ringer Equivalence

Number

, or REN. The REN is shown

on the bottom of the base.

If you are using more than one phone

or other device on the line, add up all

the RENs. If the total is more than five,

your phones might not ring. In rural ar-

eas, a total REN of three might impair

ringer operation. If ringer operation is

impaired, remove a device from the

line.

FCC STATEMENT

This telephone complies with Part 68

FCC Rules

. You must, upon re-

quest, provide the FCC Registration

Number and the REN to your phone

company. These numbers are shown

on the bottom of the base.

Note: You must not connect your

phone to any of the following:

• Coin-operated systems

• Party-line systems

• Most electronic key phone sys-

tems

43-1050a.fm Page 4 Tuesday, August 17, 1999 12:56 PM

CONTENTS

Installation ............................................................................................................ 6

Selecting a Location ........................................................................................ 6

Placing the Base on a Desk Top ............................................................... 6

Mounting the Base on a Wall Plate ........................................................... 7

Mounting the Base Directly on the Wall .................................................... 9

Connecting and Charging the Battery ........................................................... 10

Setting the Dialing Mode ............................................................................... 12

Turning the Ringer On/Off ............................................................................. 12

Operation ............................................................................................................ 13

Making and Receiving Calls .......................................................................... 13

Using the Handset .................................................................................. 13

Using the Speakerphone ........................................................................ 13

Switching Between the Handset and Speakerphone ............................. 14

Using Both the Handset and Speakerphone .......................................... 14

Changing the Channel ............................................................................ 14

Putting a Call on Hold ................................................................................... 14

Using the Paging/Intercom Features ............................................................ 15

Using Redial .................................................................................................. 16

Using Flash ................................................................................................... 16

Using Tone Services on a Pulse Line ........................................................... 17

Memory Dialing ............................................................................................. 17

Storing a Number in Memory .................................................................. 17

Entering a Pause .................................................................................... 18

Dialing a Memory Number ...................................................................... 19

Chain-Dialing Service Numbers ............................................................. 19

Testing Stored Emergency Numbers ..................................................... 19

Troubleshootin

................................................................................................ 20

Care and Maintenance ...................................................................................... 22

Replacing the Battery .................................................................................... 23

The FCC Wants You to Know ....................................................................... 24

Lightning ....................................................................................................... 24

43-1050a.fm Page 5 Tuesday, August 17, 1999 12:56 PM

INSTALLATION

SELECTING A LOCATION

You can place the phone on a desk top

or table, or mount it on a wall. Select a

location that is:

• near an AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls

or filing cabinets, wireless inter-

coms, alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of

several locations, try each to see

which provides the best performance.

Caution: The supplied RadioShack

adapter was designed specifically for

your ET-550. Use only the supplied

adapter.

Notes:

• Your telephone connects directly

to a modular telephone line jack. If

your phone line jack is not a mod-

ular jack, you can update the wir-

ing yourself, using jacks and

adapters available at your local

RadioShack store. Or, you can let

the phone company update the

wiring for you.

• The USOC number of the jack to

be installed is RJ11C (RJ11W if

you want to mount it on a wall

plate).

Placing the Base

on a Desk Top

Follow these steps when you place

the base on a desk, shelf, or table.

1. Plug one end of the supplied mod-

ular cord into the TEL LINE jack on

the back of the base.

2. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

43-1050a.fm Page 6 Tuesday, August 17, 1999 12:56 PM

3. Route the adapter’s cord through

the strain relief slot on top of the

base.

4. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

5. Plug the modular cord’s other end

into a modular phone line jack.

6. Fully extend the base’s antenna

and place it in a vertical position.

Mounting the Base

on a Wall Plate

1. Plug one end of a short modular

cord (such as Cat. No. 279-390,

not supplied) into the TEL LINE

jack on the back of the base.

2. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

43-1050a.fm Page 7 Tuesday, August 17, 1999 12:56 PM

3. Route the modular cord through

the upper groove and the adapter

cord through both the upper and

lower grooves on the bottom of

the base.

4. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

5. Plug the short modular cord’s

other end into the wall plate jack,

then align the base’s keyhole slots

with the wall plate studs and slide

the base downward to secure it.

6. Press and lift out the handset

holder, rotate it 180°, then snap it

back into place so it holds the

handset.

7. Fully extend the base’s antenna

and place it in a vertical position.

Lower

Groove Upper

Grooves

43-1050a.fm Page 8 Tuesday, August 17, 1999 12:56 PM

Mounting the Base

Directly on the Wall

For this mounting method, you need

two wood screws (not supplied) with

heads that fit into the keyhole slots on

the bottom of the base.

1. Drill two holes 315/16

inches apart. Then

thread a screw into

each hole, letting

the heads extend

about

5/16 inch from

the wall.

2. Plug one end of the supplied mod-

ular cord into the TEL LINE jack on

the back of the base.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

4. Route the supplied modular cord

and the adapter cord through both

the upper and lower grooves on

the bottom of the base.

5. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

315/16

5/16

Lower

Grooves Upper

Grooves

43-1050a.fm Page 9 Tuesday, August 17, 1999 12:56 PM

6. Plug the modular cord’s other end

into a modular phone line jack.

7. Align the keyhole slots with the

mounting screws and slide the

base downward to secure it.

8. Press and lift out the handset

holder, rotate it 180°, then snap it

back into place so it holds the

handset.

9. Fully extend the base’s antenna

and place it in a vertical position.

CONNECTING AND

CHARGING THE

BATTERY

The ET-550 comes with a recharge-

able nickel-cadmium battery installed

in the handset. Before using your

phone’s handset, you must connect

the battery, then charge it for about 14

hours.

1. Using a Phillips screwdriver,

remove the screw on the battery

compartment cover on the bottom

of the handset. Then press down

and slide off the cover in the direc-

tion of the arrow.

2. Insert the battery pack’s plastic

connector into the phone’s socket.

The plug fits only one way.

43-1050a.fm Page 10 Tuesday, August 17, 1999 12:56 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack ET-546 Bedienungsanleitung

Radio Shack

Radio Shack 43-329 Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack 43-142 Bedienungsanleitung

Radio Shack

Radio Shack 43-3526 Bedienungsanleitung

Radio Shack

Radio Shack TAD-734 Bedienungsanleitung

Radio Shack

Radio Shack 43-3514 Bedienungsanleitung

Radio Shack

Radio Shack 43-1088 Bedienungsanleitung

Radio Shack

Radio Shack 43-3704 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller... Bedienungsanleitung

Radio Shack

Radio Shack ET-598 Bedienungsanleitung

Radio Shack

Radio Shack ET-531 Bedienungsanleitung

Radio Shack

Radio Shack 43-3580 Bedienungsanleitung

Radio Shack

Radio Shack 900MHz Hands-free Phone Bedienungsanleitung

Radio Shack

Radio Shack ET-536 Bedienungsanleitung

Radio Shack

Radio Shack 43-325 Bedienungsanleitung

Radio Shack

Radio Shack ET-1125 Bedienungsanleitung

Radio Shack

Radio Shack ET-910 Bedienungsanleitung

Radio Shack

Radio Shack 43-3701 Bedienungsanleitung

Radio Shack

Radio Shack ET-1123 Bedienungsanleitung

Radio Shack

Radio Shack ET-1126 Bedienungsanleitung

Radio Shack

Radio Shack ET-543 Bedienungsanleitung

Radio Shack

Radio Shack 43-3570 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1015 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung