Radio Shack ET-1123 Bedienungsanleitung

Cat. No. 43-1123

OWNER’S MANUAL

ET-1123

Please read before using this equipment.

900 MHz Digital Dual Keypad

Cordless Phone

with Speakerphone and

Caller ID/Call Waiting

43-1123.fm Page 1 Tuesday, September 5, 2000 11:13 AM

RadioShack and COM-LOK are registered trademarks used by RadioShack Corporation.

FEATURES

Your RadioShack Digital 900 MHz Dual

Keypad Cordless Speakerphone oper-

ates on the 900 MHz band, which

means less interference, clearer sound,

and greater range than 46/49 MHz cord-

less telephones. The Caller ID records

each caller's telephone number (and

name, if available in your area) and the

date and time of the call. If you sub-

scribe to Call Waiting with Caller ID ser-

vice, your phone shows you the

incoming caller information, even when

you are already on the phone.

Your phone’s feature’s include:

Dual Keypad — let you use the keypad

on the base or on the handset to make

and answer calls or program the

phone's features.

Speakerphone — lets you hold a con-

versation handsfree from the base inter-

com speaker.

30-Number Memory Dialing — lets you

store 30 numbers in memory (20 in the

handset, 10 in the base) for easy dialing.

4 One-Touch Speed Dial Memory —

lets you store four numbers on the base

for one-touch dialing.

Caller ID Memory — stores up to 50

Caller ID records on the handset.

Dual Liquid Crystal Displays — lets

you view an entire Caller ID record on

the handset or base display.

WARNING: To reduce the risk of fire

or shock hazard, do not expose this

product to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to alert

you to the presence of uninsu-

lated dangerous voltage within

the product’s enclosure that might

be of sufficient magnitude to con-

stitute a risk of electric shock. Do

not open the product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature accom-

panying this product.

43-1123.fm Page 2 Tuesday, September 5, 2000 11:13 AM

Two-Way Intercom/Paging System —

lets you send a signal from the base to

the handset, or from the handset to the

base, to locate the handset or page

someone using it away from the base. If

someone answers the page, you can

use the phone as an intercom and

speak to the person on the handset.

30 Channels — automatically selects a

clear channel when you make or answer

a call. You can also manually change

channels during a call.

Headset Jack — lets you connect an

optional headset for handsfree conve-

nience.

Volume Controls — let you adjust the

volume you hear through the handset

and speakerphone.

Ringer Volume Control — lets you se-

lect from four ringer tone/volume set-

tings on the handset.

Security Access-Protection Code —

helps prevent other cordless phone us-

ers from using your phone line while the

handset is off the base.

COM-LOK — ensures that other cord-

less phone users cannot use your phone

line when the handset is on the base.

Long Battery Life — the supplied bat-

tery pack (when fully charged) provides

about 7 hours of talk time or 7 days of

standby time.

Tone/Pulse Dialing — lets you use ei-

ther type of service, and you can easily

switch from pulse to tone dialing for

long-distance, bank-by-phone, or other

special services.

Redial — lets you quickly redial any of

the last three numbers dialed on the

handset. You can also redial the last

number you dialed on the base.

Auto Talk — you can set the phone so

you can answer a call simply by lifting

the handset from the base.

Any Key Answer — you can set the

phone so you can press any key to an-

swer a call when the handset is away

from the base.

Hearing-Aid Compatibility — lets you

use your phone with hearing aids that

have a T (telephone) switch.

Facedown/Faceup Handset Charging

— you can charge the handset on the

base facedown or faceup.

Wall Mountable — you can mount the

phone base on a wall to save space on

your desktop.

43-1123.fm Page 3 Tuesday, September 5, 2000 11:13 AM

Important Caller ID Information

To use the phone's Caller ID and Caller

ID with Call Waiting features, you must

be in an area where those services are

available and you must subscribe to

those services through your local phone

company.

Where Caller ID is offered, one or more

options are generally available:

• caller's number only

• caller's name only

• caller's name and number

READ THIS BEFORE

INSTALLATION

We have designed your phone to con-

form to federal regulations, and you can

connect it to most telephone lines. How-

ever, each device that you connect to

the phone line draws power from the

phone line. We refer to this power draw

as the device's ringer equivalence num-

ber, or REN. The REN is on the bottom

of the base. If you are using more than

one phone or other device on the line,

add up all the RENs. If the total is more

than five (three in rural areas), your

phones might not ring. If ringer operation

is impaired, remove a device from the

line.

FCC STATEMENT

Your phone complies with Part 68 of

FCC Rules. You must, upon request,

provide the FCC registration number

and the REN to your phone company.

These numbers are on the bottom of the

base.

You must not connect your phone to any

of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

Note: Your telephone operates on stan-

dard radio frequencies, as allocated by

the FCC. Even though the security ac-

cess-protection code prevents unautho-

rized use of your phone line, it is

possible for radios operating on similar

frequencies within a certain area to unin-

tentionally intercept your conversations

and/or cause interference. This lack of

privacy can occur with any cordless

phone.

43-1123.fm Page 4 Tuesday, September 5, 2000 11:13 AM

CONTENTS

Preparation .............................................................................................................. 6

Mounting the Phone ........................................................................................... 6

Connecting and Charging the Battery Pack ....................................................... 8

Setting the Dialing Mode .................................................................................... 9

Turning the Base Ringer On/Off ....................................................................... 10

Setting the Handset’s Ringer Tone/Volume ...................................................... 10

Setting Auto Talk .............................................................................................. 10

Turning Caller ID/Call Waiting On/Off ............................................................... 10

Storing Your Area Code ................................................................................... 11

Operation ............................................................................................................... 12

Making a Call .................................................................................................... 12

Receiving a Call ............................................................................................... 12

Adjusting the Handset Volume ......................................................................... 13

Selecting the Channel ...................................................................................... 13

Using Mute ....................................................................................................... 13

Switching Between the Handset and the Speakerphone ................................. 13

Using Both the Handset and the Speakerphone .............................................. 14

Using Flash ...................................................................................................... 14

Using Redial ..................................................................................................... 14

Using Tone Services On a Pulse Line .............................................................. 14

Using Page/Intercom ........................................................................................ 15

Transferring a Call Between the Handset and the Base .................................. 15

Out of Range .................................................................................................... 16

Using a Headset ............................................................................................... 16

Memory Dialing ................................................................................................ 17

Caller ID Operation ........................................................................................... 20

Troubleshooting .................................................................................................... 23

Care and Maintenance .......................................................................................... 25

Replacing the Battery Pack .............................................................................. 26

The FCC Wants You to Know ........................................................................... 27

Lightning ........................................................................................................... 27

43-1123.fm Page 5 Tuesday, September 5, 2000 11:13 AM

PREPARATION

Note: The base unit display is protected

during shipment by a piece of clear film.

Carefully peel off this film before using

your phone for the first time.

MOUNTING THE PHONE

You can place the phone's base on a

desk or table, mount it on a standard

wall plate, or mount it directly on a wall.

Choose a location that is:

• near an AC outlet

• near a modular telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base's location affects the phone's

range. If you have a choice of several lo-

cations, try each to see which provides

the best performance.

Caution: The supplied RadioShack

adapter was designed specifically for

your phone. Use only the supplied

adapter.

Notes:

• Your telephone connects directly to

a modular telephone line jack. If

your phone line jack is not a modu-

lar jack, you can update the wiring

yourself, using jacks and adapters

available at your local RadioShack

store. Or, you can let the phone

company update the wiring for you.

• The USOC number of the jack to be

installed is RJ11C (RJ11W for a wall

plate).

On a Desk Top

1. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base.

2. Plug the modular cord's other end

into a modular telephone line jack.

3. Insert the supplied AC adapter's

barrel plug into the DC IN 9V jack on

the back of the base.

4. Route the adapter's cord through

the strain relief slot on the bottom of

the base.

Strain Relief Slot

43-1123.fm Page 6 Tuesday, September 5, 2000 11:13 AM

5. Plug the adapter into a standard AC

outlet.

6. Lift the base's antenna to a vertical

position.

On a Wall Plate

1. Detach the stand from the base by

pressing the latches on the stand.

2. Insert the two tabs at the top of the

narrow end of the supplied bracket

into the base's upper tab slots as

shown, then press down on the

bracket's latches and insert them

into the lower slots.

3. Plug one end of the supplied short

modular cord into the TEL LINE jack

on the back of the base as in Step 1

of “On a Desk Top” on Page 6.

4. Insert the supplied AC adapter's

barrel plug into the DC IN 9V jack as

in Step 3 of “On a Desk Top” on

Page 7.

5. Route the adapter and modular

cords through the grooves on the

bracket.

6. Plug the modular cord's other end

into the wall plate jack, then align

the bracket's keyhole slots with the

wall plate studs and slide the base

downward to secure it.

7. Plug the adapter into a standard AC

outlet.

8. Press and lift out the handset

holder, flip it over as shown, then

snap it back into place so it holds

the handset.

9. Lift the base's antenna to a vertical

position.

Stand

Bracket

Adapter

and

Modular

Cord

Grooves

43-1123.fm Page 7 Tuesday, September 5, 2000 11:13 AM

On a Wall

To mount the phone directly on a wall,

you need two screws (not supplied) with

heads that fit into the keyhole slots on

the bottom of the base. Follow the steps

under “On a Wall Plate” on Page 7, then

apply these additional instructions for

placement on a wall.

1. Drill two holes 315/16

inches (100 mm) apart.

Then thread a screw

into each hole, letting

the heads extend about

5/16 inch (8 mm) from the

wall.

2. Plug one end of the supplied long

modular cord into the TEL LINE jack

at the back of the base.

3. Align the bracket's keyhole slots

with the mounting screws and slide

the base downward to secure it.

CONNECTING AND

CHARGING THEBATTERY

PACK

The phone comes with a rechargeable

nickel-cadmium battery pack installed in

the handset, but not connected. Before

using your phone, you must connect the

battery pack, then charge it for about 24

hours.

1. Press down and slide off the battery

pack compartment cover.

2. Lift the battery pack out of the com-

partment. Plug the battery pack's

connector into the socket in the

compartment. The connector fits

only one way.

3. Put the battery pack in the compart-

ment.

4. Replace the cover.

To charge the battery pack, simply place

the handset on the base, facing either

up or down. The CHARGE/IN USE indi-

cator on the base lights.

Recharge the battery pack when Low

Battery flashes on the handset's dis-

play.

43-1123.fm Page 8 Tuesday, September 5, 2000 11:13 AM

Important: Be sure the battery pack is

properly connected before you try to

charge it.

Notes:

• When you first use the phone after

charging or recharging the battery

pack, the phone might not work and

you might hear a five-beep error sig-

nal. If this happens, return the hand-

set to the base for about 5 seconds.

This resets the security access-pro-

tection code.

• Using a pencil eraser, clean the

charging contacts on the handset

and the base about once a month.

• If the handset's display is blank and

the phone does not work, recharge

the battery pack. (The battery power

might be too low to light the display.)

• If the battery pack becomes weak

during a call, the handset beeps

every 3 seconds and Low Bat-

tery flashes. When this happens,

you cannot make another call on the

phone until you recharge the battery

pack.

• About once a month, fully discharge

the battery pack by keeping the

handset off the base until Low

Battery flashes. Otherwise, the

battery pack loses its ability to fully

recharge.

• If the battery pack is completely dis-

charged or the base loses power

while the handset is away from it,

place the handset on the base to

reset the security access-protection

code. If it was the handset that lost

power, recharge the battery pack.

• The supplied battery pack should

last about a year. When it loses its

ability to fully recharge, order a

replacement battery pack through

your local RadioShack store (see

“Replacing the Battery Pack” on

Page 26).

SETTING THE DIALING

MODE

Set DIAL MODE P- -T on the back of the

base for the type of service you have. If

you are not sure which type you have,

after you charge the handset battery

pack, do this simple test.

1. Set DIAL MODE P- -T to -T.

2. Press SPEAKER and listen for a dial

tone.

3. Press any number other than 0on

the base's keypad.

Note: If your phone system requires

that you dial an access code (9, for

example) before you dial an outside

number, do not press the access

code number either.

43-1123.fm Page 9 Tuesday, September 5, 2000 11:13 AM

If the dial tone stops, you have

touch-tone service. Leave DIAL

MODE P- -T set to -T. If the dial tone

continues, you have pulse service.

Set DIAL MODE P- -T to P-.

4. Press SPEAKER to hang up.

TURNING THE BASE

RINGER ON/OFF

To turn off the base's ringer

, set RINGER

on the back of the base to OFF. You can

still make or receive calls using this

phone. Telephones on the same line

(and the phone's handset if it is away

from the base) still ring when there is an

incoming call.

To turn on the base's ringer

, set RINGER

to ON.

SETTING THE HANDSET’S

RINGER TONE/VOLUME

You can select one of four different ring-

er tone/volume settings while the phone

is not in use. Press 8

8or 9

9on the

handset to increase or decrease to the

ringer level setting. Repeatedly press

8or 9

9until you hear the desired ring-

er setting. Each time you press 8

8or

9, the ringer changes and the display

shows Ringer AHigh, Ringer A

Low, Ringer BHigh, or Ringer B

Low.

Note: Pressing 8

8when the display

shows

Ringer AHigh or 9

9when the

display shows Ringer BLow does not

change the setting. Press the other but-

ton to change the setting.

SETTING AUTO TALK

Your phone is preset so you must press

TALK to answer a call. With auto talk

turned on, you can answer a call by just

lifting the handset from the base, or, if

the handset is away from the base, by

pressing any key.

Follow these steps to turn auto talk on or

off.

1. Lift the handset and hold down

CALL ID until the Caller ID setup

menu appears with Auto Talk

selected.

2. Press SELECT to change the auto

talk setting. On or Off appears indi-

cating the selected setting.

3. Press CALL ID or return the handset

to the base to store the new setting.

TURNING CALLER ID/

CALL WAITING ON/OFF

If you have Call Waiting with Caller ID

service, you can set the phone to show

Caller ID information for an incoming call

even while you are already on the

phone.

Follow these steps to turn the Caller ID/

Call Waiting feature on or off.

43-1123.fm Page 10 Tuesday, September 5, 2000 11:13 AM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack ET-687 Bedienungsanleitung

Radio Shack

Radio Shack 43-3548 Bedienungsanleitung

Radio Shack

Radio Shack 900MHz Hands-free Phone Bedienungsanleitung

Radio Shack

Radio Shack 43-3505 Bedienungsanleitung

Radio Shack

Radio Shack 43-3537 Bedienungsanleitung

Radio Shack

Radio Shack 43-3558 Bedienungsanleitung

Radio Shack

Radio Shack 43-3549 Bedienungsanleitung

Radio Shack

Radio Shack ET-531 Bedienungsanleitung

Radio Shack

Radio Shack ET-546 Bedienungsanleitung

Radio Shack

Radio Shack Cordless Telephone Bedienungsanleitung

Radio Shack

Radio Shack 43-3514 Bedienungsanleitung

Radio Shack

Radio Shack 43-3575 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call... Bedienungsanleitung

Radio Shack

Radio Shack ET-910 Bedienungsanleitung

Radio Shack

Radio Shack 43-143 Bedienungsanleitung

Radio Shack

Radio Shack TAD-733 Bedienungsanleitung

Radio Shack

Radio Shack 43-3815/43-3898 Bedienungsanleitung

Radio Shack

Radio Shack 43-325 Bedienungsanleitung

Radio Shack

Radio Shack 43-5560 Bedienungsanleitung

Radio Shack

Radio Shack ET-153 Bedienungsanleitung

Radio Shack

Radio Shack 43-5862 Bedienungsanleitung

Radio Shack

Radio Shack ET-1111 Bedienungsanleitung

Radio Shack

Radio Shack 43-142 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1015 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung