Radio Shack ET-687 Bedienungsanleitung

Cat. No. 43-687

OWNER’S MANUAL

Please read before using this equipment.

ET-687

Two-Line 900MHz Digital Spread Spectrum

Cordless Telephone

43-687.fm Page 1 Friday, August 13, 1999 11:12 AM

FEATURES

Your RadioShack ET-687 Two-Line

900MHz Digital Spread Spectrum Cord-

less Telephone lets you place and re-

ceive calls on two separate telephone

lines. It is designed to exacting stan-

dards that ensure reliability, long life, and

outstanding performance.

Its features include:

Spread Spectrum Technolo

—

spreads the signal across several fre-

quencies, providing additional security

for your phone conversations.

900 MHz Operation — provides longer

range and less interference than many

other cordless phones.

Ample Talk and Standb

Time — the

supplied battery pack (when fully

charged) provides 4 hours of continuous

talk time or 7 days of standby time.

20-Number Memor

Dialin

— lets you

store up to 20 numbers in memory (ten

each in the handset and base) for easy

dialing.

/Two-Wa

Intercom — lets you

send a signal from the base to the handset,

or from the handset to the base, to page

someone or locate the handset when it is

away from the base. If someone answers,

you can use the ET-687 as an intercom.

Dual Ke

pads — a full set of keys on

both the ET-687’s handset and base lets

you use either keypad to make and an-

swer calls or use the phone’s features.

Handset Volume Control — lets you

adjust the volume of the sound you hear

through the handset.

Two-Line Telephone S

stem — lets

you easily handle two telephone lines at

the same time. You can also use both lines

at once to make three- or four-way confer-

ence calls.

Line Status Indicators — show if a line

is available, in use, or on hold.

Speakerphone — lets you make or an-

swer calls without using the handset.

Headset Jack — lets you talk with

hands-free convenience using an option-

al headset.

20 Channels — automatically selects a

clear channel when you make or answer a

call.

Securit

Access-Protection Code —

automatically prevents other cordless

phone users from using your phone line

while the handset is off the base.

ustable Rin

ers — give you two vol-

ume settings for the handset and base

ringers.

Answer — you can answer a

call by pressing any number key on the

handset or base.

COM-LOK®— ensures that other cord-

less phone users cannot use your phone

line when the handset is on the base.

COM-LOK and RadioShack are registered trademarks used by Tandy Corporation.

43-687.fm Page 2 Friday, August 13, 1999 11:12 AM

Redial — lets you quickly redial the last

number dialed.

Flash — sends an electronic switchhook

signal for use with special phone servic-

es, such as Call Waiting.

Tone/Pulse Dialing — lets you use ei-

ther type of service, and you can easily

switch from pulse to tone dialing for spe-

cial services such as bank-by-phone.

Hearing-Aid Compatibility — lets you

use your phone with hearing aids that

have a T (telephone) switch.

This telephone has been tested and

found to comply with all applicable stan-

dards.

We recommend you record your phone’s

serial number here. The number is on

the bottom of the base.

Serial Number: __________________

Important Note: Cordless phones such

as your ET-687 require AC power to op-

erate. When the AC power is off, you

cannot dial out or receive incoming calls

using this phone. To be safe, you should

also have a phone that does not need AC

power to operate (not a cordless phone)

so you can still make and receive calls if

there is an AC power failure.

Your telephone operates on standard ra-

dio frequencies as allocated by the FCC.

Even though the security access-protec-

tion code prevents unauthorized use of

your phone line, it is possible for other

radio units operating on similar frequen-

cies within a certain area to unintention-

ally intercept your conversations and/or

cause interference. This lack of privacy

can occur with any cordless phone.

This symbol is intended to alert you to

the presence of uninsulated danger-

ous voltage within the product’s enclo-

sure that might be of sufficient

magnitude to constitute a risk of elec-

tric shock. Do not open the product’s

case.

This symbol is intended to inform you

that important operating and mainte-

nance instructions are included in the

literature accompanying this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

Warning: To reduce the risk of fire

or shock hazard, do not expose

this product to rain or moisture.

CAUTION

43-687.fm Page 3 Friday, August 13, 1999 11:12 AM

READ THIS BEFORE

INSTALLATION

Each device that you connect to the

phone line draws power from the phone

line. We refer to this power draw as the

device’s

ringer equivalence number

, or

REN. The REN for your ET-687 is on the

bottom of the base.

If you are using more than one phone or

other device on the line, add up all the

RENs. If the total is more than five, your

phones might not ring. In rural areas, a

total REN of three might impair ringer op-

eration. If ringer operation is impaired,

remove a device from the line.

FCC STATEMENT

This telephone complies with Part 68 of

FCC Rules

. Upon request, you must pro-

vide the FCC registration number and

the REN to your phone company. These

numbers are on the bottom of the base.

Note: You must not connect your phone

to any of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

43-687.fm Page 4 Friday, August 13, 1999 11:12 AM

CONTENTS

Installation ............................................................................................................ 6

Mounting the Phone ........................................................................................ 6

Connecting to the Phone Lines ................................................................. 6

On a Desk Top .......................................................................................... 7

On a Wall Plate ......................................................................................... 8

Directly on a Wall ...................................................................................... 9

Connecting and Charging the Battery Pack .................................................. 11

Setting the Dialing Mode ............................................................................... 13

Setting the Ringers’ Volume .......................................................................... 13

Operation ............................................................................................................ 14

Using the Handset ......................................................................................... 14

Making a Call .......................................................................................... 14

Answering Calls ...................................................................................... 14

Setting the Handset Volume ................................................................... 14

Using the Speakerphone ............................................................................... 15

Making a Call .......................................................................................... 15

Answering a Call ..................................................................................... 15

Adjusting the Speakerphone Volume ...................................................... 15

Using Mute .............................................................................................. 15

Putting a Call on Hold .................................................................................... 16

Using Redial .................................................................................................. 16

Switching Between the Handset and Speakerphone .................................... 16

Using Both the Handset and Speakerphone ................................................. 17

Making a Conference Call ............................................................................. 17

Three-Way Conference Call ................................................................... 17

Four-Way Conferencing .......................................................................... 17

Using the ET-687 With Extension Phones .................................................... 18

Using Flash ................................................................................................... 18

Using Tone Services on a Pulse Line ............................................................ 18

Using Page/Intercom ..................................................................................... 19

Memory Dialing ............................................................................................. 20

Storing a Number in Memory .................................................................. 20

Entering a Pause .................................................................................... 21

Dialing a Memory Number ...................................................................... 21

Chain-Dialing Service Numbers .............................................................. 21

Testing Stored Emergency Numbers ...................................................... 21

Using a Headset ............................................................................................ 22

Troubleshootin

................................................................................................. 23

Care and Maintenance ....................................................................................... 25

Replacing the Battery Pack ........................................................................... 26

The FCC Wants You to Know ........................................................................ 27

Lightning ........................................................................................................ 27

43-687.fm Page 5 Friday, August 13, 1999 11:12 AM

INSTALLATION

MOUNTING THE PHONE

You can place the ET-687’s base on a

desk or table, or mount it on a standard

wall plate or directly on a wall. Choose a

location that is:

• near an AC outlet

• near a modular telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the handset’s

range. If you have a choice of several lo-

cations, try each to see which provides

the best performance.

Caution: The supplied RadioShack

adapter was designed specifically for

your ET-687. Use only the supplied

adapter.

Connecting to the Phone Lines

To take full advantage of the ET-687’s

capabilities, you must have two phone

lines with separate phone numbers. If

you have only one line, you can order a

second from your phone company.

You can connect the ET-687 to the tele-

phone lines in one of three ways:

• connect two lines through a two-line

modular phone jack

• connect two lines through two one-

line modular phone jacks

• connect one line through a one-line

modular phone jack.

Notes:

• Your phone connects directly to a

modular phone line jack. If your

phone wiring does not have a modu-

lar jack, you can update it using

jacks and adapters available at your

local RadioShack store, or have the

phone company update it for you.

• The line that connects a two-line

phone jack to the phone company

wiring must be twisted-pair cable.

Otherwise, you might hear interfer-

ence (crosstalk) between the two

lines.

• The USOC number of the two-line

jack to be installed is RJ14C

(RJ14W for a wall plate). The USOC

number of a single-line jack is

RJ11C.

43-687.fm Page 6 Friday, August 13, 1999 11:12 AM

On a Desk Top

1. Insert the bracket’s tabs into the

base’s upper tab slots as shown,

then press down on the bracket’s

clips and insert them into the clip

slots.

To connect the phone to a two-line

phone jack

, plug one end of the sup-

plied two-line phone cord into the

TEL LINE 1/2 jack on the back of the

phone. Route the cord through the

strain-relief slot on the bracket.

Note: If you connect the phone to a

two-line phone jack with a two-line

cord, do not connect a cord to the

TEL LINE 2jack or the phone might

not operate properly.

To connect the phone to two one-

line phone jacks

, plug one end of

the supplied two-line cord to the TEL

LINE 1/2 jack, and plug another cord

(not supplied) into the TEL LINE 2

jack. Route both cords through the

strain-relief slot on the bracket.

Clips Clip Slots

Upper Tab Slots

Strain

Relief

Slot

To connect the phone to a single

one-line phone jack

, plug one end of

the supplied cord into the TEL LINE

1/2 or TEL LINE 2jack. Route the

cord through the strain-relief slot on

the bracket.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

4. Route the adapter’s cord through

the strain relief slot on the bottom of

the bracket.

5. Plug the adapter into a standard AC

outlet.

Strain

Relief

Slot

Strain

Relief

Slot

43-687.fm Page 7 Friday, August 13, 1999 11:12 AM

6. Connect the phone cord(s) to the

modular phone line jack(s).

7. Lift the base’s antenna to a vertical

position.

On a Wall Plate

1. Insert the bracket’s tabs into the

base’s lower tab slots as shown,

then press down on the bracket’s

clips and insert them into the clip

slots.

To connect the phone to a two-line

wall plate jack

, plug one end of the

supplied short, two-line phone cord

into the TEL LINE 1/2 jack on the

back of the phone.

Note: If you connect the phone to a

two-line phone jack with a two-line

cord, do not connect a cord to the

TEL LINE 2jack or the phone might

not operate properly.

To connect the phone to a one-line

wall plate jack and another one-line

jack

, plug one end of the supplied

short, two-line cord to the TEL LINE

1/2 jack, and plug another cord (not

supplied) into the TEL LINE 2 jack.

To connect the phone to a single

one-line wall plate jack

, plug one

end of the supplied cord into the TEL

LINE 1/2 or TEL LINE 2jack.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack.

Tabs

Lower Tab Slots

Clip Slots

43-687.fm Page 8 Friday, August 13, 1999 11:12 AM

4. Route the adapter cord through the

narrow groove on the bracket. If you

are using two phone cords, route

the second cord through one of the

wide grooves on the bracket.

5. Plug the other end of the short mod-

ular cord into the wall plate jack,

then align the bracket’s keyhole

slots with the wall plate studs and

slide the base downward to secure

it. If you are using two phone cords,

plug the second cord into the sec-

ond phone jack.

6. Plug the adapter into a standard AC

outlet.

7. Press and lift out the handset

holder, flip it over as shown, then

snap it back into place.

8. Lift the base’s antenna to a vertical

position.

Directly on a Wall

To mount the base directly on the wall,

you need two screws (not supplied) with

heads that fit into the keyhole slots on the

bottom of the base.

1. Drill two holes 315/16

inches (100 mm)

apart. Then thread a

screw into each hole,

letting the heads ex-

tend about 5/16 inch (8

mm) from the wall.

Narrow

Groove

Wide

Grooves

5/16"

315/16"

43-687.fm Page 9 Friday, August 13, 1999 11:12 AM

2. Insert the bracket’s tabs into the

base’s lower tab slots as shown,

then press down on the bracket’s

clips and insert them into the clip

slots.

To connect the phone to a two-line

phone jack

, plug one end of the sup-

plied two-line phone cord into the

TEL LINE 1/2 jack on the back of the

phone.

Note: If you connect the phone to a

two-line phone jack with a two-line

cord, do not connect a cord to the

TEL LINE 2jack or the phone might

not operate properly.

To connect the phone to two one-

line phone jacks

, plug one end of

the supplied two-line cord to the TEL

LINE 1/2 jack, and plug another cord

(not supplied) into the TEL LINE 2

jack.

Tabs

Lower Tab Slots

Clip Slots

To connect the phone to a single

one-line phone jack

, plug one end of

the supplied cord into the TEL LINE

1/2 or TEL LINE 2jack.

4. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack.

5. Route the modular and adapter’s

cords through the grooves on the

bracket as shown. If you are using

two phone cords, route the second

cord through one of the wide

grooves on the bracket. Grooves

43-687.fm Page 10 Friday, August 13, 1999 11:12 AM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack 43-3556 Bedienungsanleitung

Radio Shack

Radio Shack ET-546 Bedienungsanleitung

Radio Shack

Radio Shack Digital Answering System with Caller ID Deluxe and 2.4 GHz Digital Spread Spectrum Cordless... Bedienungsanleitung

Radio Shack

Radio Shack Big-Button Caller ID Trim Fone 43-3904 Bedienungsanleitung

Radio Shack

Radio Shack 43-164 Bedienungsanleitung

Radio Shack

Radio Shack 43-5560 Bedienungsanleitung

Radio Shack

Radio Shack ET-908 Bedienungsanleitung

Radio Shack

Radio Shack ET-905 Bedienungsanleitung

Radio Shack

Radio Shack 43-3704 Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack 2-Line 900 MHz Handsfree Cordless Phone Bedienungsanleitung

Radio Shack

Radio Shack 43-3581 Bedienungsanleitung

Radio Shack

Radio Shack 43-3526 Bedienungsanleitung

Radio Shack

Radio Shack ET-689 Bedienungsanleitung

Radio Shack

Radio Shack 43-143 Bedienungsanleitung

Radio Shack

Radio Shack 43-324 Bedienungsanleitung

Radio Shack

Radio Shack 43-3821 Bedienungsanleitung

Radio Shack

Radio Shack 43-3535 Bedienungsanleitung

Radio Shack

Radio Shack 4301122D Bedienungsanleitung

Radio Shack

Radio Shack 43-1107 Bedienungsanleitung

Radio Shack

Radio Shack ET-929 Bedienungsanleitung

Radio Shack

Radio Shack 43-3814 Bedienungsanleitung

Radio Shack

Radio Shack 43-325 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung