Radio Shack ET-1111 Bedienungsanleitung

Cat. No. 43-1111

OWNER’S MANUAL

Please read before using this equipment.

ET-1111

900 MHz Digital Spread Spectrum

Cordless Telephone

with Caller ID/Call Waiting ID

43-1111.fm Page 1 Tuesday, June 29, 1999 3:38 PM

FEATURES

RadioShack is a registered trademark used by Tandy Corporation.

Your RadioShack ET-1111 900 MHz

Digital Spread Spectrum Cordless Tele-

phone uses advanced cordless tele-

phone technology to give you superior

audio quality and extended range.

The ET-1111’s Caller ID unit records

each caller’s telephone number (and

name, if available in your area) and the

day and time of the call, as provided by

your local phone company to Caller ID

service subscribers. If you subscribe to

Call Waiting with Caller ID, the ET-1111

can show you the incoming caller infor-

mation, even when you are already on

the phone.

Your ET-1111 has these features:

900 MHz Operation — provides longer

range and less interference than many

other cordless phones.

Spread Spectrum Technology —

spreads the signal across several fre-

quencies, providing additional security

for your phone conversations.

Caller ID Memory — stores up to 50

Caller ID records.

3-Line Liquid Crystal Display — lets

you view an entire Caller ID record on

one screen.

10-Number Memory Dialing — lets you

store up to 10 numbers in memory for

easy dialing.

Volume Control — lets you adjust the

volume you hear through the handset.

Adjustable Ringer — lets you choose

high or low volume for the ET-1111’s

ringer.

Page/Find — lets you send a signal

from the base to the handset to page

someone or to help you locate the hand-

set if you have misplaced it.

Facedown or Faceup Handset Charg-

ing — you can place the handset on the

base facedown or faceup (to show the

Caller ID display, for example).

Ample Talk and Standby Time — the

supplied battery (when fully charged)

provides about 4 hours of talk time or 7

days of standby time.

20 Channels — automatically selects a

clear channel when you make or answer

a call.

Security Access-Protection Code —

automatically prevents other cordless

phone users from using your phone line

while the handset is off the base.

Redial — lets you quickly redial the last

number dialed.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as Call Waiting.

43-1111.fm Page 2 Tuesday, June 29, 1999 3:38 PM

Tone/Pulse Dialing — lets you use ei-

ther type of service, and you can easily

switch from pulse to tone dialing for

long-distance, bank-by-phone, or other

special services.

Auto Talk — you can set the phone so

you can answer a call simply by lifting

the handset from the base.

Any Key Answer — you can set the

phone so you can press any key on the

handset to answer a call when the hand-

set is away from the base.

Hearing-Aid Compatibility — lets you

use your phone with hearing aids that

have a T (telephone) switch.

This telephone has been tested and

found to comply with all applicable FCC

standards and is UL listed.

We recommend you record your

phone’s serial number here. The num-

ber is on the bottom of the base.

Serial Number __________________

Important Caller ID Information

To use the phone’s Caller ID and Caller

ID with Call Waiting features, you must

be in an area where those services are

available and you must subscribe to

those services through your local phone

company.

Where Caller ID is offered, one or more

options are generally available:

• caller’s number only

• caller’s name only

• caller’s name and number

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to rain

or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to alert

you to the presence of uninsu-

lated dangerous voltage within

the product’s enclosure that might

be of sufficient magnitude to con-

stitute a risk of electric shock. Do

not open the product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature accom-

panying this product.

43-1111.fm Page 3 Tuesday, June 29, 1999 3:38 PM

Important:

• Cordless phones such as this one

require AC power to operate. When

the AC power is off, you cannot dial

out or receive incoming calls using

your ET-1111. To be safe, you

should also have a phone that does

not need AC power to operate (not a

cordless phone) so you can still

make and receive calls if there is an

AC power failure.

• When the battery pack is completely

discharged, the ET-1111 loses the

security access-protection code

connection between the base and

the handset. Recharge or replace

the battery pack and place the

handset on the base to restore the

code.

READ THIS BEFORE

INSTALLATION

We have designed your phone to con-

form to federal regulations and you can

connect it to most phone lines. However,

each device that you connect to the tele-

phone line draws power from the line.

We refer to this power draw as the

phone’s

ringer

equivalence

number

, or

REN. The REN is on the bottom of your

phone.

If you use more than one phone or other

device on the line, add up all the RENs.

If the total is more than five, your phones

might not ring. In rural areas, a total

REN of three might impair ringer opera-

tion. If ringer operation is impaired, re-

move one of the devices from the line.

FCC STATEMENT

Your telephone complies with Part 68 of

FCC Rules

. You must, upon request,

provide the FCC registration number

and the REN to your phone company.

These numbers are on the bottom of the

base.

You must not connect your phone to any

of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

This equipment complies with the limits

for a Class B digital device as specified

in Part 15 of

FCC

Rules

. These limits

provide reasonable protection against

radio and TV interference in a residential

area. However, your equipment might

cause TV or radio interference even

when it is operating properly. To elimi-

nate interference, you can try one or

more of the following corrective mea-

sures.

• Reorient or relocate the receiving

antenna.

• Increase the distance between the

equipment and the radio or TV.

• Use outlets on different electrical cir-

cuits for the equipment and the ra-

dio or TV.

Consult your local RadioShack store if

the problem still exists.

43-1111.fm Page 4 Tuesday, June 29, 1999 3:38 PM

CONTENTS

Installation ............................................................................................................... 6

Mounting the Phone ........................................................................................... 6

On a Desk .................................................................................................... 6

On a Wall Plate or Wall ................................................................................ 7

Connecting and Charging the Battery Pack ....................................................... 8

Setting the Dialing Mode .................................................................................... 9

Setting the Ringer’s Volume ............................................................................. 10

Setting Auto Talk .............................................................................................. 10

Turning Caller ID/Call Waiting On/Off ............................................................... 10

Storing Your Area Code ................................................................................... 11

Telephone Operation ............................................................................................ 12

Making and Receiving Calls ............................................................................. 12

Adjusting the Handset Volume ......................................................................... 12

Using Redial ..................................................................................................... 12

Using Flash ...................................................................................................... 12

Using Tone Services on a Pulse Line ............................................................... 13

Paging .............................................................................................................. 13

Memory Dialing ................................................................................................ 13

Storing a Name and Number in Memory ................................................... 13

Editing or Deleting a Number in Memory ................................................... 15

Entering a Pause ....................................................................................... 15

Reviewing Memory Numbers ..................................................................... 15

Dialing a Memory Number ......................................................................... 16

Chain-Dialing Service Numbers ................................................................. 16

Testing Stored Emergency Numbers ......................................................... 16

Using a Headset ............................................................................................... 16

Caller ID Operation ............................................................................................... 18

Reviewing Caller ID Records ........................................................................... 18

Storing a Caller ID Record to Memory ............................................................. 18

Dialing Numbers from a Caller ID Record ........................................................ 19

Deleting Caller ID Records ............................................................................... 19

Caller ID Messages ................................................................................... 20

Troubleshooting .................................................................................................... 21

Care and Maintenance .......................................................................................... 23

Replacing the Battery Pack .............................................................................. 24

The FCC Wants You to Know ........................................................................... 25

Lightning ........................................................................................................... 25

43-1111.fm Page 5 Tuesday, June 29, 1999 3:38 PM

INSTALLATION

MOUNTING THE PHONE

You can place the ET-1111’s base on a

desk or table, mount it on a standard

wall plate, or mount it directly on a wall.

Choose a location that is:

• near an AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of sev-

eral locations, try each to see which

provides the best performance.

Caution: You must use a Class

2 power source that supplies 9

volts DC and delivers at least

350 mA. Its center tip must be set to

positive and its plug must fit the ET-

1111's DC IN 9V jack. The supplied

adapter meets these specifications. Us-

ing an adapter that does not meet these

specifications could damage the ET-

1111 or the adapter.

The supplied RadioShack adapter was

designed specifically for your ET-1111.

Use only the supplied adapter.

Notes:

• Your telephone connects directly to

a modular phone line jack. If your

phone line jack is not a modular

jack, you can update the wiring

yourself, using jacks and adapters

available from your local Ra-

dioShack store. Or, you can let the

telephone company update the wir-

ing for you.

• The USOC number of the jack to be

installed is RJ11C, or RJ11W for a

wall plate jack.

On a Desk

Follow these steps when you place the

base on a desk or table.

1. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base.

2. Plug the modular cord’s other end

into a modular phone line jack.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

43-1111.fm Page 6 Tuesday, June 29, 1999 3:38 PM

4. Route the adapter’s cord through

the strain relief slot on the bottom of

the base.

5. Plug the adapter into a standard AC

outlet.

6. Lift the base’s antenna to a vertical

position.

On a Wall Plate or Wall

1. Plug one end of the supplied short

modular cord into the TEL LINE jack

on the back of the base as in “On a

Desk Top,” Step 1, on Page 6.

2. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack as

in “On a Desk,” Step 3, on Page 6.

3. Route the adapter and modular

cords through the grooves on the

bottom of the base.

4. Plug the modular cord’s other end

into the wall plate jack, then align

the base’s keyhole slots with the

wall plate studs and slide the base

downward to secure it.

5. Plug the adapter into a standard AC

outlet.

6. Press and lift out the handset hold-

er, rotate it 180°, then snap it back

into place so it holds the handset.

7. Lift the base’s antenna to a vertical

position.

Note: To mount the ET-1111 directly on

a wall, you need two screws (not sup-

plied) with heads that fit into the keyhole

slots on the bottom of the base.

Follow the steps under “On a Wall Plate

or Wall,” then apply these additional in-

structions for placement on a wall.

1. Drill two holes 315/16

inches (100 mm) apart.

Then thread a screw

into each hole, letting

the heads extend

about

5/16 inch (8 mm)

from the wall.

43-1111.fm Page 7 Tuesday, June 29, 1999 3:38 PM

2. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base.

3. Route the adapter and modular

cords through the grooves on the

bottom of the base.

4. Align the base’s keyhole slots with

the mounting screws and slide the

base downward to secure it.

CONNECTING AND

CHARGINGTHE BATTERY

PACK

The ET-1111 comes with a recharge-

able Ni-Cd battery pack in the handset

but not connected. Before using your

phone, you must connect the battery

pack, then charge it for about 24 hours.

1. Press down and slide off the battery

pack compartment cover as shown.

2. Lift the battery pack out of the com-

partment.

3. Plug the battery pack’s connector in-

to the socket in the compartment

(the connector fits only one way).

4. Replace the cover.

To charge the battery pack, place the

handset either faceup or facedown on

the base. The CHARGE/IN USE indica-

tor on the base lights and Total:00

appears on the handset display.

Recharge the battery pack when the

handset beeps every 3 seconds and

Low Battery flashes on the display

during a call. You cannot make another

call until you recharge the battery pack.

43-1111.fm Page 8 Tuesday, June 29, 1999 3:38 PM

Important: Be sure the battery pack is

properly connected before you try to

charge it. The CHARGE/INUSE indica-

tor lights when the handset is on the

base, even if the battery pack is not con-

nected.

Notes:

• When you first use the phone after

charging or recharging the battery

pack, the phone might not work and

you might hear an error tone when

you press TALK. If this happens, re-

turn the handset to the base for

about 5 seconds. This resets the se-

curity access-protection code.

• If the handset’s battery pack is com-

pletely depleted, the security ac-

cess-protection code might be lost.

To reset the code, return the hand-

set to the base for about 5 seconds.

• Using a pencil eraser, clean the

charging contacts on the handset

and the base about once a month.

• About once a month, fully discharge

the battery pack by keeping the

handset off the base until Low

Battery

flashes with the phone

off-hook. Otherwise, the battery

pack loses its ability to fully re-

charge.

• If the display is blank and the phone

does not work, recharge the battery

pack. (The battery power might be

too low to light the display.)

• If you are not going to use your

phone for an extended period of

time, disconnect the battery pack.

This increases the battery pack’s

usable life.

• The supplied battery pack should

last for about a year. When it loses

its ability to fully recharge, order a

replacement battery pack from your

local RadioShack store (see “Re-

placing the Battery Pack” on

Page 24).

SETTING THE DIALING

MODE

Set PULSE/TONE on the back of the

base for the type of service you have. If

you are not sure which type you have,

once the battery pack is fully charged,

perform this test.

1. Be sure PULSE/TONE is set to

TONE.

43-1111.fm Page 9 Tuesday, June 29, 1999 3:41 PM

2. Lift the handset, press TALK, and

listen for a dial tone.

3. Press any number other than 0.

Note: If your phone system requires

that you dial an access code (9, for

example) before you dial an outside

number, do not dial the access code

either.

If the dial tone stops, you have

touch-tone service. Leave PULSE/

TONE set to TONE.

If the dial tone continues, you have

pulse service. Set PULSE/TONE to

PULSE.

SETTING THE RINGER’S

VOLUME

Lift the handset from the base or leave

the handset faceup on the base. Press

or (except during a call) to set the

ringer volume. The phone rings at the

selected volume and the display shows

Ringer High or Ringer Low.

TALK

SETTING AUTO TALK

Your phone is preset so you must press

TALK to answer a call. With auto talk

turned on, you can answer a call by just

lifting the handset from the base, or, if

the handset is away from the base, by

pressing any key.

Follow these steps to turn auto talk on or

off.

1. Lift the handset and press FUNC-

TION. A menu appears with Auto

Talk selected.

2. Press SELECT to change the auto

talk setting. On or Off appears indi-

cating the selected setting.

3. To clear the display when you finish,

press FUNCTION or return the hand-

set to the base.

TURNING CALLER ID/

CALL WAITING ON/OFF

If you have Call Waiting with Caller ID

service, you can set the ET-1111 to

show Caller ID information for an incom-

ing call even while you are already on

the phone.

43-1111.fm Page 10 Tuesday, June 29, 1999 3:38 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack 43-3821 Bedienungsanleitung

Radio Shack

Radio Shack 43-3824 Bedienungsanleitung

Radio Shack

Radio Shack 43-5862 Bedienungsanleitung

Radio Shack

Radio Shack ET-596 Bedienungsanleitung

Radio Shack

Radio Shack 43-3857 Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack 43-3505 Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack 43-3887 Bedienungsanleitung

Radio Shack

Radio Shack ET-153 Bedienungsanleitung

Radio Shack

Radio Shack TAD-729 Bedienungsanleitung

Radio Shack

Radio Shack 43-3815/43-3898 Bedienungsanleitung

Radio Shack

Radio Shack ET-539 Bedienungsanleitung

Radio Shack

Radio Shack ET-929 Bedienungsanleitung

Radio Shack

Radio Shack 43-3537 Bedienungsanleitung

Radio Shack

Radio Shack ET-1110 Bedienungsanleitung

Radio Shack

Radio Shack 43-3549 Bedienungsanleitung

Radio Shack

Radio Shack 43-3576 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1017 Bedienungsanleitung

Radio Shack

Radio Shack ET-545 Bedienungsanleitung

Radio Shack

Radio Shack 43-5560 Bedienungsanleitung

Radio Shack

Radio Shack ET-553 Bedienungsanleitung

Radio Shack

Radio Shack ET-518 Bedienungsanleitung

Radio Shack

Radio Shack 43-3546 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung