Radio Shack ET-908 Bedienungsanleitung

Cat. No. 43-1083

OWNER’S MANUAL

Please read before using this equipment.

ET-908

900 MHz Digital Cordless Telephone

With 10-Number Speed Dialing

43-1083.fm Page 1 Tuesday, August 17, 1999 2:17 PM

FEATURES

Your Radio Shack ET-908 900 MHz

Digital Cordless Telephone With 10-

Number Speed-Dialing uses advanced

digital cordless telephone technology

to give you superior sound quality. It

uses the recently allocated 900 MHz

band which means less interference,

clearer sound, and greater range than

46/49 MHz cordless telephones. Its

cordless operation lets you make or

answer calls just about anywhere in

your home or office.

Your phone’s features include:

900 MHz Operation —provides better

sound and less interference than many

other cordless phones.

itall

Encoded Si

nal — prevents

other people from picking up your

phone’s signal and listening to your

conversations.

Securit

Access Protection Code —

changes each time you place the

handset on the base, to minimize the

chances of other cordless phones us-

ing your phone line.

10 Channels — scans 10 channels

(frequency pairs used between the

base and the handset) and automati-

cally selects the one with the least in-

terference each time you make or

receive a call, and lets you change the

channel during a call.

Out of Ran

e Si

nal — the handset

beeps to let you know when you move

out of the base’s operating range.

10-Number Speed Dialin

— lets you

store up to 10 phone numbers in mem-

ory for easy dialing.

stem — letsyou send a sig-

nal from the base to the handset so

you can page someone oreasily locate

the handset when it is away from the

base.

-Ke

Answer — lets you press

any key on the handset (exceptOFF) to

answer an incoming call.

ital Volume Control — lets you

adjust the volume of the sound you

hear through the handset.

Pro

rammable Rin

er — lets you se-

lect from four ringer types and turn the

handset’s ringer on or off.

Privac

— prevents the person on the

other end of the phone line from hear-

ing your conversation with someone in

the room.

Flash — sends an electronic switch-

hook signal for use with special phone

services such as call waiting.

Redial — lets you quickly dial the last

number dialed.

Radio Shack is a registered trademark used by Tandy Corporation.

43-1083.fm Page 2 Tuesday, August 17, 1999 2:17 PM

Touch Tone (DTMF) or Pulse Dialing

—lets you use your phone with either

type of dialing.

Hearing Aid Compatible — lets you

use this telephone with hearing aids

that have a T (telephone) switch.

This phone has been tested and found

to comply with all applicable UL and

FCC standards.

Important: Cordless phones such as

this one require AC power to operate.

When AC power is off, you cannot dial

out or receive incoming calls using

your ET-908. For this reason, the ET-

908 should not be your only telephone.

To be safe, you should also have a

phone that does not require AC power

to operate (not a cordless phone) so

you can still make and receive calls if

there is an AC power failure.

For your records, we recommend you

record the phone’s serial number in the

space below. The number is located

on the bottom of the base.

Serial Number:

Warning: To prevent fire or shock haz-

ard, do not expose this product to rain

or moisture.

This symbol is intended to alert you

to the presence of uninsulated dan-

gerous voltage within the product’s

enclosure that might be of sufficient

magnitude to constitute a risk of

electric shock. Do not open the

product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are in-

cluded in the literature accompany-

ing this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

CAUTION

43-1083.fm Page 3 Tuesday, August 17, 1999 2:17 PM

READ THIS BEFORE

INSTALLATION

Your telephone conforms to federal

regulations, and you can connect it to

most telephone lines. However, each

device you connect to the phone line

draws power from the phone line. We

refer to this power draw as the device’s

ringer equivalence number, or REN.

The REN is on the label on the base’s

back.

If you are using more than one phone

or other device on the line, add up all

the RENs. If the total is more than five,

your phone might not ring. In rural ar-

eas, a total REN of three might impair

ringer operation. If ringer operation is

impaired, remove a device from the

line.

FCC STATEMENT

This telephone complies with part 68 of

FCC Rules

. You must, upon request,

provide the FCC Registration Number

and the REN to your phone company.

These numbers are on the label on the

base’s back.

You must not connect your phone to

any of the following:

• Coin-operated systems

• Party-line systems

• Most electronic key phone sys-

tems

Note: Your telephone operates on

standard radio frequencies, as allocat-

ed by the FCC. Even though the ac-

cess protection code prevents

unauthorized use of your phone line, it

is possible for other radio units operat-

ing on similar frequencies within a cer-

tain area to unintentionally intercept

your conversations and/or cause inter-

ference. This lack of privacy can occur

with any cordless phone.

43-1083.fm Page 4 Tuesday, August 17, 1999 2:17 PM

CONTENTS

Installation ............................................................................................................ 6

Selecting a Location ........................................................................................ 6

Placing the Base on a Desktop ....................................................................... 6

Mounting the Base on a Wall .......................................................................... 7

Mounting on a Wall Plate .......................................................................... 7

Mounting Directly on the Wall ................................................................... 9

Preparation ......................................................................................................... 11

Installing the Battery Pack ............................................................................ 11

Charging the Battery Pack ............................................................................ 11

Setting the PULSE/TONE Switch .................................................................. 13

Adjusting the Ringer ...................................................................................... 13

Checking/Setting the Ringer Type .......................................................... 13

Turning On/Off the Ringer ...................................................................... 14

Operation ............................................................................................................ 15

Making/Answering Calls ................................................................................ 15

Using REDIAL ............................................................................................... 16

Using HOLD .................................................................................................. 16

Using PRIVACY ............................................................................................ 16

Using FLASH ................................................................................................ 17

Using Tone Services on a Pulse Line ........................................................... 17

Using PAGE .................................................................................................. 17

Changing Channels ...................................................................................... 18

Using Memory Dialing ................................................................................... 18

Storing a Number in Memory .................................................................. 18

Storing a Pause in Memory .................................................................... 19

Dialing a Stored Number ........................................................................ 20

Chain Dialing Service Numbers .............................................................. 20

Testing Stored Emergency Numbers ...................................................... 20

Troubleshootin

................................................................................................ 21

Out of Range Indications .............................................................................. 23

Out of Range with No Call ...................................................................... 23

Out of Range with a Call in Progress ..................................................... 23

Care and Maintenance ...................................................................................... 24

The FCC Wants You to Know ....................................................................... 25

Lightning ....................................................................................................... 25

43-1083.fm Page 5 Tuesday, August 17, 1999 2:17 PM

INSTALLATION

SELECTING A

LOCATION

You can set the ET-908’s base on a

flat surface (such as a desktop or

counter-top), mount it on a modular

jack wall plate, or mount it directly on

the wall. The base’s location affects

the phone’s range. If you have a

choice of several locations, try each to

see which one provides the best per-

formance.

Select a location that is:

• Near an AC outlet

• Near a telephone line jack

• Away from electrical machinery,

electrical appliances, and metal

walls or filing cabinets

• Away from wireless intercoms,

alarms, and room monitors

If the phone line jack is not a modular

jack, you must update the wiring. You

can convert the wiring yourself, using

jacksand adapters available at your lo-

cal Radio Shack store. Or, you can let

the phone company update the wiring

for you.

Notes:

• The phone company charges for

the installation of the necessary

jacks.

• The USOC number of the base-

board jack to be installed is

RJ11C.

• After you mount the phone, you

must install the battery pack and

charge it for 24 hours before you

use it the first time. See “Prepara-

tion” on Page 11.

PLACING THE BASE ON

A DESKTOP

1. Plug one end of the supplied 7-

foot modular cord into the TO TEL

LINE jack on the back of the ET-

908’s base.

2. Plug the modular cord’s other end

into a modular phone line jack.

3. Plug the ET-908’s AC cord into a

standard AC outlet. The POWER

indicator turns on.

4. For the best reception, adjust the

base’s antenna so it stands

straight up.

TO TEL. LINE

43-1083.fm Page 6 Tuesday, August 17, 1999 2:17 PM

MOUNTING THE BASE

ON A WALL

Using the supplied mounting bracket,

you can mount the ET-908’s base on a

phone jack wall plate or directly on the

wall.

To prepare the bracket for mounting,

twist off the tabs attached to the center

of the bracket and press them securely

into the holes on the narrow end of the

bracket.

Mounting on a Wall Plate

1. Press the ET-908’s AC cord under

the recessed clip directly below it

on the bottom of the phone.

2. Plug one end of the supplied short

modular cord into the TO TEL LINE

jack, then press the cord under

the other recessed clip on the bot-

tom of the phone.

3. Insert the tabs on the supplied

mounting bracket into the slots on

the bottom of the base. Then

press the bracket down until it

snaps into place.

TO TEL. LINE

43-1083.fm Page 7 Tuesday, August 17, 1999 2:17 PM

4. Press the AC cord into the top and

bottom grooves on the left side of

the bracket, press the modular

cord into the center groove on the

right side of the bracket, then plug

the modular cord into the modular

phone jack.

5. Line up the keyhole slots on the

bracket with the studs on the wall

plate, then slide the base down

onto the wall plate until it is

secure.

6. Press up on the handset holder to

remove it, turn it over so its tabbed

edge faces up, then press it back

down into its slot on the base.

7. Plug the ET-908’s AC cord into a

standard AC outlet. The POWER

indicator turns on.

8. For the best reception, adjust the

base’s antenna so it stands

straight up.

Note: If you want to remove the sup-

plied bracket after attaching it, simply

press in the tab on each side of the

bracket and lift the bracket away from

the base.

POWER

CORDLESS • SPEAKERPHONE ET-908

TONEPULSE

43-1083.fm Page 8 Tuesday, August 17, 1999 2:17 PM

Mounting Directly on the Wall

Using a drill (not supplied) and the sup-

plied screws and spacers, you can

easily mount your ET-908 directly on

the wall.

1. At the desired mounting location,

drill two holes 315/16 inches apart,

one above the other.

2. Place a spacer over each screw,

then thread a screw into each wall

hole until the screw’s head

extends about 1/4inch from the

wall.

3. Press the ET-908’s AC cord under

the recessed clip directly below it

on the bottom of the phone.

4. Plug one end of the supplied 7-

foot modular cord into the TO TEL

LINE jack, then press the cord

under the other recessed clip on

the bottom of the phone.

5. Insert the tabs on the supplied

mounting bracket into the slots on

the bottom of the base, then press

the bracket down until it snaps

into place.

315/16”

TO TEL. LINE

43-1083.fm Page 9 Tuesday, August 17, 1999 2:17 PM

6. Press the AC cord into the top and

bottom grooves on the left side of

the bracket, press the modular

cord into the top and bottom

grooves on the right side of the

bracket, then plug the modular

cord into a modular phone jack.

7. Line up the keyhole slots on the

bracket with the screws on the

wall, then slide the base down

onto the screws until it is secure.

8. Press up on the handset holder to

remove it, turn it over so its tabbed

edge faces up, then press it back

down into its slot on the base.

9. Plug the ET-908’s AC cord into a

standard AC outlet. The POWER

indicator turns on.

10. For the best reception, adjust the

base’s antenna so it stands

straight up.

Note: If you want to remove the sup-

plied bracket after attaching it, simply

press in the tab on each side of the

bracket and lift the bracket away from

the base.

POWER

CORDLESS • SPEAKERPHONE ET-908

TONEPULSE

43-1083.fm Page 10 Tuesday, August 17, 1999 2:17 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack ET-919 Bedienungsanleitung

Radio Shack

Radio Shack 43-1088 Bedienungsanleitung

Radio Shack

Radio Shack ET-685 Bedienungsanleitung

Radio Shack

Radio Shack 43-3871 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack 43-683 Bedienungsanleitung

Radio Shack

Radio Shack ET-551 Bedienungsanleitung

Radio Shack

Radio Shack 43-327 Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital... Bedienungsanleitung

Radio Shack

Radio Shack ET-542 Bedienungsanleitung

Radio Shack

Radio Shack ET-598 Bedienungsanleitung

Radio Shack

Radio Shack 43-3814 Bedienungsanleitung

Radio Shack

Radio Shack 43-3548 Bedienungsanleitung

Radio Shack

Radio Shack Cordless Telephone Bedienungsanleitung

Radio Shack

Radio Shack 43-3585 Bedienungsanleitung

Radio Shack

Radio Shack 43-164 Bedienungsanleitung

Radio Shack

Radio Shack 43-3571 Bedienungsanleitung

Radio Shack

Radio Shack ET-1110 Bedienungsanleitung

Radio Shack

Radio Shack 43-3578 Bedienungsanleitung

Radio Shack

Radio Shack 43-3823 Bedienungsanleitung

Radio Shack

Radio Shack TAD-728 Bedienungsanleitung

Radio Shack

Radio Shack ET-1112 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung