Radio Shack ET-689 Bedienungsanleitung

Cat. No. 43-689

OWNER’S MANUAL

Please read before using this equipment.

ET-689

900 MHz Two-Line

Cordless Telephone

43-689.fm Page 1 Thursday, September 16, 1999 10:22 AM

FEATURES

Your RadioShack ET-689 900 MHz

Two-Line Cordless Telephone uses the

900 MHz band, which means clear

sound with less interference and greater

range than 46/49 MHz cordless tele-

phones. Its cordless operation lets you

make or answer calls just about any-

where in your home or office.

Its optional headset jack lets you con-

nect a headset to the handset for hands-

free conversation — perfect for when

you are working in the yard or garage.

Its other features include:

20-Number Memory Dialing — lets

you store up to 20 numbers in memory

for easy dialing.

3-Way Conference — lets you make

calls on two separate telephone lines

and join them for a 3-way conference

call.

Page — sends a signal from the base to

the handset so you can locate the hand-

set if you have misplaced it.

Handset Volume Control — lets you

adjust the volume when you are away

from the base.

Two-Line Distinctive Ringer — pro-

duces a different ringer sound for each

line so you can tell which line is ringing

without looking at the line indicators.

Note: To use both of the ET-689’s lines,

you must connect it to two separate tele-

phone lines. Each of these lines must

have its own phone number. If you do

not have two telephone lines, contact

your phone company to get a second

line.

20 Channel Autoscan — automatically

selects a clear channel when you make

or answer a call. You can also manually

change channels during a call.

Security Access-Protection Code —

helps prevent other cordless phone us-

ers from using your phone line while the

handset is off the base.

Hearing-Aid Compatibility — lets you

use your phone with hearing aids that

have a T (telephone) switch.

Ample Talk and Standby Time — the

supplied battery pack provides 4 hours

of continuous talk time or 7 days of

standby time (when fully charged).

Desk/Wall Mountable — lets you place

the phone on a desk, or mount it on a

wall plate or directly on a wall.

Super CCT Noise-Reduction Circuitry

— gives you sound clarity comparable to

corded telephones.

Quick Talk — Lets you quickly answer

a call without pressing any button by

simply lifting the handset from the base.

COM-LOK and RadioShack are registered trademarks used by Tandy Corporation.

43-689.fm Page 2 Thursday, September 16, 1999 10:22 AM

Note: Your telephone operates on stan-

dard radio frequencies as allocated by

the FCC. Even though the access pro-

tection code prevents unauthorized use

of your phone line, it is possible for other

radio units operating on similar frequen-

cies within a certain area to unintention-

ally intercept your conversations and/or

cause interference. This lack of privacy

can occur with any cordless phone.

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

For your records, we recommend you

record your phone’s serial number here.

The number is on the bottom of the

base.

Serial Number:

Important:

• Cordless phones such as this one

require AC power to operate. When

AC power is off, you cannot dial out

or receive incoming calls using your

ET-689. For this reason, the ET-689

should not be your only telephone.

To be safe, you should also have a

phone that does not require AC

power to operate (not a cordless

phone), so you can still make and

receive calls if there is an AC power

failure.

• Some cordless phones operate at

frequencies that might cause inter-

ference to nearby TVs and VCRs. To

minimize or prevent such interfer-

ence, the base of the cordless

phone should not be placed near or

on top of a TV or VCR.

This symbol is intended to alert you to

the presence of uninsulated danger-

ous voltage within the product’s enclo-

sure that might be of sufficient

magnitude to constitute a risk of elec-

tric shock. Do not open the product’s

case.

This symbol is intended to inform you

that important operating and mainte-

nance instructions are included in the

literature accompanying this product.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

WARNING: To reduce the risk of

fire or shock hazard, do not ex-

pose this product to rain or mois-

ture.

43-689.fm Page 3 Thursday, September 16, 1999 10:22 AM

READ THIS BEFORE

INSTALLATION

Each device that you connect to the

phone line draws power from the phone

line. We refer to this power draw as the

device’s

ringer equivalence number

, or

REN

. The REN is on the bottom of the

base.

If you are using more than one phone or

other device on the line, add up all the

RENs. If the total is more than five, your

phones might not ring. In rural areas, a

total REN of three might impair ringer

operation. If ringer operation is impaired,

remove a device from the line.

FCC STATEMENT

This telephone complies with Part 68 of

FCC Rules

. Upon request, you must

provide the FCC Registration Number

and the REN to your phone company.

These numbers are on the bottom of the

base.

Note: You must not connect your phone

to any of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

43-689.fm Page 4 Thursday, September 16, 1999 10:22 AM

CONTENTS

Installation ............................................................................................................... 6

Installing the Handset’s Antenna ........................................................................ 6

Selecting a Location ........................................................................................... 6

Mounting the Phone ........................................................................................... 7

On a Desk Top ............................................................................................. 7

On a Wall Plate ............................................................................................ 8

Directly on a Wall ......................................................................................... 9

Connecting and Charging the Battery Pack ..................................................... 10

Setting the Dialing Mode .................................................................................. 12

Turning the Ringer On/Off ................................................................................ 12

Operation ............................................................................................................... 13

Making/Answering Calls ................................................................................... 13

Changing the Channel ...................................................................................... 13

Adjusting the Handset’s Volume ....................................................................... 14

Using Redial ..................................................................................................... 14

Using Flash ...................................................................................................... 14

Putting a Call on Hold ....................................................................................... 15

Conference Calling ........................................................................................... 15

Using Tone Services on a Pulse Line ............................................................... 16

Paging .............................................................................................................. 16

Memory Dialing ................................................................................................ 16

Storing a Number in Memory ..................................................................... 16

Entering a Pause ....................................................................................... 17

Dialing a Memory Number ......................................................................... 17

Chain-Dialing Service Numbers ................................................................. 17

Testing Stored Emergency Numbers ......................................................... 17

Using a Headset ............................................................................................... 18

Troubleshooting .................................................................................................... 19

Care and Maintenance .......................................................................................... 21

Replacing the Battery Pack .............................................................................. 22

The FCC Wants You to Know ........................................................................... 23

Lightning ........................................................................................................... 23

43-689.fm Page 5 Thursday, September 16, 1999 10:22 AM

INSTALLATION

INSTALLING THE

HANDSET’S

ANTENNA

Insert the antenna into the

larger hole at the top of

the handset, then screw in

the antenna clockwise un-

til it is secure.

SELECTING A LOCATION

You can place the phone on a desk or

table, mount it on a standard wall plate,

or mount it directly on a wall. Select a lo-

cation that is:

• near an easily accessible AC outlet

• near a modular telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of sev-

eral locations, try each to see which

provides the best performance.

Caution: You must use a Class

2 power source that supplies

12 volts DC and delivers at

least 300 mA. Its center tip must be set

to positive and its plug must fit the

base's

DC 12V jack. The supplied adapt-

er meets these specifications. Using an

adapter that does not meet these speci-

fications could damage the base or the

adapter. You can connect your ET-689

to a 2-line modular telephone jack using

one of the supplied 2-line modular

cords. Or, you can connect your tele-

phone to two separate 1-line modular

telephone jacks using the supplied 2-

line modular cords.

Notes:

• Your telephone connects directly to

a modular telephone line jack. If

your phone line jack is not a modular

jack, you can update the wiring

yourself, using jacks and adapters

available at your local RadioShack

store. Or, you can let the phone

company update the wiring for you.

• The USOC number of the two-line

jack to be installed is RJ14C (or

RJ14W for a wall plate jack). The

USOC number for a single-line jack

is RJ11C (or RJ11W for a wall plate

jack).

43-689.fm Page 6 Thursday, September 16, 1999 10:22 AM

MOUNTING THE PHONE

On a Desk Top

1. Remove the base’s bracket by

pressing both tabs on the wide end,

then lifting off the bracket.

If you have a single 2-line modular

jack,

plug one end of the supplied 2-

line long modular cord into L1 OR L1/

L2 on the back of the phone’s base.

Note: When you make this connec-

tion, do not connect another modu-

lar cord to the L2 jack. Otherwise,

the phone will not operate properly.

If you have two separate 1-line mod-

ular jacks,

plug one end of the sup-

plied 2-line long modular cord into

L1 OR L1/L2 and plug the other sup-

plied 2-line long modular cord into

L2.

If you have a single 1-line modular

jack,

plug one end of either supplied

long modular cord into L1 OR L1/L2

to use line 1, or into L2 to use line 2.

3. Plug the supplied AC adapter’s bar-

rel plug into the DC 12V jack on the

back of the phone’s base.

4. Route the adapter’s cord through

the right groove on the bottom of the

base.

43-689.fm Page 7 Thursday, September 16, 1999 10:22 AM

5. Insert the tabs on the narrow end of

the bracket into the lower slots on

the base’s bottom, then push the

tabs on the wide end of the bracket

into the other slots until the bracket

clicks securely into place.

6. Plug the AC adapter into a standard

AC outlet.

7. Plug the other end(s) of the modular

cord(s) into the modular telephone

jack(s).

8. Lift the base’s antenna to a vertical

position.

On a Wall Plate

1. Remove the base’s bracket by

pressing both tabs on the wide end,

then lifting off the bracket.

If the wall plate has a single 2-line or

1-line modular jack,

plug one end of

the supplied 2-line short modular

cord into L1 OR L1/L2 on the back of

the phone’s base.

Note: When you make this connec-

tion, do not connect another modu-

lar cord to the L2 jack. Otherwise,

the phone will not operate properly.

If the wall plate has a single 1-line

modular jack, and there is another

modular telephone jack close by,

plug one end of the supplied 2-line

short modular cord into L1 OR L1/L2,

and plug the supplied 2-line long

modular cord into L2.

3. Plug the supplied AC adapter’s bar-

rel plug into the DC 12V jack on the

back of the phone’s base.

4. Route the AC adapter’s cord

through the right groove on the bot-

tom of the base. Route the short

modular cord through the left groove

on the bottom of the base.

43-689.fm Page 8 Thursday, September 16, 1999 10:22 AM

If you need to connect a long modu-

lar cord to the L2 jack, remove the

short modular cord from the left

groove and route the long modular

cord through the groove on the bot-

tom of the base.

5. Route the end of the short modular

cord through the hole in the center

of the bracket, then insert the tabs

on the narrow end of the bracket into

the upper slots on the base’s bot-

tom.

6. Route the adapter cord and the long

modular cord (if you have connected

it) through each slot on the bottom

of the wide end of the bracket, then

push the tabs on the wide end of the

bracket into the other slots until the

bracket clicks securely into place.

7. Plug the AC adapter into a standard

AC outlet.

8. Plug the short modular cord into the

wall plate jack, then align the base’s

keyhole slots with the wall plate

studs and slide the base downward

to secure it.

If you attached a long modular cord,

plug it into the other phone line jack.

9. Lift the base’s antenna to a vertical

position.

Directly on a Wall

For this mounting method, you need two

screws (not supplied) with heads that fit

into the keyhole slots on the mounting

bracket.

1. At the desired mounting

location, drill two holes

315/16 inches (100 mm)

apart vertically. Then

thread a screw into each

hole, letting the heads

extend about 3/16 inch (5

mm) from the wall.

2. Remove the bracket by holding in

both tabs on the wide end, then gen-

tly pulling out the wide end of the

bracket.

/16

315/16

43-689.fm Page 9 Thursday, September 16, 1999 10:22 AM

If you have a single 2-line modular

jack,

plug one end of the supplied

long 2-line modular cord into L1 OR

L1/L2 on the back of the phone’s

base.

Note:

When you make this connec-

tion, do not connect another modu-

lar cord to the L2 jack. Otherwise,

the phone will not operate properly.

If you have two separate 1-line mod-

ular jacks,

plug one end of the sup-

plied 2-line long modular cord into

L1 OR L1/L2 and plug the supplied 2-

line long modular cord into L2.

If you have a single 1-line modular

jack,

plug one end of either supplied

long modular cord into L1 OR L1/L2

to use line 1, or into L2 to use line 2.

4. Plug the supplied AC adapter’s bar-

rel plug into the DC 12V jack.

5. Route the adapter’s cord through

the right groove on the bottom of the

base. Route the long modular cord

through the left groove on the bot-

tom of the base.

If you have connected two long

modular cords, route the cord con-

nected to L1 OR L1/L2 through the

right groove on the bottom of the

base, and route the cord connected

to L2 through the hole in the center

of the bracket.

6. Insert the tabs on the narrow end of

the bracket into the slots on the

base’s bottom as shown, then push

the tabs on the wide end of the

bracket until it clicks securely into

place.

7. Plug the AC adapter into a standard

AC outlet.

8. Plug the other end(s) of the cord(s)

into a modular phone line jack(s).

9. Align the base’s keyhole slots with

the mounting screws and slide the

base downward to secure it.

10. Lift the base’s antenna to a vertical

position.

CONNECTING AND

CHARGING THE BATTERY

PACK

The ET-689 comes with a rechargeable

nickel-cadmium battery pack in the

handset but not connected. Before using

your phone, you must connect the bat-

tery pack, then charge it for about 15

hours.

1. Press down and slide off the battery

compartment cover.

43-689.fm Page 10 Thursday, September 16, 1999 10:22 AM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack 43-3814 Bedienungsanleitung

Radio Shack

Radio Shack ET-926 Bedienungsanleitung

Radio Shack

Radio Shack ET-531 Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack 4301122D Bedienungsanleitung

Radio Shack

Radio Shack ET-1110 Bedienungsanleitung

Radio Shack

Radio Shack ET-532 Bedienungsanleitung

Radio Shack

Radio Shack ET-545 Bedienungsanleitung

Radio Shack

Radio Shack 43-3576 Bedienungsanleitung

Radio Shack

Radio Shack ET-685 Bedienungsanleitung

Radio Shack

Radio Shack TAD 1130 Bedienungsanleitung

Radio Shack

Radio Shack Wireless Phone Jack System Bedienungsanleitung

Radio Shack

Radio Shack 43-3502 Bedienungsanleitung

Radio Shack

Radio Shack TAD-727 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless... Bedienungsanleitung

Radio Shack

Radio Shack ET-1124 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1010 Bedienungsanleitung

Radio Shack

Radio Shack 43-3880 Bedienungsanleitung

Radio Shack

Radio Shack ET-925 Bedienungsanleitung

Radio Shack

Radio Shack ET-1112 Bedienungsanleitung

Radio Shack

Radio Shack 43-329 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum... Bedienungsanleitung

Radio Shack

Radio Shack Presidian Bedienungsanleitung

Radio Shack

Radio Shack 43-3548 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung