Radio Shack ET-929 Bedienungsanleitung

Cat. No. 43-1099

OWNER’S MANUAL

Please read before usin

this equipment.

ET-929

900 MHz Cordless Telephone

with Caller ID/Call Waiting ID

43-1099.fm Page 1 Tuesday, August 17, 1999 4:19 PM

FEATURES

Your RadioShack ET-929 900 MHz

Cordless Telephone uses advanced

technology to give you superior audio

quality and extended range, while its

cordless operation lets you move freely

around your home or office.

The ET-929’s Caller ID unit records

each caller’s telephone number (and

name, if available in your area) and the

date and time of the call, as provided by

your local phone company to Caller ID

service subscribers. And, if you sub-

scribe to Call Waiting with Caller ID, the

ET-929 can show you the incoming call-

er information, even when you are al-

ready on the phone.

Your ET-929 has these features:

900 MHz Operation — Provides longer

range and less interference than many

other cordless phones.

Headset Jack — lets you connect an

optional headset (available from your lo-

cal RadioShack store) for hands-free

convenience.

20-Number Memor

Dialin

— lets

you store up to 20 phone numbers in

memory for easy dialing.

e— lets you send a signal from the

base to the handset to page someone or

to help you locate the handset if you

have misplaced it.

Volume Control — so you can adjust

the volume you hear through the hand-

set.

Pro

rammable Rin

er — choose from

four tone/volume settings for the hand-

set’s ringer.

3-Line Liquid Cr

stal Displa

— lets

you see who is trying to reach you be-

fore you answer the phone.

Facedown or Faceup Handset Char

— you can place the handset on the

base facedown or faceup (to show the

Caller ID display, for example).

Wall Mountable — you can mount the

ET-929 on a wall to save space on your

desk top.

Ample Talk and Standb

Time — the

supplied battery (when fully charged)

provides about 7 hours of talk time or 7

days of standby time.

Caller ID Memor

— stores up to 30

Caller ID records.

COM-LOK®— ensures that other cord-

less phone users cannot use your phone

line when the handset is on the base.

Securit

Access-Protection Code —

automatically prevents other cordless

phone users from using your phone line

while the handset is off the base.

COM-LOK and RadioShack are registered trademarks used by Tandy Corporation.

43-1099.fm Page 2 Tuesday, August 17, 1999 4:19 PM

Autotalk — you can set the ET-929 so

you can answer a call simply by lifting

the handset from the base.

Tone or Pulse Dialing — lets you use

your phone with tone or pulse (rotary) di-

aling and lets you switch from pulse to

tone dialing for long-distance, bank-by-

phone, or other special services.

Super CCT Noise-Reduction Circuitry

— provides clear telephone conversa-

tions with sound clarity comparable to

that of a corded phone.

Redial — lets you quickly redial the last

number dialed.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as Call Waiting.

Hearing-Aid Compatibility — lets you

use the ET-929 with hearing aids that

have a T (telephone) switch.

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

We recommend you record your

phone’s serial number here. The num-

ber is on the bottom of the base.

Serial Number: __________________

Important Caller ID Information

To use the phone’s Caller ID and Call

Waiting with Caller ID features, you

must be in an area where those services

are available and you must subscribe to

those services through your local phone

company.

Where Caller ID is offered, one or more

options are generally available:

• caller’s number only

• caller’s name only

• caller’s name and number

This symbol is intended to alert you to

the presence of uninsulated danger-

ous voltage within the product’s enclo-

sure that might be of sufficient

magnitude to constitute a risk of elec-

tric shock. Do not open the product’s

case.

This symbol is intended to inform you

that important operating and mainte-

nance instructions are included in the

literature accompanying this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

Warning: To prevent fire or shock

hazard, do not expose this product

to rain or moisture.

CAUTION

43-1099.fm Page 3 Tuesday, August 17, 1999 4:19 PM

Important:

• Cordless phones such as this one

require AC power to operate. When

the power is off, you cannot make or

receive calls using your ET-929. To

be safe, you should also have a

phone that does not need AC power

to operate (not a cordless phone),

so you can still make and receive

calls if there is an AC power failure.

• Your phone operates on standard

radio frequencies as allocated by

the FCC. It is possible for other ra-

dio units operating nearby on similar

frequencies to unintentionally inter-

cept your conversation or cause in-

terference. This possible lack of

privacy can occur with any cordless

phone.

READ THIS BEFORE

INSTALLATION

Your ET-929 conforms to federal regula-

tions, and you can connect it to most

telephone lines. However, each device

that you connect to the telephone line

draws power from the line. We refer to

this power draw as the device’s

ringer

equivalence number

, or REN. The REN

is on the bottom of the base.

If you are using more than one phone or

other device on the line, add up all the

RENs. If the total is more than five, your

phones might not ring. In rural areas, a

total REN of three might impair ringer

operation. If ringer operation is impaired,

remove a device from the line.

FCC STATEMENT

Your ET-929 complies with Part 68 of

FCC Rules

. You must, upon request,

provide the FCC registration number

and the REN to your phone company.

These numbers are on the bottom of the

base.

Note: You must not connect your phone

to any of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

The ET-929 complies with the limits for

a Class B digital device as specified in

Part 15 of

FCC Rules

. These limits pro-

vide reasonable protection against ra-

dio and TV interference in a residential

area. However, your equipment might

cause TV or radio interference even

when it is operating properly. To elimi-

nate interference, you can try one or

more of the following corrective mea-

sures:

• Reorient or relocate the receiving

antenna.

• Increase the distance between the

equipment and the radio or TV.

• Use outlets on different electrical cir-

cuits for the equipment and the ra-

dio or TV.

Consult your local RadioShack store if

the problem still exists.

43-1099.fm Page 4 Tuesday, August 17, 1999 4:19 PM

CONTENTS

Installation ............................................................................................................ 6

Mounting the Phone ........................................................................................ 6

On a Desk ................................................................................................. 6

On a Wall Plate ......................................................................................... 7

Directly On a Wall ..................................................................................... 8

Connecting and Charging the Battery Pack .................................................... 9

Setting the Dialing Mode ............................................................................... 11

Setting the Ringer’s Tone and Volume .......................................................... 12

Turning Autotalk On/Off ................................................................................. 12

Storing Your Area Code ................................................................................ 13

Setting Caller ID with Call Waiting ................................................................. 13

Operation ............................................................................................................ 14

Making Calls .................................................................................................. 14

Answering Calls ............................................................................................. 14

Setting the Handset Volume .......................................................................... 14

Changing the Channel ................................................................................... 14

Using REDIAL ............................................................................................... 15

Using FLASH ................................................................................................. 15

Using Tone Services on a Pulse Line ............................................................ 15

Paging ........................................................................................................... 16

Memory Dialing ............................................................................................. 16

Storing a Number and Name in Memory ................................................ 16

Editing or Deleting a Memory Number .................................................... 18

Entering a Pause .................................................................................... 18

Dialing a Memory Number ...................................................................... 18

Chain-Dialing Service Numbers .............................................................. 19

Testing Stored Emergency Numbers ...................................................... 19

Using a Headset ............................................................................................ 19

Caller ID Operation ............................................................................................ 20

Reviewing Caller ID Records ........................................................................ 20

Caller ID Messages ................................................................................ 21

Dialing from a Caller ID Record ..................................................................... 21

Storing a Caller ID Record to Memory .......................................................... 22

Deleting Caller ID Records ............................................................................ 22

Troubleshootin

................................................................................................. 23

Care and Maintenance ....................................................................................... 25

Replacing the Battery Pack ........................................................................... 26

The FCC Wants You to Know ........................................................................ 27

Lightning ........................................................................................................ 27

43-1099.fm Page 5 Tuesday, August 17, 1999 4:19 PM

INSTALLATION

MOUNTING THE PHONE

You can place the phone on a desk or

table, mount it on a standard wall plate,

or mount it directly on a wall.

Select a location that is:

• near an AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of sev-

eral locations, try each to see which

provides the best performance.

Caution: The supplied AC adapter was

designed specifically for your ET-929.

Use only the supplied adapter.

Notes:

• Your telephone connects directly to

a modular phone line jack. If your

phone line jack is not a modular

jack, you can update the wiring

yourself, using jacks and adapters

available from your local Ra-

dioShack store. Or, you can let the

telephone company update the wir-

ing for you.

• The USOC number of the jack to be

installed is RJ11C, or RJ11W for a

wall plate jack.

On a Desk

Follow these steps when you place the

base on a desk or table.

1. Insert the bracket’s tabs into the

base’s upper tab slots as shown,

then press down on the bracket’s

clips and insert them into the clip

slots.

2. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base.

3. Plug the modular cord’s other end

into a modular phone line jack.

Upper Tab Slots

Clips

Clip Slots

43-1099.fm Page 6 Tuesday, August 17, 1999 4:19 PM

4. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

5. Route the adapter’s cord through

the strain relief slot on the bracket.

6. Plug the adapter into a standard AC

outlet.

7. Lift the base’s antenna to a vertical

position.

On a Wall Plate

1. Insert the bracket’s tabs into the

base’s lower tab slots as shown,

then press down on the bracket’s

clips and insert them into the clip

slots.

2. Plug one end of the supplied short

modular cord into the TEL LINE jack

on the back of the base.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

4. Route the adapter’s cord through

the narrow groove on the bottom of

the bracket.

Strain

Relief Slot

Lower

Clip Slots

Tabs Slots

Tab

Narrow

Groove

43-1099.fm Page 7 Tuesday, August 17, 1999 4:19 PM

5. Plug the modular cord into the wall

plate jack, then align the bracket’s

keyhole slots with the wall plate

studs and slide the base downward

to secure it.

6. Plug the adapter into a standard AC

outlet.

7. Press and lift out the handset hold-

er, rotate it 180×, then snap it back

into place.

8. Lift the base’s antenna to a vertical

position.

Directly On a Wall

For this mounting method, you need two

screws (not supplied) with heads that fit

into the keyhole slots on the bottom of

the base.

1. Drill two holes 315/16

inches (100 mm)

apart. Then thread a

screw into each hole,

letting the heads ex-

tend about 5/16 inch (8

mm) from the wall.

2. Insert the bracket’s tabs into the

base’s lower tab slots as shown,

then press down on the bracket’s

clips and insert them into the clip

slots.

3. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base.

Lower

Clip Slots

Tabs Slots

Tab

43-1099.fm Page 8 Tuesday, August 17, 1999 4:19 PM

4. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

5. Route the modular and adapter

cords through the grooves on the

bottom of the bracket.

6. Align the keyhole slots with the

mounting screws and slide the base

downward to secure it.

7. Plug the modular cord into a modu-

lar phone line jack.

8. Plug the adapter into a standard AC

outlet.

9. Press and lift out the handset hold-

er, rotate it 180×, then snap it back

into place.

10. Lift the base’s antenna to a vertical

position.

CONNECTING AND

CHARGINGTHEBATTERY

PACK

The ET-929 comes with a rechargeable

nickel-cadmium battery pack in the

handset, but not connected. Before us-

ing your phone, you must connect the

battery pack, then charge it for about 14

hours.

Grooves

43-1099.fm Page 9 Tuesday, August 17, 1999 4:19 PM

1. Press down and slide off the battery

pack compartment cover as shown.

2. Unfasten the retainer strap and lift

the battery pack out of the compart-

ment.

3. Plug the battery pack’s connector in-

to the socket in the compartment

(the connector fits only one way),

then replace the battery pack and

fasten the retainer strap.

4. Replace the cover.

To charge the battery pack, place the

handset either faceup or facedown on

the base. The CHARGE indicator on the

base lights.

Recharge the battery pack when RE-

CHARGE NOW and flash on the dis-

play.

Notes:

• When you first use the phone after

charging or recharging the battery

pack, the phone might not work and

you might hear an error tone (5

short beeps) when you press TALK.

If this happens, return the handset

to the base for about 5 seconds.

This resets the security access-

protection code.

• If the CHARGE indicator does not

light when you place the handset on

the base, be sure the battery pack

and AC adapter are correctly and

securely connected.

Also, check the charging contacts

on the handset and base. If the con-

tacts are dirty or tarnished, clean

them with a pencil eraser.

• If the battery pack becomes com-

pletely discharged or the base loses

power while the handset is away,

the security access-protection code

needs to be reset. To reset the code,

return the handset to the base for

about 5 seconds. If it was the hand-

set that lost power, leave the hand-

set on the base to recharge the

battery pack

CHARGE

Indicator

43-1099.fm Page 10 Tuesday, August 17, 1999 4:19 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack ET-908 Bedienungsanleitung

Radio Shack

Radio Shack 43-325 Bedienungsanleitung

Radio Shack

Radio Shack ET-1118 Bedienungsanleitung

Radio Shack

Radio Shack 43-3814 Bedienungsanleitung

Radio Shack

Radio Shack 43-5829 Bedienungsanleitung

Radio Shack

Radio Shack ET-543 Bedienungsanleitung

Radio Shack

Radio Shack ET-1126 Bedienungsanleitung

Radio Shack

Radio Shack TAD-727 Bedienungsanleitung

Radio Shack

Radio Shack 43-3577 Bedienungsanleitung

Radio Shack

Radio Shack 43-3514 Bedienungsanleitung

Radio Shack

Radio Shack 43-3580 Bedienungsanleitung

Radio Shack

Radio Shack ET-1119 Bedienungsanleitung

Radio Shack

Radio Shack 43-3526 Bedienungsanleitung

Radio Shack

Radio Shack Wireless Phone Jack System Bedienungsanleitung

Radio Shack

Radio Shack ET-926 Bedienungsanleitung

Radio Shack

Radio Shack 43-3815 Bedienungsanleitung

Radio Shack

Radio Shack ET-531 Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack 43-683 Bedienungsanleitung

Radio Shack

Radio Shack ET-1124 Bedienungsanleitung

Radio Shack

Radio Shack 43-3570 Bedienungsanleitung

Radio Shack

Radio Shack ET-553 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum... Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung