Radio Shack 43-3821 Bedienungsanleitung

RadioShack and RadioShack.com are trademarks used by

RadioShack Corporation.

OWNER’S MANUAL

406)*\"%QTFNGUU"2JQPG

YKVJ"6#&

43-3821

Toll-Saver — lets you avoid unnecessary charges when

you call by long distance to check your messages. See

“Using the Toll-Saver” on Page 24.

Long Battery Life — the supplied battery pack (when fully

charged) provides about 7 hours of talk time or 14 days of

standby time. See “Connecting, Charging and Replacing the

Battery Pack” on Page 10.

20 Channels — automatically selects a clear channel when

you make or answer a call. You can also manually change

channels during a call. See “Selecting the Channel” on

Page 13.

Headset Jack — connects an optional headset (available

at your local RadioShack store) for hands-free

convenience. See “Using a Headset” on Page 14.

10 Number Memory Dialing — stores 10 numbers in memory

for easy dialing. See “Memory Dialing” on Page 15.

Thank you for purchasing a RadioShack 2.4 GHz Cordless Telephone. Your

telephone uses the 2.4 GHz band for less interference. Its headset jack lets you

connect an optional handset for handsfree convenience.

The digital answering system provides clear reliable messaging with call screening,

day/time stamp, call counter, remote access and instant skip or replay messaging.

43-3821.fm Page 1 Friday, May 10, 2002 10:08 AM

The FCC Wants You to Know

6*'"(%%"9#065";17"61"

-019

In the unlikely event that your phone causes

problems on the phone line, the phone company

can temporarily discontinue your service. If this

happens, thephone company attempts to notifyyou

in advance. If advance notice is not practical, the

phone company notifies you as soon as possible

and advises you of your right to file a complaint with

the FCC.

Also, the phone company can make changes to its

lines, equipment, operations, or procedures that

could affect the operation of this telephone. The

telephone company notifies you of these changes in

advance, so you can take the necessary Steps to

prevent interruption of your telephone service.

Your phone might cause TV or radio interference

even when it is operating properly. To determine

whether your phone is causing the interference,

turn off your phone. If the interference goes away,

your phone is causing it. Try to eliminate the

interference by:

• moving your phone away from the receiver

• connecting your phone to an AC outlet that is

on a different electrical circuit from the receiver

• contacting your local RadioShack store for help

If you cannot eliminate the interference, the FCC

requires that you stop using your phone. ±ý

.+)*60+0)

Your telephone has built-in protection circuits to

reduce the risk of damage from surges in telephone

line and power line current. These protection

circuits meet or exceed the FCC requirements.

However, lightning striking the telephone or power

lines can damage your telephone.

As an ENERGYSTAR Partner,

RadioShackCorporationhas

determined that this product

meets the ENERGYSTAR

guidelines for energy

efficiency.

±"016'"±"

Some cordless telephones

operate on frequencies that

might cause interference to

nearby TVs and VCRs. To

minimize or prevent such

interference, the base of

the cordless telephone

should not be placed near

or on top of a TV or VCR.

The FCC Wants You to Know

The lightning symbol is intended to alert you to

the presence of uninsulated dangerous voltage

within this product’s enclosure that might be of

sufficient magnitude to constitute a risk of

electric shock. Do not open the product’s case.

The exclamation symbol is intended to inform

you that important operating and maintenance

instructions are included in the literature

accompanying this product.

WARNING: To reduce the risk of fire or shock

hazard, do not expose this product to rain or

moisture. ..CAUTION..

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER OR BACK. NO

USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

43-3821.fm Page 2 Friday, May 10, 2002 10:08 AM

Important Safety Instructions

Lightning damage is not common. Nevertheless, if

you live in an area that has severe electrical storms,

we suggest that you unplug your phone when

storms approach to reduce the possibility of

damage.

+/2146#06"5#('6;"

+05647%6+105

Careful attention is devoted to quality standards in

the manufacture of your telephone equipment, and

safety is a major factor in its design. However,

safety is also your responsibility.

When using your telephone equipment, always

follow basic safety precautions to reduce the risk of

fire, electric shock, and injury to persons.

Read all

the included safety and operating instructions

before using your equipment.

Follow them

closely, and retain them for future reference.

Heed Warnings — Follow all warnings on the

product and in the operating instructions.

Cleaning — Unplug this product from the wall

outlet before cleaning. Use only a damp cloth for

cleaning. Do not use liquid or aerosol cleaners.

Water and Moisture — Do not use this product

near water (for example, near a bathtub, washbowl,

kitchen sink, or laundry tub; in a wet basement; or

near a swimming pool).

Mounting Accessories — Do not place this

product on an unstable cart, stand, tripod, bracket,

or table. The product may fall, causing serious

injury to a child or adult, and serious damage to the

product. Use only with a cart, stand, tripod, bracket,

or table recommended by the manufacturer or sold

with the product. Follow the manufacturer's

instructions for mounting, and use a recommended

mounting accessory.

%106'065

The FCC Wants You

to Know ............................ 2

Lightning ....................... 2

Important

Safety Instructions ........... 3

Battery

Safety Instructions ........... 6

Read This Before

Installation .................... 6

Installation ....................... 7

Mounting the Phone ..... 7

Connecting, Charging and

Replacing the

Battery Pack ............... 10

Setting the

Dialing Mode .............. 11

Setting the Handset’s

Ringer Tone ................ 12

Turning the Base’s Ringer

On/Off ......................... 12

Telephone Operation ..... 13

Making and

Receiving Calls ........... 13

Selecting the Channel 13

Adjusting the

Handset Volume ......... 13

Using FLASH .............. 13

Using Redial ............... 14

Using Tone Services on a

Pulse Line ................... 14

Paging ........................ 14

Using a Headset ......... 14

Memory Dialing .......... 15

Answering System

Operation ....................... 16

Using the

Menu Button ............... 16

Setting the Day/Time .. 17

Setting the

Number of Rings ........ 17

Setting the

Record Time ............... 18

(Continued)

43-3821.fm Page 3 Friday, May 10, 2002 10:08 AM

Important Safety Instructions

Ventilation — Slots and openings in the cabinet

provide ventilation, ensure reliable operation, and

protect from overheating. Do not block or cover

these openings, and do not place the product on a

bed, sofa, rug, or other similar surface. Do not place

the product in a built-in installation such as a

bookcase or rack unless it provides proper

ventilation as specified by the manufacturer.

Heat — The product should be situated away from

heat sources such as radiators, heat registers,

stoves, or other products (including amplifiers) that

produce heat.

Power Sources — Operate this product using only

the power source indicated on its marking label. If

you are not sure of your home's power type, consult

your product dealer or local power company.

Polarization — This product is equipped with a

polarized AC line plug (a plug having one blade

wider than the other). This plug will fit in the power

outlet only one way. This is a safety feature. If you

cannot insert the plug fully into the outlet, try

reversing the plug. If the plug still doesn't fit, contact

your electrician to replace your obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

If you need an extension, use a polarized cord.

Power-Cord Protection — Route power-supply

cords so they are not likely to be walked on or

pinched by items placed on or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

product.

Overloading — Do not overload wall outlets,

extension cords, or integral convenience

receptacles, as this can result in a risk of fire or

electric shock.

Objects and Liquids — Never push objects of any

kind into this product through openings, as they

%106'065

(Continued)

Setting the

Message Alert Tone .... 18

Selecting the

Outgoing Message ..... 19

Recording/Deleting an

Outgoing Message ..... 20

Setting the System to

Answer Calls .............. 20

Screening Calls .......... 20

Recording

Incoming Messages ... 21

Recording a Memo ..... 21

Recording a

Conversation .............. 21

Playing Messages ...... 22

Adjusting the

Volume ....................... 23

Deleting Messages ..... 23

Remote Operation ...... 23

Using

Remote Commands ... 24

Troubleshooting ............. 26

Care ............................... 27

FCC Statement .............. 27

#"+/2146#06"#

If an icon appears at the end of

a paragraph, go to the box on

that page with the

corresponding icon for

pertinent information.

Rý— Warning

#— Important

.— Caution

°°

°— Hint

±— Note

43-3821.fm Page 4 Friday, May 10, 2002 10:08 AM

Important Safety Instructions

may touch dangerous voltage points or short out

parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

Servicing — Do not attempt to service this product

yourself, as opening or removing covers may

expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

Damage Requiring Service — Unplug this product

from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

• When the power-supply cord or plug is

damaged.

• If liquid has been spilled or objects have fallen

into the product.

• If the product has been exposed to rain or

water.

• If the product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the

operating instructions, as an improper

adjustment of other controls may result in

damage and will often require extensive work

by a qualified technician to restore the product

to normal operation.

• If the product has been dropped or damaged in

any way.

• When the product exhibits a distinct change in

performance.

Lightning — Avoid using a telephone (other than a

cordless type) during an electrical storm, as there

might be a remote risk of electric shock from

lightning.

Gas Leak — Do not use the telephone to report a

gas leak in the vicinity of the leak.

43-3821.fm Page 5 Friday, May 10, 2002 10:08 AM

Battery Safety Instructions

$#66'4;"5#('6;"

+05647%6+105

To reduce the risk of fire or injury to persons, read

and follow these instructions.

• Use only the required size and type of

batteries.

• Do not dispose of batteries in a fire. They can

explode. Check with local codes for possible

special disposal instructions.

• Do not open or mutilate batteries. Released

electrolyte is corrosive, can cause damage to

the eyes or skin, and can be toxic if swallowed.

• Be careful when handling batteries in order not

to short them with conducting materials such

as rings, bracelets, and keys. The battery or

conductor can overheat and cause burns.

• Charge the batteries provided with or identified

for use with this product only in accordance

with the instructions and limitations specified in

this manual.

• Observe proper polarity orientation between

the batteries and battery charger.

• Do not mix old and new batteries in this

product.

• Do not mix batteries of different sizes or from

different manufacturers in this product.

5#8'"6*'5'"+05647%6+105

4'#&"6*+5"$'(14'"+056#..#6+10

We have designed your phone to conformto federal

regulations and you can connect it to most phone

lines. However, each device that you connect to the

telephone line draws power from the line. We refer

to this power draw as the phone’s ringer

#"+/2146#06"#

Cordless phones such as

this one require AC power

to operate. When the AC

power is off, you cannot dial

out or receive incoming

calls using your phone. To

be safe, you should also

have a phone that does not

need AC power to operate

(not a cordless phone) so

you can still make and

receive calls if there is an

AC power failure.

When AC power is lost, the

phone loses the security

access-protection code

connection between the

base and the handset.

When power is restored, put

the handset on the base

briefly to restore this

connection.

43-3821.fm Page 6 Friday, May 10, 2002 10:08 AM

Installation

equivalence number, or REN. The REN is on the

bottom of your phone.

If you use more than one phone or other device on

the line, add up all the RENs. If the total is more

than five (three in rural areas), your phones might

not ring. If ringer operation is impaired, remove one

of the devices from the line.

The digital answering system stores up to 16

minutes of messages on a computer chip and

records each message’s day and time. This gives

you advanced capabilities over tape-based

answering machines:

• You can delete individual messages and save

the rest.

• There are no tapes to bother with and no tape

mechanisms to wear out.

The remote operation feature lets you operate your

answering system from a touch-tone phone (or from

a rotary phone with a pocket tone dialer).

+056#..#6+10

Before using your phone, carefully peel the

protective film off the display. The film protects the

handset window during shipment and is not

necessary for use.

/1706+0)"6*'"2*10'

You can place the phone on a desk or table, mount

it on a standard wall plate, or directly on a wall.

Choose a location that is:

• near an AC outlet

• near a modular telephone line jack

• out of the way of normal activities

43-3821.fm Page 7 Friday, May 10, 2002 10:08 AM

Installation

• away from electrical machinery, electrical

appliances, metal walls or filing cabinets,

wireless intercoms, alarms, and room monitors

• away from other cordless phones

You can try different locations to see which provides

the best performance. .#

Your telephone connects directly to a modular

telephone line jack. If your telephone wiring does

not have a modular jack, you can update the wiring

yourself using jacks and adapters (available at your

local RadioShack store or online at

RadioShack.com), or have the telephone company

update the wiring for you. You must use compatible

modular jacks that are compliant with Part 68 of

FCC Rules

. The USOC number of the jack to be

installed is RJ11C (RJ11W for a wall plate).

10"#"&'5-"612

1. Plug one end of the supplied long modular cord

into the TEL LINE jack on the base’s back.

2. Plug the modular cord’s other end into a

modular telephone line jack.

3. Insert the supplied AC adapter’s barrel plug

into the DC IN 9V jack on the back.

4. Route the adapter’s

cord through the strain

relief slot on the base’s

bottom.

5. Plug the adapter into a

standard AC outlet.

6. Lift the base’s antenna

to a vertical position.

."%#76+10".

You must use a

Class 2 power

source that

supplies 9V DC and

delivers at least 350 mA.

Its center tip must be set

to positive and its plug

must fit the phone's DC

IN 9V jack. The supplied

adapter meets these

specifications. Using an

adapter that does not

meet these

specifications could

damage the phone or

the adapter.

• Always connect the AC

adapter to the phone

before you connect it to

AC power. When you

finish, disconnect the

adapter from AC power

before you disconnect it

from the phone.

DC IN 9V TEL LINE

43-3821.fm Page 8 Friday, May 10, 2002 10:08 AM

Installation

10"#"9#.."2.#6'"

14"9#..

To mount the phone directlyon a wall, you need two

screws (not supplied) with heads that fit into the

keyhole slots on the base. Drill two holes 315/16

inches apart. Thread a screw into each hole, letting

the heads extend about 1/8inch.

1. Plug one end of the supplied modular cord

(short for a wall plate, long for direct wall

mounting) into the TEL LINE jack on the base’s

back.

2. Insert the supplied AC adapter’s barrel plug

into the DC IN 9V jack.

3. Route the adapter and modular cords through

the base’s grooves.

For a wall plate

plug the modular

cord’s other end

into the wall plate

jack, then align the

base’s keyhole

slots with the wall

plate studs and

slide the base

downward to

secure it.

For direct wall

mounting

, align the

base’s keyhole

slots with the

mounting screws

and slide the base

downward to

secure it.

5. Plug the adapter

into a standard AC

outlet.

TEL LINE

DC IN 9V

43-3821.fm Page 9 Friday, May 10, 2002 10:08 AM

Installation

6. Lift the base’s antenna to a vertical position.

%100'%6+0)."%*#4)+0)"#0&"

4'2.#%+0)"6*'"$#66'4;"2#%-

The phone comes with a rechargeable Ni-Cd

(nickel-cadmium) battery pack installed in the

handset, but not connected. Before using your

phone, you must connect the battery pack, then

charge it for about 24 hours.

1. Press down and slide off the battery pack

compartment cover.

2. Lift the battery pack out of the compartment.

3. Plug the battery

pack’s connector

into the socket in

the compartment.

The connector fits

only one way.

4. Put the battery pack in the compartment.

5. Replace the cover.

To charge the battery pack, place the handset on

the base, face up or down. The base’s CHARGE/IN

USE indicator lights. #"

Recharge the battery pack when the handset beeps

and TALK/BATT flashes. ±ý

When you first use the phone after charging or

recharging the battery pack, the phone might not

work and you might hear error beeps. If this

happens, return the handset to the base for about 5

seconds to reset the security access-protection

code.

Using a pencil eraser, clean the charging contacts

on the handset and the base about once a month.

#"+/2146#06"#

Be sure the battery pack is

properly connected before

you try to charge it. The

CHARGE/IN USE indicator

lights when the handset is

on the base even if the

battery pack is not

connected properly.

±"016'"±"

• If the phone does not

work, recharge the

battery pack. (The

battery power might be

too low for the display to

operate.)

• If the battery pack

becomes weak during a

call, the handset beeps

about every 3 seconds

andTALK/BATTflashes.

When this happens, you

cannot make a call on

the phone until you

recharge the battery

pack.

• If the battery pack is

completely discharged

or the base loses power

while the handset is

away from it, place the

handset on the base to

reset the security

access-protection code.

If it was the handset that

lost power, recharge the

battery pack.

43-3821.fm Page 10 Friday, May 10, 2002 10:08 AM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack Two-Line Caller ID Phone With Speakerphone Bedienungsanleitung

Radio Shack

Radio Shack Cordless Telephone Bedienungsanleitung

Radio Shack

Radio Shack CID-927 Bedienungsanleitung

Radio Shack

Radio Shack 43-3701 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller... Bedienungsanleitung

Radio Shack

Radio Shack ET-537 Bedienungsanleitung

Radio Shack

Radio Shack 43-3820 Bedienungsanleitung

Radio Shack

Radio Shack ET-925 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum... Bedienungsanleitung

Radio Shack

Radio Shack 43-3514 Bedienungsanleitung

Radio Shack

Radio Shack 43-3536 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone with Digital Answerer and Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack Caller ID System 1500 Bedienungsanleitung

Radio Shack

Radio Shack 43-3556 Bedienungsanleitung

Radio Shack

Radio Shack 43-3535 Bedienungsanleitung

Radio Shack

Radio Shack ET-542 Bedienungsanleitung

Radio Shack

Radio Shack 43-3581 Bedienungsanleitung

Radio Shack

Radio Shack ET-917 Bedienungsanleitung

Radio Shack

Radio Shack Cordless Phone Bedienungsanleitung

Radio Shack

Radio Shack ET-1102 Bedienungsanleitung

Radio Shack

Radio Shack ET-536 Bedienungsanleitung

Radio Shack

Radio Shack 43-3571 Bedienungsanleitung

Radio Shack

Radio Shack TAD-734 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung