Radio Shack ET-919 Bedienungsanleitung

Cat. No. 43-1089

OWNER’S MANUAL

Please read before using this equipment.

ET-919

9-Memory 900-MHz Cordless Telephone

43-1089.fm Page 1 Tuesday, August 17, 1999 3:24 PM

FEATURES

Redial — lets you quickly redial the last

number dialed.

9-Number Memor

Dialin

— lets you

store up to 9 numbers in memory for

easy dialing.

e— lets you send a paging signal

from the base to the handset to page

someone or locate the handset if you

misplace it.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as Call Waiting.

Mute — prevents the person on the

phone from hearing your conversation

with someone in the room.

Volume Control — lets you adjust the

volume you hear through the handset.

Tone/Pulse Dialin

— lets you use

your phone with touch-tone or pulse ser-

vice.

Quick Talk — lets you answer a call by

just lifting the handset from the base.

Hearin

-Aid Compatibilit

— lets you

use your phone with hearing aids that

have a T (telephone) switch.

COM-LOK and RadioShack are registered trademarks used by Tandy Corporation.

Your RadioShack ET-919 9-Memory

900-MHz Cordless Telephone uses the

900 MHz band which means less inter-

ference, clearer sound, and greater

range than 46/49 MHz cordless tele-

phones. Its cordless operation lets you

make or answer calls just about any-

where in your home or office.

And, its headset jack means you can

connect an optional headset for hands-

free convenience while you use the

phone.

The ET-919’s features include:

900 MHz Operation — provides better

sound and less interference than many

other cordless phones.

20 Channels — automatically selects a

clear channel when you make or answer

a call. You can also manually change

channels during a call.

Super CCT Noise-Reduction Circuitr

— gives you sound clarity comparable

to that of a corded phone.

Securit

Access-Protection Code —

automatically prevents other cordless

phone users from using your phone line

while the handset is off the base.

COM-LOK®— ensures that other cord-

less phone users cannot use your phone

line when the handset is on the base.

43-1089.fm Page 2 Tuesday, August 17, 1999 3:24 PM

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

Your telephone operates on standard

radio frequencies as allocated by the

FCC. Even though the security access-

protection code prevents unauthorized

use of your phone line, it is possible for

other radio units operating on similar fre-

quencies within a certain area to unin-

tentionally intercept your conversations

and/or cause interference. This lack of

privacy can occur with any cordless

phone.

Important Note: Cordless phones such

as this one require AC power to operate.

When the AC power is off, you cannot

dial out or receive incoming calls using

your phone. To be safe, you should also

have a phone that does not need AC

power to operate (not a cordless phone)

so you can still make and receive calls if

there is an AC power failure.

We recommend you record your

phone’s serial number here. The num-

ber is on the bottom of the base.

Serial Number:

This symbol is intended to alert you to

the presence of uninsulated danger-

ous voltage within the product’s enclo-

sure that might be of sufficient

magnitude to constitute a risk of elec-

tric shock. Do not open the product’s

case.

This symbol is intended to inform you

that important operating and mainte-

nance instructions are included in the

literature accompanying this product.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

WARNING: To reduce the risk of

fire or shock hazard, do not ex-

pose this product to rain or mois-

ture.

43-1089.fm Page 3 Tuesday, August 17, 1999 3:24 PM

READ THIS BEFORE

INSTALLATION

Each device that you connect to the

phone line draws power from the phone

line. We refer to this power draw as the

device’s

ringer equivalence number

, or

REN. The REN is on the bottom of the

base.

If you are using more than one phone or

other device on the line, add up all the

RENs. If the total is more than five, your

phones might not ring. In rural areas, a

total REN of three might impair ringer

operation. If ringer operation is impaired,

remove a device from the line.

FCC STATEMENT

This telephone complies with Part 68 of

FCC Rules

. You must, upon request,

provide the FCC Registration Number

and the REN to your phone company.

These numbers are located on the bot-

tom of the base.

Note: You must not connect your phone

to any of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

43-1089.fm Page 4 Tuesday, August 17, 1999 3:24 PM

CONTENTS

Preparation .............................................................................................................. 6

Selecting a Location ........................................................................................... 6

Attaching the Handset’s Antenna ....................................................................... 6

Placing the Base on a Desk Top ........................................................................ 7

Mounting the Base on a Wall Plate .................................................................... 8

Mounting the Base Directly on the Wall ............................................................. 9

Connecting and Charging the Battery Pack ..................................................... 11

Setting the Dialing Mode .................................................................................. 12

Turning the Ringer On/Off ................................................................................ 13

Operation ............................................................................................................... 14

Making and Receiving Calls ............................................................................. 14

Selecting the Channel ...................................................................................... 14

Using Mute ....................................................................................................... 14

Setting the Handset’s Volume .......................................................................... 15

Using Redial ..................................................................................................... 15

Using Flash ...................................................................................................... 15

Using Tone Services on a Pulse Line ............................................................... 16

Using Page ....................................................................................................... 16

Memory Dialing ................................................................................................ 16

Storing a Number in Memory ..................................................................... 16

Entering a Pause ....................................................................................... 17

Dialing a Memory Number ......................................................................... 17

Chain-Dialing Service Numbers ................................................................. 17

Testing Stored Emergency Numbers ......................................................... 18

Using a Headset ............................................................................................... 18

Troubleshootin

.................................................................................................... 19

Care and Maintenance .......................................................................................... 21

Replacing the Battery Pack .............................................................................. 22

The FCC Wants You to Know ........................................................................... 23

Lightning ........................................................................................................... 23

43-1089.fm Page 5 Tuesday, August 17, 1999 3:24 PM

PREPARATION

SELECTING A LOCATION

You can place the phone on a desk top

or table, mount it on a standard wall

plate, or mount it directly on a wall. Se-

lect a location that is:

• near an AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of sev-

eral locations, try each to see which

provides the best performance.

Caution: The supplied RadioShack AC

adapter was designed specifically for

your ET-919. Use only the supplied

adapter.

Notes:

• Your telephone connects directly to

a modular telephone line jack. If

your phone line jack is not a modu-

lar jack, you can update the wiring

yourself, using jacks and adapters

available at your local RadioShack

store. Or, you can let the phone

company update the wiring for you.

• The USOC number of the jack to be

installed is RJ11C (RJ11W if you

want to mount it on a wall plate).

ATTACHING THE

HANDSET’S ANTENNA

Insert the antenna into the hole on the

top of the handset, then rotate the an-

tenna clockwise until it is secure.

43-1089.fm Page 6 Tuesday, August 17, 1999 3:24 PM

PLACING THE BASE ON A

DESK TOP

Follow these steps when you place the

base on a desk, shelf, or table.

1. Remove the bracket by holding in

both tabs and gently pulling out the

wide end of the bracket.

2. Plug one end of the supplied long

modular cord into the phone jack on

the back of the base.

3. Insert the supplied AC adapter’s

barrel plug into the DC 12V jack on

the back of the base.

4. Route the adapter’s cord through

the strain relief slot on the bottom of

the base.

5. Insert the tabs on the narrow end of

the bracket into the lower slots on

the bottom of the base and push the

tabs on the wide end of the bracket

into the upper slots on the bottom of

the base.

6. Plug the modular cord’s other end

into a modular phone line jack.

Strain

Relief

Slot

43-1089.fm Page 7 Tuesday, August 17, 1999 3:24 PM

7. Plug the adapter into a standard AC

outlet.

8. Lift the base’s antenna to a vertical

position.

MOUNTING THE BASE ON

A WALL PLATE

1. Remove the bracket by holding in

both tabs and gently pulling out the

wide end of the bracket.

2. Plug one end of the supplied short

modular cord into the phone jack on

the back of the base. Route the

modular cord through the left slot on

the bottom of the base.

3. Insert the supplied AC adapter’s

barrel plug into the DC 12V jack on

the back of the base. Route the

adapter’s cord through the right slot

on the bottom of the base.

4. Route the other end of the short

modular cord through the center of

the bracket.

Phone Jack

DC 12V

Jack

43-1089.fm Page 8 Tuesday, August 17, 1999 3:24 PM

5. Insert the tabs on the narrow end of

the bracket into the upper slots on

the bottom of the base, then push

the tabs on the wide end of the

bracket into the lower slots on the

bottom of the base.

6. Plug the short modular cord into the

wall plate jack, align the base’s key-

hole slots with the wall plate studs,

and slide the base downward to

secure it.

7. Plug the adapter into a standard AC

outlet.

8. Lift the base’s antenna to a vertical

position.

MOUNTING THE BASE

DIRECTLY ON THE WALL

For this mounting method, you need two

flat-head screws (not supplied) with

heads that fit into the keyhole slots on

the mounting bracket.

1. Drill two holes 315/16

inches (100 mm) apart.

Then thread a screw

into each hole, letting

the heads extend

about

3/16 inch (5 mm)

from the wall.

2. Remove the bracket by holding in

both tabs and gently pulling out the

wide end of the bracket.

3. Plug one end of the supplied long

modular cord into the phone jack on

the back of the base. Route the

modular cord through the left slot on

the bottom of the base and pull the

cord down to remove any slack on

top.

315/16"

3/16"

Phone Jack

43-1089.fm Page 9 Tuesday, August 17, 1999 3:24 PM

4. Insert the supplied AC adapter’s

barrel plug into the DC 12V jack on

the back of the base. Route the

adapter’s cord through the right slot

on the bottom of the base.

5. Insert the tabs on the narrow end of

the bracket into the upper slots on

the bottom of the base, guide the

modular and adapter cords through

the cord slots on the bracket, and

push the tabs on the wide end of the

bracket into the slots on the bottom

of the base.

6. Align the keyhole slots with the

mounting screws and slide the base

downward to secure it.

7. Plug the modular cord into a modu-

lar phone line jack.

8. Plug the adapter into a standard AC

outlet.

9. Lift the base’s antenna to a vertical

position.

DC 12V Jack

43-1089.fm Page 10 Tuesday, August 17, 1999 3:24 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack ET-1124 Bedienungsanleitung

Radio Shack

Radio Shack 43-3824 Bedienungsanleitung

Radio Shack

Radio Shack TAD-268 Bedienungsanleitung

Radio Shack

Radio Shack 43-3514 Bedienungsanleitung

Radio Shack

Radio Shack ET-1104 Bedienungsanleitung

Radio Shack

Radio Shack ET-546 Bedienungsanleitung

Radio Shack

Radio Shack ET-521 Bedienungsanleitung

Radio Shack

Radio Shack 43-3571 Bedienungsanleitung

Radio Shack

Radio Shack 43-3535 Bedienungsanleitung

Radio Shack

Radio Shack 43-325 Bedienungsanleitung

Radio Shack

Radio Shack ET-3504 Bedienungsanleitung

Radio Shack

Radio Shack 43-3578 Bedienungsanleitung

Radio Shack

Radio Shack ET-686 Bedienungsanleitung

Radio Shack

Radio Shack ET-518 Bedienungsanleitung

Radio Shack

Radio Shack 43-1122 Bedienungsanleitung

Radio Shack

Radio Shack ET-553 Bedienungsanleitung

Radio Shack

Radio Shack ET-687 Bedienungsanleitung

Radio Shack

Radio Shack ET-1105 Bedienungsanleitung

Radio Shack

Radio Shack 43-1107 Bedienungsanleitung

Radio Shack

Radio Shack 43-329 Bedienungsanleitung

Radio Shack

Radio Shack 43-5862 Bedienungsanleitung

Radio Shack

Radio Shack ET-1125 Bedienungsanleitung

Radio Shack

Radio Shack 43-5829 Bedienungsanleitung

Radio Shack

Radio Shack 2-Line 900 MHz Handsfree Cordless Phone Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung