Radio Shack ET-598 Bedienungsanleitung

Cat. No. 43-698A

OWNER’S MANUAL

Please read before using this equipment.

ET-598

25-Channel

2-Line Cordless Telephone

with Dual Keypads

43-698a.fm Page 1 Friday, August 13, 1999 12:56 PM

FEATURES

Your RadioShack ET-598 25-Channel

2-Line Cordless Telephone with Dual

Keypads lets you place and receive

calls on two separate telephone lines.

It is designed to exacting standards

that ensure reliability, long life, and

outstanding performance.

Its features include:

Two-Line Telephone S

stem — lets

you easily handle two telephone lines

at the same time. You can also use

both lines at the same time to make 4-

way conference calls.

Dual Ke

pads — a full set of keys on

both the ET-598’s handset and base

let you use either keypad to make and

answer calls or program the phone’s

features.

Speakerphone — lets you make or

answer calls without using the hand-

set.

25 Channels — lets you change to an-

other channel during a call to reduce

interference.

20-Number Memor

Dialin

— lets

you store up to 20 numbers in memory

(10 on the handset and 10 on the

base) for easy dialing.

Super CCT Noise-Reduction Cir-

cuitr

— gives you sound clarity com-

parable to corded telephones.

Securit

Access-Protection Code —

prevents other cordless phone users

from using your phone line while the

handset is off the base.

COM-LOK®— ensures that other

cordless phone users cannot use your

phone line when the handset is on the

base.

Redial — lets you quickly redial the

last number dialed.

/Two-Wa

Intercom S

stem

— sends a signal from the base to the

handset so you can page someone or

locate the handset if you have mis-

placed it. If someone answers, you can

use the ET-598 like a two-way inter-

com.

Flash — sends an electronic switch-

hook signal so you can use the phone

with special phone services, such as

Call Waiting.

Tone/Pulse Dialin

— lets you use

your phone with either type of service.

Quick Talk — lets you quickly make or

answer a call by simply lifting the hand-

set from the base.

Hearin

-Aid Compatibilit

— lets

you use your phone with hearing aids

that have a T (telephone) switch.

COM-LOK and RadiShack are registered trademarks used by Tandy Corporation.

43-698a.fm Page 2 Friday, August 13, 1999 12:56 PM

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

We recommend you record your

phone’s serial number here. The num-

ber is on the bottom of the base.

Serial Number:

Important Note: Cordless phones

such as your ET-598 require AC power

to operate. When the AC power is off,

you cannot dial out or receive incoming

calls using this phone. To be safe, you

should also have a phone that does

not need AC power to operate (not a

cordless phone) so you can still make

and receive calls if there is an AC pow-

er failure.

Your telephone operates on standard

radio frequencies as allocated by the

FCC. Even though the access protec-

tion code prevents unauthorized use

of your phone line, it is possible for

other radio units operating on similar

frequencies within a certain area to

unintentionally intercept your conver-

sations and/or cause interference.

This lack of privacy can occur with any

cordless phone.

This symbol is intended to alert you

to the presence of uninsulated dan-

gerous voltage within the product’s

enclosure that might be of sufficient

magnitude to constitute a risk of

electric shock. Do not open the

product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are in-

cluded in the literature accompany-

ing this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

Warning: To prevent fire or shock

hazard, do not expose this product

to rain or moisture.

CAUTION

43-698a.fm Page 3 Friday, August 13, 1999 12:56 PM

READ THIS BEFORE

INSTALLATION

Each device that you connect to the

phone line draws power from the

phone line. We refer to this power draw

as the device’s

ringer equivalence

number

, or REN. The REN for your

ET-598 is located on the bottom of the

base.

If you are using more than one phone

or other device on the line, add up all

the RENs. If the total is more than five,

your phones might not ring. In rural ar-

eas, a total REN of three might impair

ringer operation. If ringer operation is

impaired, remove a device from the

line.

FCC STATEMENT

This telephone complies with Part 68

FCC Rules

. Upon request, you must

provide the FCC Registration Number

and the REN to your phone company.

These numbers are located on the bot-

tom of the base.

Note: You must not connect your

phone to any of the following:

• coin-operated systems

• party-line systems

• most electronic key phone sys-

tems

43-698a.fm Page 4 Friday, August 13, 1999 12:56 PM

CONTENTS

Installation ............................................................................................................ 6

Selecting a Location ........................................................................................ 6

Mounting/Connecting the Phone ..................................................................... 6

Placing the Base on a Desk Top ............................................................... 7

Mounting the Base on a Wall Plate ........................................................... 8

Mounting the Base Directly on the Wall .................................................. 10

Connecting and Charging the Battery Pack .................................................. 12

Setting the Dialing Mode ............................................................................... 14

Turning the Ringer On/Off ............................................................................. 14

Operation ............................................................................................................ 15

Handset Operation ........................................................................................ 15

Making a Call .......................................................................................... 15

Answering a Call ..................................................................................... 15

Changing the Channel ............................................................................ 16

Speakerphone Operation .............................................................................. 16

Making a Call .......................................................................................... 16

Answering a Call ..................................................................................... 16

Using Privacy .......................................................................................... 17

Adjusting the Speakerphone Volume ..................................................... 17

Putting a Call on Hold ................................................................................... 17

Switching Between the Handset and Speakerphone .................................... 18

Using Both the Handset and Speakerphone .......................................... 18

Making a Conference Call ............................................................................. 19

Using Redial .................................................................................................. 20

Using Flash ................................................................................................... 20

Using Tone Services on a Pulse Line ........................................................... 20

Using the Paging/Intercom Features ............................................................ 21

Memory Dialing ............................................................................................. 22

Storing a Number in Memory .................................................................. 22

Entering a Pause .................................................................................... 23

Dialing a Memory Number ...................................................................... 23

Chain-Dialing Service Numbers ............................................................. 23

Testing Stored Emergency Numbers ...................................................... 23

Troubleshootin

................................................................................................ 24

Care and Maintenance ...................................................................................... 26

Replacing the Battery Pack ........................................................................... 27

The FCC Wants You to Know ....................................................................... 28

Lightning ....................................................................................................... 28

43-698a.fm Page 5 Friday, August 13, 1999 12:56 PM

INSTALLATION

SELECTING A

LOCATION

You can place the phone on a desk top

or table, or mount it on a wall. Select a

location that is:

• near an AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls

or filing cabinets, wireless inter-

coms, alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of

several locations, try each to see

which provides the best performance.

MOUNTING/CONNECTING

THE PHONE

To use both of the ET-598’s lines, you

must connect it to two separate tele-

phone lines. Each of these lines must

have its own phone number. If you do

not have two telephone lines, contact

your phone company to get a second

line.

You can connect your telephone to a

2-line modular telephone jack using

the supplied 2-line modular cord.

Or, you can connect it to two separate

1-line modular telephone jacks using

the supplied 2-line modular cord and a

1-line modular cord (such as Ra-

dioShack Cat. No. 279-356, not sup-

plied).

Notes:

• Two-line and single-line modular

cords look alike but are wired dif-

ferently. To use the ET-598’s two

lines, use only the supplied two-

line modular cord to connect to a

two-line modular jack.

• You can also use the ET-598 with

a single 1-line modular jack.

If your phone wiring does not have a

modular phone jack, you can:

• Update the wiring yourself, using

jacks and adapters available at

your local RadioShack store

• Have the phone company update

the wiring for you

Note: The USOC number of the jack to

be installed is RJ14C for a two-line

baseboard jack or RJ14W for a two-

line wall-plate jack.

Caution: The supplied RadioShack

adapter was designed specifically for

your ET-598. Use only the supplied

adapter.

43-698a.fm Page 6 Friday, August 13, 1999 12:56 PM

Placing the Base

on a Desk Top

Follow these steps when you place

the base on a desk, shelf, or table.

1. If you have a single 2-line modular

jack, plug one end of the supplied

modular cord into the TEL LINE 1/2

jack.

Note: When you make this con-

nection, you should not connect

another modular cord to the TEL

LINE 2 jack or phone operation will

be erratic.

If you have two separate 1-line

modular jacks, plug one end of the

supplied modular cord into the

TEL LINE 1/2 jack and plug an-

other modular cord (not supplied)

into the TEL LINE 2 jack.

If you have only a single 1-line

modular jack, plug one end of the

supplied modular cord into the

TEL LINE 1/2 jack to use line 1, or

into the TEL LINE 2 jack to use

line 2.

2. Plug the supplied AC adapter’s

barrel plug into the DC IN 9V jack.

3. Route the adapter’s cord through

the strain relief slot.

4. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

Strain Relief Slot

43-698a.fm Page 7 Friday, August 13, 1999 12:56 PM

5. Plug the other end(s) of the modu-

lar cord(s) into the modular

jack(s).

6. Raise the base’s antenna to a ver-

tical position and fully extend it.

Mounting the Base

on a Wall Plate

To make this connection, you need a

2-line short modular cord, such as

Cat. No. 279-390 (not supplied).

1. If you have a single 2-line modular

jack on the wall plate, plug one

end of a 2-line short modular cord

into the TEL LINE 1/2 jack.

Note: When you make this con-

nection, you should not connect

another modular cord to the TEL

LINE 2 jack or phone operation will

be erratic.

If you have a single 1-line modular

jack on the wall plate and a modu-

lar wall jack close by, plug one

end of a short modular cord into

the TEL LINE 1/2 jack to use line 1,

then connect the supplied modu-

lar cord into the TEL LINE 2 jack to

use line 2.

If you have only a single 1-line

modular jack on the wall plate,

plug one end of a short modular

cord into the TEL LINE 1/2 jack to

use line 1, or to the TEL LINE 2

jack to use line 2.

43-698a.fm Page 8 Friday, August 13, 1999 12:56 PM

2. Plug the supplied AC adapter’s

barrel plug into the DC IN 9V jack.

3. Route the adapter cord through

both the upper and lower grooves

and the modular cord(s) through

only the upper groove on the bot-

tom of the base.

Note: If you are using two modu-

lar cords, route both through the

appropriate grooves.

Upper

Grooves

Lower

Groove

4. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

5. Plug the other end(s) of the modu-

lar cord(s) into the wall plate jack

(and wall jack, if appropriate), then

align the base’s keyhole slots with

the wall plate studs and slide the

base downward to secure it.

6. Press and lift out the handset

holder, rotate it 180°, then snap it

back into place so it holds the

handset.

43-698a.fm Page 9 Friday, August 13, 1999 12:56 PM

7. Raise the base’s antenna to a ver-

tical position and fully extend it.

Mounting the Base

Directly on the Wall

To mount the base directly on the wall,

you need two wood screws (not sup-

plied) with heads that fit into the key-

hole slots on the bottom of the base.

1. Drill two holes 315/16

inches apart. Then

thread a screw into

each hole, letting the

heads extend about

5/16 inch from the wall.

5/16

315/16

2. If you have a single 2-line modular

jack, plug one end of the supplied

modular cord into the TEL LINE 1/2

jack.

Note: When you make this con-

nection, you should not connect

another modular cord to the TEL

LINE 2 jack or phone operation will

be erratic.

If you have two separate 1-line

modular jacks, plug one end of the

supplied modular cord into the

TEL LINE 1/2 jack and plug an-

other modular cord (not supplied)

into the TEL LINE 2 jack.

If you have only a single 1-line

modular jack, plug one end of the

supplied modular cord into the

TEL LINE 1/2 jack to use line 1, or

into the TEL LINE 2 jack to use

line 2.

43-698a.fm Page 10 Friday, August 13, 1999 12:56 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack 43-3581 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack TAD-268 Bedienungsanleitung

Radio Shack

Radio Shack ET-687 Bedienungsanleitung

Radio Shack

Radio Shack ET-1105 Bedienungsanleitung

Radio Shack

Radio Shack ET-3504 Bedienungsanleitung

Radio Shack

Radio Shack ET-925 Bedienungsanleitung

Radio Shack

Radio Shack 43-3815/43-3898 Bedienungsanleitung

Radio Shack

Radio Shack ET-905 Bedienungsanleitung

Radio Shack

Radio Shack 43-3820 Bedienungsanleitung

Radio Shack

Radio Shack TAD-733 Bedienungsanleitung

Radio Shack

Radio Shack ET-908 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1015 Bedienungsanleitung

Radio Shack

Radio Shack ET-910 Bedienungsanleitung

Radio Shack

Radio Shack 43-5560 Bedienungsanleitung

Radio Shack

Radio Shack 43-3577 Bedienungsanleitung

Radio Shack

Radio Shack 43-3827 Bedienungsanleitung

Radio Shack

Radio Shack 43-3533 Bedienungsanleitung

Radio Shack

Radio Shack ET-1102 Bedienungsanleitung

Radio Shack

Radio Shack CID-927 Bedienungsanleitung

Radio Shack

Radio Shack ET-1110 Bedienungsanleitung

Radio Shack

Radio Shack RT-551 Bedienungsanleitung

Radio Shack

Radio Shack Two-Line Caller ID Phone With Speakerphone Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller... Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung