Radio Shack TAD-1017 Bedienungsanleitung

Cat. No. 43-776

OWNER’S MANUAL

Please read before using this equipment.

TAD-1017

900 MHz Cordless Telephone

with Di

ital Answerin

System

43-776.fm Page 1 Friday, August 13, 1999 3:34 PM

RadioShack is a registered trademark used by Tandy Corporation.

FEATURES

Your RadioShack TAD-1017 900 MHz

Cordless Telephone with Digital An-

swering System uses advanced ana-

log cordless telephone technology to

give you superior audio quality. Its

cordless operation lets you move free-

ly around your home or office.

The TAD (Telephone Answering De-

vice) stores up to 20 minutes of mes-

sages on a computer chip. This gives

you advanced capabilities over tape-

based answering machines. For ex-

ample, you can delete individual mes-

sages and save the rest. Because

your TAD is fully digital, there are no

tapes to bother with, no tape mecha-

nisms to wear out, and no lost mes-

sages if power fails.

The remote operation feature lets you

access your TAD from a touch-tone

phone, and guides you through sys-

tem operation with voice prompts.

Telephone Features

900 MHz Operation — provides long-

er range and less interference than

many other cordless phones.

40 Channels —let you change to an-

other channel if you hear interference.

Securit

Access-Protection Code

— minimizes the chances of other

cordless phones using your phone

line.

Headset Jack — lets you connect an

optional headset for hands-free con-

venience.

Redial

— lets you quickly dial the last

number dialed.

10-Number Memor

Dialin

— lets

you store up to 10 phone numbers in

memory for easy dialing.

stem — lets you send a

signal from the base to the handset so

you can page someone or easily lo-

cate the handset when it is away from

the base.

Flash — sends an electronic switch-

hook signal for use with special phone

services such as Call Waiting.

Tone or Pulse Dialin

— lets you

use your phone with either type of ser-

vice.

TAD Features

Date/Time Stamp — records the day

and time each message was record-

ed.

itall

-S

nthesized Voice —

guides you through operation of the

system.

ital Volume Control — lets you

adjust the volume of incoming mes-

sage playback.

43-776.fm Page 2 Friday, August 13, 1999 3:34 PM

Prerecorded Messages — give you

the option of using existing outgoing

messages or recording your own.

Announcement Only — lets you play

an announcement for callers to hear,

without recording their messages.

LED Digital Message Counter —

shows the number of messages the

TAD has recorded.

Remote Operation — lets you use a

touch-tone phone (or rotary phone

and pocket tone dialer) to operate the

TAD while you are away from your

home or office.

Programmable PIN — you can set a

two-digit personal identification num-

ber (PIN) for secure remote operation.

Remote Answer-On — lets you call

the TAD from a remote location even

when it is not set to answer calls.

Call Screening — lets you listen as a

caller leaves a message so you can

decide whether or not to answer the

call.

Memo Recording — lets you leave

messages for yourself or others in

your home or office.

Adjustable Ring Number — lets you

set the TAD to answer after three or

seven rings.

Toll-Saver — lets you avoid unnec-

essary long-distance charges when

you call by long distance to check your

messages.

Phone Pick-Up Detection — stops

recording when you pick up any

phone on the same line as the TAD,

and resets to answer the next call.

We recommend you record the tele-

phone’s serial number here. The num-

ber is on the bottom of the base.

Serial Number ________________

This TAD has been tested and found

to comply with all applicable UL and

FCC standards.

This symbol is intended to alert you

to the presence of uninsulated dan-

gerous voltage within the product’s

enclosure that might be of sufficient

magnitude to constitute a risk of

electric shock. Do not open the

product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are in-

cluded in the literature accompany-

ing this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

Warning: To prevent fire or shock

hazard, do not expose this product

to rain or moisture.

CAUTION

43-776.fm Page 3 Friday, August 13, 1999 3:34 PM

READ THIS BEFORE

INSTALLATION

Your telephone conforms to federal

regulations, and you can connect it to

most telephone lines. However, each

device you connect to the phone line

draws power from the phone line. We

refer to this power draw as the de-

vice’s

ringer equivalence number

, or

REN. The REN is on the label on the

back of the base.

If you are using more than one phone

or other device on the line, add up all

the RENs. If the total is more than five,

your phone might not ring and your

answering system might not answer.

In rural areas, a total REN of three

might impair ringer operation. If ringer

operation is impaired, remove a de-

vice from the line.

FCC STATEMENT

This telephone complies with Part 68

FCC Rules

. You must, upon re-

quest, provide the FCC Registration

Number and the REN to your phone

company. These numbers are on the

label on the back of the base.

You must not connect your phone to

any of the following:

• Coin-operated systems

• Party-line systems

• Most electronic key phone sys-

tems

Important:

• Cordless phones such as this one

require AC power to operate.

When AC power is off, you cannot

dial out or receive incoming calls

using your TAD-1017. For this

reason, the TAD-1017 should not

be your only telephone. To be

safe, you should also have a

phone that does not require AC

power to operate (not a cordless

phone) so you can still make and

receive calls if there is an AC

power failure.

• Your telephone operates on stan-

dard radio frequencies, as allo-

cated by the FCC. Even though

the security access-protection

code prevents unauthorized use

of your phone line, it is possible

for other radio units operating on

similar frequencies within a cer-

tain area to unintentionally inter-

cept your conversations and/or

cause interference. This lack of

privacy can occur with any cord-

less phone.

• When AC power is lost, the TAD-

1017 loses the security access-

protection code connection

between the base and the hand-

set. When power is restored, put

the handset on the base briefly to

restore this connection so you can

use the handset.

43-776.fm Page 4 Friday, August 13, 1999 3:34 PM

CONTENTS

Installation ............................................................................................................ 7

Selecting a Location ........................................................................................ 7

Placing the Base on a Desk Top ............................................................... 7

Mounting the Base on a Wall Plate ........................................................... 8

Mounting the Base Directly on the Wall .................................................. 10

Preparation ......................................................................................................... 12

Connecting and Charging the Battery Pack .................................................. 12

Setting the Dialing Mode ............................................................................... 13

Setting the Base’s Ringer Volume ................................................................. 14

Telephone Operation ......................................................................................... 15

Making and Receiving Calls .......................................................................... 15

Changing the Channel .................................................................................. 15

Using Redial .................................................................................................. 15

Using Flash ................................................................................................... 16

Using Tone Services on a Pulse Line ........................................................... 16

Paging ........................................................................................................... 16

Memory Dialing ............................................................................................. 17

Storing a Number in Memory .................................................................. 17

Entering a Pause .................................................................................... 18

Dialing a Stored Number ........................................................................ 18

Chain-Dialing Service Numbers ............................................................. 18

Testing Stored Emergency Numbers ...................................................... 18

Using a Headset ........................................................................................... 19

TAD Operation ................................................................................................... 20

Using the Handset to Control the TAD .......................................................... 20

Setting the Number of Rings ......................................................................... 21

Setting the Day and Time .............................................................................. 21

Selecting an Outgoing Message ................................................................... 22

Recording an Outgoing Message ........................................................... 22

Setting the TAD to Answer Calls ................................................................... 23

Screening Calls ............................................................................................. 23

Recording a Memo ........................................................................................ 24

Playing Messages ......................................................................................... 24

Deleting Messages ....................................................................................... 26

Adjusting the TAD’s Volume .......................................................................... 26

Remote Operation ............................................................................................. 27

Using the Toll-Saver ...................................................................................... 27

Setting the Remote Operation PIN ............................................................... 27

Accessing the TAD by Remote ..................................................................... 27

43-776.fm Page 5 Friday, August 13, 1999 3:34 PM

Troubleshooting ................................................................................................. 29

Care and Maintenance ....................................................................................... 31

Replacing the Battery Pack ........................................................................... 32

The FCC Wants You to Know ........................................................................ 33

Lightning ........................................................................................................ 34

43-776.fm Page 6 Friday, August 13, 1999 3:34 PM

INSTALLATION

SELECTING A

LOCATION

You can place the TAD-1017’s base

on a desk or table, or mount it on a

wall. Select a location that is:

• Near an AC outlet

• Near a telephone line jack

• Away from electrical machinery,

electrical appliances, and metal

walls or filing cabinets

• Away from wireless intercoms,

alarms, room monitors, and other

cordless telephones

The base’s location affects the

phone’s range. If you have a choice of

several locations, try each to see

which provides the best performance.

Caution: The supplied RadioShack

adapter is designed specifically for

your TAD-1017. Use only the supplied

adapter.

Notes:

• Your telephone connects directly

to a modular telephone line jack. If

your phone line jack is not a mod-

ular jack, you can update the wir-

ing yourself, using jacks and

adapters available at your local

RadioShack store. Or, you can let

the phone company update the

wiring for you.

• The USOC number of the jack to

be installed is RJ11C (RJ11W if

you want to mount the phone on a

wall plate).

Placing the Base on a

Desk Top

Follow these steps when you place the

base on a desk, shelf, or table.

1. Plug one end of the supplied long

modular cord into the TEL LINE

jack on the back of the base.

2. Plug the modular cord’s other end

into a modular phone line jack.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

43-776.fm Page 7 Friday, August 13, 1999 3:34 PM

4. Route the adapter’s cord through

the strain relief slot on the base.

5. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

6. Lift the base’s antenna to a verti-

cal position.

Strain Relief Slot

Mounting the Base on a

Wall Plate

1. Plug one end of the supplied short

modular cord into the TEL LINE

jack on the back of the base.

2. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the back of the base.

43-776.fm Page 8 Friday, August 13, 1999 3:34 PM

3. Route the adapter’s cord through

the upper and lower grooves and

the modular cord through only the

upper groove on the bottom of the

base.

4. Plug the modular cord’s other end

into the wall plate jack, then align

the base’s keyhole slots with the

wall plate studs and slide the base

downward to secure it.

5. Plug the adapter into a standard

AC outlet. The POWER indicator

on the base lights.

6. Press and lift out the handset

holder, rotate it 180°, then snap it

back into place so it holds the

handset.

7. Raise the base’s antenna to a ver-

tical position.

Upper

Grooves

Lower

Groove

43-776.fm Page 9 Friday, August 13, 1999 3:34 PM

Mounting the Base

Directly on the Wall

To mount the base directly on the wall,

you need two wood screws (not sup-

plied) with heads that fit into the key-

hole slots on the bottom of the base.

1. Drill two holes 315/16

inches apart. Then

thread a screw into

each hole, letting

the heads extend

about

5/16 inch from

the wall.

2. Plug one end of the modular cord

into the TEL LINE jack on the back

of the base.

3. Plug the supplied AC adapter’s

barrel plug into the DC IN 9V jack.

4. Route the adapter and modular

cords through the upper and lower

grooves on the bottom of the

base.

5. Align the keyhole slots with the

mounting screws and slide the

base downward to secure it.

315/16

5/16

Lower

Grooves

Upper

Grooves

43-776.fm Page 10 Friday, August 13, 1999 3:34 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack 43-324 Bedienungsanleitung

Radio Shack

Radio Shack 43-5829 Bedienungsanleitung

Radio Shack

Radio Shack 2-Line 900 MHz Handsfree Cordless Phone Bedienungsanleitung

Radio Shack

Radio Shack 43-3535 Bedienungsanleitung

Radio Shack

Radio Shack ET-1109 Bedienungsanleitung

Radio Shack

Radio Shack 43-3556 Bedienungsanleitung

Radio Shack

Radio Shack 43-3546 Bedienungsanleitung

Radio Shack

Radio Shack Cordless Telephone Bedienungsanleitung

Radio Shack

Radio Shack ET-557 Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack ET-689 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless... Bedienungsanleitung

Radio Shack

Radio Shack ET-1105 Bedienungsanleitung

Radio Shack

Radio Shack ET-542 Bedienungsanleitung

Radio Shack

Radio Shack 43-3824 Bedienungsanleitung

Radio Shack

Radio Shack 43-3887 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack TAD-1010 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung

Radio Shack

Radio Shack ET-547 Bedienungsanleitung

Radio Shack

Radio Shack ET-596 Bedienungsanleitung

Radio Shack

Radio Shack 43-3549 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung