Radio Shack 43-3535 Bedienungsanleitung

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

OWNER’S MANUAL

;22/*\"%QTFNGUU"6GNGRJQPG

YKVJ"%CNNGT"+&1%CNN"9CKVKPI

43-3535/43-3544/43-3545

30-Record CID Capacity — stores

up to 30 call records in Caller ID.

Ample Talk and Standby Time — the supplied

battery (when fully charged) provides about 7

hours of talk time or 14 days of standby time.

Headset Jack — lets you connect an optional

headset for hands-free convenience.

Auto Talk— lets you set the phone to answer

a call by simply lifting the handset from the

base.

10-Number Memory Dialing — letsyoustore

up to 10 numbers in memory for easy dialing.

#"+/2146#06"#

If an icon appears at the end of a paragraph, go

to the box on that page with the corresponding

icon for pertinent information.

Rý— Warning #— Important .

.— Caution

All manuals and user guides at all-guides.com

all-guides.com

+/2146#06"

+0(14/#6+10

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

(%%"56#6'/'06

Your phone complies with Part 68 of

FCC Rules

. You must, upon request,

provide the FCC registration number

and the REN to your telephone

company. Both numbers are on the

back of your phone.

We have designed your phone to

conform to federal regulations, and you

can connect it to most telephone lines.

However, each phone (and each

device, such as a telephone or

answering machine) that you connect

to the telephone line draws power from

the telephone line. We refer to this

power draw as the device's ringer

equivalence number, or REN. The REN

is on the back of your phone. ±

If you use more than one phone or

other device on the line, add up all of

the RENs. If the total is more than five

(three in rural areas), your telephones

might not ring. If ringer operation is

impaired, remove a device from the line.

±"016'"±"

You must not connect

your phone to:

• coin-operated

systems

• party-line systems

• most electronic key

telephone systems

Important Information

The lightning symbol is intended to

alert you to the presence of uninsu-

lated dangerous voltage within this

product’s enclosure that might be of

sufficientmagnitude to constitute a

risk of electric shock. Do not open

the product’s case.

The exclamation symbol is intended

to inform you that important operat-

ing and maintenance instructions

are included in the literature accom-

panying this product.

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to

rain or moisture.

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE COV-

ER OR BACK. NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

AsanENERGYSTAR Partner,

RadioShack Corporation

has determined that this

product meets the ENER-

GYSTAR guidelines for en-

ergy efficiency.

All manuals and user guides at all-guides.com

Important Information

In the unlikely event that your phone

causes problems on the phone line, the

phone company can temporarily

discontinue your service. If this

happens, the phone company attempts

to notify you in advance. If advance

notice is not practical, the phone

company notifies you as soon as

possible and advises you of your right

to file a complaint with the FCC.

Also, the phone company can make

changes to its lines, equipment,

operations, or procedures that could

affect the operation of this telephone.

The telephone company notifies you of

these changes in advance, so you can

take the necessary steps to prevent

interruption of your telephone service.

.+)*60+0)

Your telephone has built-in protection

circuits to reduce the risk of damage

from surges in telephone line and

power line current. These protection

circuits meet or exceed the FCC

requirements, however, lightning

striking the telephone or power lines

can damage your telephone.

Lightning damage is not common.

Nevertheless, if you live in an area that

has severe electrical storms, we

%106'065

Important Information 2

FCC Statement ..... 2

Lightning ............... 3

Important Safety

Instructions ........... 4

Introduction .............. 8

Installation ................ 9

Selecting a

Location ................ 9

Connecting/Charging

the Battery Pack . 12

Setting the

Ringer Tone

and Volume ......... 15

Turning Auto Talk

On/Off ................. 16

Turning Caller ID/

Call Waiting

On/Off ................. 17

Storing Your

Area Code ........... 17

Setting the

Dialing Mode ....... 18

Selecting the

Language ............ 19

Operation ............... 20

Making and

Receiving Calls ... 20

Selecting the

Channel .............. 21

Adjusting the

Handset’s Volume 21

(Continued)

All manuals and user guides at all-guides.com

Important Information

suggest you unplug your phone when

storms approach to reduce the

possibility of damage.

+/2146#06"5#('6;"

+05647%6+105

When using your telephone equipment,

basic safety precautions should always

be followed to reduce the risk of fire,

electric shock and injury to persons,

including the following:

1. Read and understand all

instructions.

2. Follow all warnings and

instructions marked on the

product.

3. Never install telephone wiring

during a lightning storm.

4. Never install telephone jacks in

wet locations unless the jack is

specifically designed for wet

locations.

5. Never touch uninstalled telephone

wires or terminals unless the

telephone line has been

disconnected at the network

interface.

6. Use caution when installing or

modifying telephone lines.

%106'065

(Continued)

Using Redial ....... 22

Using Flash ......... 22

Muting the Ringer 22

Using Tone Services

on a Pulse Line ... 23

Paging ................. 23

Using a Headset . 24

Memory Dialing ... 24

Speed Dialing ..... 30

Caller ID Operation 32

Important Caller ID

Information .......... 33

Reviewing Caller ID

Records .............. 33

Adding/Deleting the

Area Code ........... 35

Dialing Numbers

from a

Caller ID Record . 36

Storing a Caller ID

Record

in Memory ........... 36

Deleting Caller ID

Records .............. 37

Troubleshooting ..... 39

Care ....................... 42

Service and Repair . 42

All manuals and user guides at all-guides.com

Important Information

7. Do not fix the AC power supply

cord to building surfaces with

metal fittings (if the product has an

AC power cord).

8. Unplug this product from the wall

outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

9. Do not use this product near water,

for example, near a bathtub, wash

bowl, kitchen sink, or laundry tub,

in a wet basement, or near a

swimming pool.

10. Do not place this product on an

unstable cart, stand, or table. The

product may fall, causing serious

damage to the product.

11. Slots and openings in the cabinet

and the back or bottom are

provided for ventilation. To protect

it from overheating, these

openings must not be blocked or

covered. The openings should

never be blocked by placing the

product on a bed, sofa, rug, or

other similar surface. This product

should never be placed near or

over a radiator or heat register.

This product should not be placed

in a built-in installation unless

proper ventilation is provided.

$CVVGT[

5CHGV["

+PUVTWEVKQPU

To reduce the risk of fire

or injury, read and follow

these instructions.

1. Use only the

appropriate type and

size battery pack

specified in the

instruction manual

provided for this

product.

2. Do not dispose of the

battery pack in a fire.

The cell may explode.

Check with local

codes for possible

special disposal

instructions.

3. Do not open or

mutilate the battery

pack. Released

electrolytes are

corrosive and may

cause damage to the

eyes or skin. It may

be toxic if swallowed.

4. Exercise care in

handling the battery

pack in order not to

short it with

conducting materials

(Continued)

All manuals and user guides at all-guides.com

Important Information

12. This product should be operated

only from the type of power source

indicated on the marking label. If

you are not sure of the type of

power supply to your home,

consult your local power company.

13. Do not allow anything to rest on the

power cord. Do not locate this

product where the cord will be

stepped on.

14. Do not overload wall outlets and

extension cords as this can result

in a risk of fire or electric shock.

15. Never push objects of any kind into

this product through cabinet slots

as they may touch dangerous

voltage points or short out parts

that could result in a risk of fire or

electric shock. Never spill liquid of

any kind on the product.

16. To reduce the risk of electric shock,

do not disassemble this product.

Take it to a qualified service

technician when service or repair

work is required. Opening or

removing covers may expose you

to dangerous voltage or other

risks. Incorrect reassembly can

cause electric shock when the

product is subsequently used.

$CVVGT[

5CHGV["

+PUVTWEVKQPU

(Continued)

such as rings,

bracelets, and keys.

The battery or

conductor may

overheat and cause

burns.

5. Charge the battery

pack provided or

identified for use with

this product only in

accordance with the

instructions and

limitationsspecified in

theinstructionmanual

provided for this

product.

6. Observe proper

polarity orientation

between the battery

pack and battery

charger.

SAVE THESE

INSTRUCTIONS

All manuals and user guides at all-guides.com

all-guides.com

Important Information

17. Unplug this product from the wall

outlet and refer servicing to

qualified service personnel under

the following conditions:

• When the power cord plug is

damaged or frayed.

• If liquid has been spilled, into

the product.

• If the product has been exposed

to rain or water.

• If the product does not operate

normally by following the

operating instructions. Adjust

only those controls that are

covered by the operating

instructions because improper

adjustment of other controls

may result in damage and will

often require extensive work by

a qualified technician to restore

the product to normal operation.

• If the product has been dropped

or the cabinet has been

damaged.

• If the product exhibits a distinct

change in performance.

18. Avoid using a telephone (other

than a cordless type) during an

All manuals and user guides at all-guides.com

Introduction

electrical storm. There may be a

remote risk of electric shock from

lightning.

19. Do not use the telephone to report

a gas leak if the phone is in the

vicinity of the leak.

+0641&7%6+10

Thank you for purchasing the

RadioShack 900 MHz Cordless

Telephone. Your phone uses advanced

technology to give you superior audio

quality and extended range. The

phone’s Caller ID unit records each

caller’s telephone number (and name, if

available in your area) and the date and

time of the call, as provided by your

local phone company to Caller ID

service subscribers. If you subscribe to

Call Waiting with Caller ID, the phone

shows you the incoming caller

information, even when you are already

talking on the phone. #

Your phone operates on standard radio

frequencies as allocated by the FCC. It

is possible for other nearby radio units

operating on similar frequencies to

unintentionally intercept your

conversation or cause interference.

This possible lack of privacy can occur

with any cordless phone.

#"+/2146#06"#

• Cordless phones

such as this one

require AC power to

operate. When the

power is off, you

cannot make or

receive calls using

your phone. To be

safe, you should also

have a phone that

does not need AC

power to operate (not

a cordless phone), so

you can still make

and receive calls if

there is an AC power

failure.

• When AC power is

lost, the phone loses

the security access-

protection code

connection between

the base and the

handset. When

power is restored, put

the handset on the

base briefly to restore

this connection so

you can use the

handset.

All manuals and user guides at all-guides.com

Installation

+056#..#6+10

5'.'%6+0)"#".1%#6+10

You can place the phone’s base on a

desk or table, or mount it on a standard

wall plate or directly on a wall. Select a

location that is:

• near an accessible AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls

or filing cabinets, wireless

intercoms, alarms, and room

monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of

several locations, try each to see which

provides the best performance..

Your telephone connects directly to a

modular telephone line jack. If your

telephone wiring does not have a

modular jack, you can update the wiring

yourself using jacks and adapters

(available at your local RadioShack

store), or have the telephone company

update the wiring for you. You must use

."%#76+10".

You must use

a Class 2

power

source that supplies

9V DC and delivers at

least 210 mA. Its

center tip must be set

to positive and its plug

must fit the phone's

DC IN 9V jack. The

supplied adapter

meets these specifi-

cations. Using an

adapter that does not

meet these specifica-

tions could damage

the phone or the adapter.

• Always connect the

AC adapter to the

phone before you

connect it to AC

power. When you

finish, disconnect the

adapter from AC

power before you

disconnect it from the

phone.

All manuals and user guides at all-guides.com

Installation

compatible modular jacks that are

compliant with Part 68 of

FCC Rules

1P"C"&GUM"6QR

1. Plug one end of the supplied long

modular cord into the TEL LINE

jack on the bottom of the base.

2. Plug the modular cord’s other end

into a modular phone line jack.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

on the bottom of the base.

4. Route the adapter’s cord through

the strain relief slot on the base,

then plug the adapter into a

standard AC outlet.

1P"C"9CNN"2NCVG

1. Plug one end of the supplied short

modular cord into the TEL LINE

jack on the bottom of the base.

Then insert the supplied AC

adapter’s barrel plug into the DC IN

9V jack on the bottom of the base.

±"016'"±"

The USOC number of

the jack to be installed is

RJ11C (or RJ11W for a

wall plate jack).

All manuals and user guides at all-guides.com

Andere Handbücher für 43-3535

Dieses Handbuch passt für folgende Modelle

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack ET-908 Bedienungsanleitung

Radio Shack

Radio Shack ET-543 Bedienungsanleitung

Radio Shack

Radio Shack ET-1124 Bedienungsanleitung

Radio Shack

Radio Shack 43-3558 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1015 Bedienungsanleitung

Radio Shack

Radio Shack ET-539 Bedienungsanleitung

Radio Shack

Radio Shack ET-910 Bedienungsanleitung

Radio Shack

Radio Shack 43-1088 Bedienungsanleitung

Radio Shack

Radio Shack RT-551 Bedienungsanleitung

Radio Shack

Radio Shack 4301122D Bedienungsanleitung

Radio Shack

Radio Shack 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital... Bedienungsanleitung

Radio Shack

Radio Shack 43-1122 Bedienungsanleitung

Radio Shack

Radio Shack 43-3576 Bedienungsanleitung

Radio Shack

Radio Shack TAD-727 Bedienungsanleitung

Radio Shack

Radio Shack Presidian Bedienungsanleitung

Radio Shack

Radio Shack ET-927 Bedienungsanleitung

Radio Shack

Radio Shack 43-3814 Bedienungsanleitung

Radio Shack

Radio Shack 43-3537 Bedienungsanleitung

Radio Shack

Radio Shack 43-3577 Bedienungsanleitung

Radio Shack

Radio Shack 43-3824 Bedienungsanleitung

Radio Shack

Radio Shack ET-539 Bedienungsanleitung

Radio Shack

Radio Shack ET-905 Bedienungsanleitung

Radio Shack

Radio Shack 43-3548 Bedienungsanleitung

Radio Shack

Radio Shack ET-1110 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung