Radio Shack ET-1105 Bedienungsanleitung

Cat. No. 43-1105

OWNER’S MANUAL

Please read before using this equipment.

ET-1105

Digital Spread Spectrum

900 MHz Cordless Telephone

with Caller ID/Call Waiting ID

43-1105.fm Page 1 Monday, August 30, 1999 1:57 PM

FEATURES

RadioShack is a registered trademark used by Tandy Corporation.

Your RadioShack ET-1105 Digital

Spread Spectrum 900 MHz Cordless

Telephone uses advanced digital cord-

less technology to give you superior

sound quality and extended range. The

telephone digitizes and scrambles your

conversation before transmitting it be-

tween the handset and the base, so your

conversation is secure from interception

by other cordless telephone or scanner

users. Its cordless operation lets you

handle calls just about anywhere in your

home or office.

The phone can display a caller’s phone

number, name (if available), and the

date and time the call was received. It

can store up to 45 records as provided

by your local phone company to Caller

ID service subscribers.

If you have Call Waiting with Caller ID,

the phone displays incoming caller infor-

mation for a new call when you are al-

ready on the phone.

The ET-1105 has these features:

900 MHz Operation — provides better

sound and less interference than many

other cordless phones.

Digital Spread Spectrum — provides

the longest range and the utmost in se-

curity. Frequencies are constantly

changing across the entire 900 MHz

band, making your calls impossible to

monitor on scanners.

Headset Jack — lets you connect an op-

tional headset (such as RadioShack Cat.

No. 43-195) for hands-free convenience

while you use the phone.

20-Number Memory Dialing — lets you

store 20 numbers in memory for easy di-

aling.

Volume Control — lets you adjust the

volume you hear through the handset.

Page —lets you send a paging signal

from the base to the handset to page

someone or locate the handset when it is

away from the base.

4-Hour Talk or 7-Day Standby Time —

lets you talk for 4 hours or keep the

phone off the base for 7 days without re-

charging (with a fully charged battery

pack).

Caller ID Memory Dialing — lets you

select a phone number stored in Caller

ID memory, then dial it with the touch of

a button.

20 Channels — automatically selects a

clear channel when you make or answer

a call.

VIP Memory — alerts you with a distinc-

tive ring when someone you have added

to the VIP list calls.

43-1105.fm Page 2 Monday, August 30, 1999 1:57 PM

Review Scrolling — lets you easily

scroll through all information stored in

the ET-1105’s Caller ID memory.

Phone Information Display — lets you

see incoming Caller ID information and

phone numbers as you dial them or re-

call them from the ET-1105’s memory

and Caller ID records.

Trilingual Messages — lets you set the

phone to display messages in English,

French, or Spanish.

Out of Range Signal — the handset

beeps twice to let you know when you

move out of the base’s operating range.

Security Access-Protection Code —

helps prevent other cordless phone us-

ers from using your phone line while the

handset is off the base.

Flash — sends an electronic switchhook

signal for use with special phone servic-

es such as Call Waiting.

Redial — lets you quickly redial the last

number dialed.

Tone/Pulse Dialing — lets you use your

phone with tone or pulse service.

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

WARNING:To reduce the risk of fire or shock

hazard, do not expose this product to rain or

moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to alert

you to the presence of uninsu-

lated dangerous voltage within

the product’s enclosure that might

be of sufficient magnitude to con-

stitute a risk of electric shock. Do

not open the product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature accom-

panying this product.

43-1105.fm Page 3 Monday, August 30, 1999 1:57 PM

Important Caller ID Information

To use the phone’s Caller ID and Call

Waiting features, you must be in an area

where Caller ID and Call Waiting servic-

es are available and you must subscribe

to the services.

Where Caller ID is offered, one or more

of the following options are generally

available:

• Caller’s number only

• Caller’s name only

• Caller’s name and number

For the ET-1105’s Caller ID memory dial

feature to operate, you must receive the

caller’s number.

Important: Cordless phones such as

this one require AC power to operate.

When the AC power is off, you cannot

dial out or receive incoming calls using

your ET-1105. For this reason, the ET-

1105 cordless phone should not be your

only telephone. To be safe, you should

also have a corded phone that does not

require AC power to operate so you can

still make and receive calls if there is an

AC power failure.

Your telephone operates on standard ra-

dio frequencies as allocated by the FCC.

Even though the access protection code

prevents unauthorized use of your phone

line, it is possible for other radio units op-

erating on similar frequencies within a

certain area to unintentionally intercept

your conversations and/or cause inter-

ference. This lack of privacy can occur

with any cordless phone.

READ THIS BEFORE

INSTALLATION

Each device that you connect to the

phone line draws power from the phone

line. We refer to this power draw as the

device’s

ringer equivalence number

, or

REN. The REN is on the bottom of the

base.

If you are using more than one phone or

other device on the line, add up all the

RENs. If the total is more than five (three

in rural areas), your phone might not

ring. If ringer operation is impaired, re-

move a device from the line.

FCC STATEMENT

This telephone complies with Part 68 of

FCC Rules

. You must, upon request,

provide the FCC registration number and

the REN to your phone company. These

numbers are on the bottom of the base.

Note: You must not connect your ET-

1105 to any of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

43-1105.fm Page 4 Monday, August 30, 1999 1:57 PM

CONTENTS

Preparation .............................................................................................................. 6

Selecting a Location ........................................................................................... 6

Attaching the Handset’s Antenna ....................................................................... 6

Placing the Base on a Desk Top ........................................................................ 6

Mounting the Base on a Wall Plate .................................................................... 8

Connecting and Charging the Battery Pack ....................................................... 9

Setting the Dialing Mode .................................................................................. 11

Selecting the Language .................................................................................... 11

Setting the Area Code ...................................................................................... 12

Setting the Ringer ............................................................................................. 12

Turning the Ringer On or Off ...................................................................... 12

Checking/Setting the Ringer ...................................................................... 12

Using a Headset ............................................................................................... 13

Removing the Belt Clip ..................................................................................... 13

Telephone Operation ............................................................................................ 14

Making and Receiving a Call ............................................................................ 14

Setting the Handset’s Volume .......................................................................... 14

Using Redial ..................................................................................................... 14

Using Flash ...................................................................................................... 15

Using Tone Services on a Pulse Line ............................................................... 15

Using Page ....................................................................................................... 15

Memory Dialing ................................................................................................ 15

Storing a Number and Name in Memory ................................................... 16

Using the VIP Call List ............................................................................... 16

Entering a Pause ....................................................................................... 17

Recalling Numbers Stored in Memory ....................................................... 17

Dialing a Memory Number ......................................................................... 17

Chain-Dialing Service Numbers ................................................................. 17

Testing Stored Emergency Numbers ......................................................... 18

Deleting Information in a Single Memory Location .................................... 18

Deleting Information in All Memory Locations ........................................... 18

Caller ID Operation ............................................................................................... 19

Caller ID Displays ............................................................................................. 20

Reviewing Caller ID Records ............................................................................ 21

Storing Caller ID Records in a Memory Location ............................................. 21

Dialing Numbers from a Caller ID Record ........................................................ 21

Deleting Caller ID Records ............................................................................... 21

Troubleshooting .................................................................................................... 22

Care and Maintenance .......................................................................................... 25

43-1105.fm Page 5 Monday, August 30, 1999 1:57 PM

PREPARATION

SELECTING A LOCATION

You can place the phone on a desk top

or table, or mount it on a standard wall

plate. Select a location that is:

• near an accessible AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

The base’s location affects the phone’s

range. If you have a choice of several lo-

cations, try each to see which provides

the best performance.

Caution: The supplied AC adapter was

designed specifically for your ET-1105.

Use only the supplied adapter.

ATTACHING THE

HANDSET’S

ANTENNA

Screw the antenna into the

hole at the top of the hand-

set.

PLACING THE BASE ON A

DESK TOP

Follow these steps to place the base on

a desk, shelf, or table.

1. Remove the bracket by holding in

both tabs and gently pulling out the

wide end of the bracket.

2. Plug one end of the supplied long

modular cord into the phone jack on

the back of the base.

Tabs

43-1105.fm Page 6 Monday, August 30, 1999 1:57 PM

3. Insert the supplied AC adapter’s

barrel plug into the DC 9V jack on

the back of the base.

4. Route the adapter’s cord through

the strain relief slot on the bottom of

the base.

5. Insert the tabs on the narrow end of

the bracket into both upper slots on

the bottom of the base as shown

and push the tabs on the wide end

of the bracket into the upper slots on

the bottom of the base.

6. Plug the modular cord’s other end

into a modular phone line jack.

7. Plug the adapter into a standard AC

outlet.

8. Raise the base’s antenna to a verti-

cal position.

43-1105.fm Page 7 Monday, August 30, 1999 1:57 PM

MOUNTING THE BASE ON

A WALL PLATE

1. Follow Steps 1 through 3 under

“Placing the Base on a Desk Top” on

Page 6.

2. Route the modular cord through the

left groove on the bottom of the base

and the adapter cord through the

groove below the strain relief slot.

3. Insert the tabs on the narrow end of

the bracket into the slots on the bot-

tom of the base as shown and route

the other end of the short modular

cord through the center of the brack-

et.

4. Push the tabs on the wide end of the

bracket into the lower slots on the

bottom of the base.

5. Plug the short modular cord’s other

end into the wall plate jack, align the

base’s keyhole slots with the wall

plate studs, and slide the base

downward to secure it.

43-1105.fm Page 8 Monday, August 30, 1999 1:57 PM

6. Plug the adapter into a standard AC

outlet.

7. Raise the base’s antenna to a verti-

cal position.

CONNECTING AND

CHARGING THEBATTERY

PACK

The ET-1105 comes with a rechargeable

nickel-cadmium battery pack in the

handset but not connected. Before using

your phone, you must connect the bat-

tery pack and then charge it for about 16

hours.

1. Press down and slide off the com-

partment cover as shown.

2. Plug the battery pack’s connector

into the socket in the compartment.

The connector fits only one way.

Note: For easier battery pack con-

nection, lift it out of the compart-

ment, insert its connector into the

socket, then replace the battery

pack inside the compartment.

3. Replace the cover.

To charge the battery pack, place the

handset on the base. The CHARGE indi-

cator on the base lights.

Recharge the battery pack when

and LOW BATTERY appear on the

handset’s display.

43-1105.fm Page 9 Monday, August 30, 1999 1:57 PM

Notes:

• You can place the handset on the

base face down or face up without

removing the belt clip. If you want to

use the hanging hole on the back of

the handset to place the handset on

the wall-mounted base face-up, re-

move the belt clip (see “Removing

the Belt Clip” on Page 13). However,

the battery pack will not fully charge

in this position.

• When you first use the phone after

charging or recharging the battery

pack, the phone might not work and

you might hear an error tone when

you press TALK. If this happens, re-

turn the handset to the base for

about 6 seconds. This resets the se-

curity access protection code.

• If the CHARGE indicator does not

light when you place the handset on

the base, be sure the battery pack

and AC adapter are correctly and

securely connected.

Also, check the charging contacts

on the handset and the base. If the

contacts are dirty or tarnished,

clean them with a pencil eraser.

• If the battery pack gets completely

discharged or the base loses power

while the handset is away from it,

the security access-protection code

needs to be reset. To reset the code,

place the handset on the base. If it

was the handset that lost power,

leave the handset on the base to

charge the battery pack.

• If the battery pack gets weak during

a call, the handset beeps once ev-

ery 16 seconds. If this happens, you

cannot make another call on the

phone until you recharge the battery

pack.

• About once a month, fully discharge

the battery pack by keeping the

handset off the base until and

LOW BATTERY appear. Otherwise,

the battery pack loses its ability to

fully recharge.

• To avoid damage to the battery

pack, always recharge the handset

before battery power grows too

weak to display .

• If you are not going to use your

phone for an extended period of

time, disconnect the battery pack.

This increases the battery pack’s us-

able life.

• The supplied battery pack should

last for about a year. When it loses

its ability to fully recharge, order a

replacement battery pack from your

local RadioShack store (see “Re-

placing the Battery Pack” on

Page 26).

43-1105.fm Page 10 Monday, August 30, 1999 1:57 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack Caller ID System 1500 Bedienungsanleitung

Radio Shack

Radio Shack 43-3577 Bedienungsanleitung

Radio Shack

Radio Shack ET-686 Bedienungsanleitung

Radio Shack

Radio Shack 43-1122 Bedienungsanleitung

Radio Shack

Radio Shack ET-1104 Bedienungsanleitung

Radio Shack

Radio Shack ET-1101 Bedienungsanleitung

Radio Shack

Radio Shack TAD-734 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller... Bedienungsanleitung

Radio Shack

Radio Shack ET-546 Bedienungsanleitung

Radio Shack

Radio Shack ET-550 Bedienungsanleitung

Radio Shack

Radio Shack Cordless Telephone Bedienungsanleitung

Radio Shack

Radio Shack ET-553 Bedienungsanleitung

Radio Shack

Radio Shack 43-325 Bedienungsanleitung

Radio Shack

Radio Shack 43-1107 Bedienungsanleitung

Radio Shack

Radio Shack ET-532 Bedienungsanleitung

Radio Shack

Radio Shack ET-1106 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack ET-557 Bedienungsanleitung

Radio Shack

Radio Shack 43-329 Bedienungsanleitung

Radio Shack

Radio Shack ET-910 Bedienungsanleitung

Radio Shack

Radio Shack 43-3595 Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack 43-324 Bedienungsanleitung

Radio Shack

Radio Shack ET-687 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung