ResMed AirSense 10 Bedienungsanleitung

YOUR APRIA

SLEEP THERAPY

USER GUIDE

For the ResMed AirSense™10

Use this QR link to our

Sleep Apnea page

for more information.

WELCOME.

Thank you for choosing Apria Healthcare as your home medical

provider. You are receiving this package because your doctor has

diagnosed you with sleep apnea and prescribed Positive Airway

Pressure therapy. Positive Airway Pressure therapy—also known

as PAP therapy or sleep therapy—helps millions of users feel more

energized and refreshed.

We are excited to accompany you on your journey to a better

night’s sleep!

Responsive. On Time.

Apria Delivers.

With over 275 branch locations in the U.S., Apria is ready

to support patients every day and in times of need, with

well-established emergency preparedness protocols in place. Apria

has the knowledge, experience, and ability to provide excellent home

health and equipment delivery services in all types of environments.

MOBILIZED EFFORTS: Trained staﬀ members available around

the clock to coordinate urgent and after-hours orders and carry out

emergency services

24/7 DELIVERY SERVICES: Deliveries to homes, shelters and other

areas pre- and post-catastrophic events

275+ LOCATIONS NATIONWIDE: Local branches with teams ready

to serve patients, day or night

EXTENSIVE INVENTORY: Home oxygen therapy and respiratory

services, sleep therapy and supply reﬁlls,

non-invasive ventilation therapy, and negative pressure

wound therapy

Care is just around the corner.

Overview

Your doctor has prescribed PAP therapy because you have been

diagnosed with sleep apnea. Sleep apnea occurs when a person

repeatedly stops breathing for 10 or more seconds at a time while

sleeping. These events may occur hundreds of times throughout the

night, causing oxygen levels in the blood to drop, putting stress on

the heart. If left untreated, sleep apnea is linked to many other serious

conditions like high blood pressure, diabetes, heart disease and

stroke.

This guide contains easy step-by-step instructions for using your

PAP equipment, and is designed to help you beneﬁt from therapy as

soon as your equipment arrives. Please watch the sleep apnea video

on the enclosed DVD and review the manufacturer’s user guides

along with the other educational materials that were included with

your equipment. The sleep apnea video can also be found on Apria

Healthcare’s website at www.apria.com/resource-center in the

“Video Library” section located at the bottom of the screen. Additional

information is also available at www.apria.com/sleep-apnea.

Your Device and Settings

A licensed Apria clinician has programmed your PAP machine with

the settings prescribed by your physician. If your doctor recommends

changes to your PAP settings, please notify Apria Healthcare

immediately, so that the clinician can make any necessary adjustments.

Make sure your home address can be easily seen from the street

during both day and night.

If you are expecting a night delivery or visit, turn on the porch light.

Check to see that your address numbers are easy to spot and read

from the street. This will allow all Apria Healthcare and emergency

services to locate your residence easily.

Follow Emergency and Natural Disaster Instructions

In the event of an emergency or natural disaster, follow the radio or

television instructions of your local authorities.

Questions? Call 888.452.4363

4STEP 1: GETTING STARTED

Please watch the sleep apnea video on the DVD and review the

manufacturer’s user guides and other materials that were included

with your equipment. The sleep apnea video can also be found at

www.apria.com/resource-center in the “Video Library” section

located at the bottom of the screen.

GET STARTED.

STEP 1

Start your therapy tonight so you can feel refreshed in the morning.

1. Open the box and unpack your PAP machine, humidiﬁer chamber, tubing, mask, power

cord and supplies.

2. Attach the power cord and tubing to the PAP machine.

3. Fill the humidiﬁer with distilled water and insert the humidiﬁer into the PAP machine. (It is

recommended that you use distilled water. However, if you do not have distilled water

on hand, in order to start your therapy today, bottled water can be used as a substitute

to distilled water as a temporary measure.)

4. Place the PAP machine on a table next to your bed. The height of the table should be

lower than your head.

5. Plug the power cord into an electric wall outlet.

1 2

3 4

Questions? Call 888.452.4363 5

STEP 1: GETTING STARTED

SLP-4193 10/17

GET FAMILIAR

WITH YOUR PAP

EQUIPMENT.

If your doctor prescribed a speciﬁc mask and size, follow the ﬁtting instructions provided by

the manufacturer, then proceed to Step 3. If you received a mask with multiple cushions,

follow the instructions below and on the next page.

There is a mask cushion currently attached to the frame of your mask. This size ﬁts most patients.

Once you begin therapy, if your mask is leaking or feels uncomfortable, try removing the existing

cushion and replacing it with a diﬀerent size cushion. If you are between sizes, it is best to

use the larger cushion. Use the Fitting Template (for nasal mask and full face mask) and/or the

manufacturer’s instructions included with your mask for help.

STEP 2

STEP 2: GET FAMILIAR WITH YOUR PAP EQUIPMENT

6 STEP 2: GET FAMILIAR WITH YOUR PAP EQUIPMENT Questions? Call 888.452.4363

Nasal Mask

1. Release the lower strap magnets from the frame of the mask. Make sure the logo on the

headgear is facing outward. While holding the mask against your face, pull the headgear

over your head.

2. Position the lower straps so they both sit below the ears. Bring each of the magnets up to

meet their corresponding clips on the frame.

3. Adjust the fastening tabs on the upper straps until the mask feels even and stable.

Do not overtighten. Reattach the fastening tabs.

4. Repeat Step 3 with the lower straps. Reattach the fastening tabs.

5. Connect the hose to the front of the mask. Ensure that the nasal mask ﬁts securely over your

nose. It is normal to feel some air escaping through the small air vents on the elbow of the hose.

Please refer to the manufacturer’s instructions for additional information on topics, such as:

• How to properly remove your mask

• How to remove and change the mask cushion

• How to adjust the length of the mask straps

STEP 2: GET FAMILIAR WITH YOUR PAP EQUIPMENT

Questions? Call 888.452.4363

3.1.

5. 6.

Nasal Pillow Mask

1. Hold the pillows away from your nose with the left (L) and

right (R) indicators correctly facing towards you.

2. Guide the nasal pillows into your nostrils.

3. Pull the headgear over your head by holding the bottom

strap and stretching it around the back of your head.

4. Adjust the top and bottom straps. The top strap should ﬁt comfortably on the top of your head.

5. Ensure that the nasal pillows ﬁt securely into your nostrils with both pillows positioned upright.

If not, move the mask away from your face and then place it back again.

6. To achieve a comfortable ﬁt, adjust the straps. Spread the straps apart to loosen, or draw them

closer together to tighten.

Please refer to the manufacturer’s instructions for additional information on topics, such as:

• How to properly remove your mask

• How to remove and change the mask cushion

• How to adjust the length of the mask straps

8 STEP 2: GET FAMILIAR WITH YOUR PAP EQUIPMENT Questions? Call 888.452.4363

Full Face Mask

1. Twist and pull both magnetic clips away from the frame.

With the logo on the headgear facing outward, hold the mask

against your face and pull the headgear over your head.

2. Bring the lower straps below your ears and attach the

magnetic clip to the frame.

3. Undo the fastening tabs on the upper headgear straps. Pull the straps evenly until the mask is

stable and positioned as shown in the illustrations. Reattach the fastening tabs.

4. Undo the fastening tabs on the lower headgear straps. Pull the straps evenly until the mask sits

ﬁrmly on the chin and reattach the fastening tabs.

5. Connect the air tubing from your device to the elbow. Attach the elbow to the mask by pressing

the side buttons and pushing the elbow into the mask.

6. To achieve a comfortable ﬁt, readjust the straps. Evenly, apply only enough tension so that a

seal is achieved.

Please refer to the manufacturer’s instructions for additional information on topics, such as:

• How to properly remove your mask

• How to remove and change the mask cushion

• How to adjust the length of the mask straps

3.1.

5. 6.

STEP 2: GET FAMILIAR WITH YOUR PAP EQUIPMENT

Questions? Call 888.452.4363

How to Attach Oxygen

to Your PAP Machine

If you are using non-heated tubing, and you are also using prescribed oxygen,

follow these instructions.

Attach the oxygen tee adapter that was included in the box to your PAP machine.

Next, attach the large-bore PAP tubing to the oxygen tee adapter. Finally, connect the

small-bore oxygen tubing to the oxygen tee adapter.

For detailed instructions on oxygen use, you should also review the PAP and oxygen

manufacturer’s user guides included in your package.

Oxygen Tee Adapter

IMPORTANT SAFETY NOTE: If you are using prescribed oxygen with your PAP device, be sure to observe all the ﬁre and safety

rules associated with the use of oxygen. Follow this sequence of steps when turning your oxygen on and oﬀ. 1. Always turn

your PAP machine ON before turning ON the oxygen ﬂow from your oxygen source. 2. Always turn OFF the oxygen ﬂow from

your oxygen source before turning OFF the PAP machine.

ClimateLineAir™ and

ClimateLineAir™ Oxy Tubing

The ClimateLineAir™ heated tube is designed to maintain the temperature of the humidiﬁed

air as it passes through the tube. ClimateLineAir™ Oxy comes with a built-in oxygen connector for

patients who require supplemental oxygen.

The HumidAir humidiﬁer is part of ResMed’s Climate Control solution. It is designed to seamlessly

integrate with the device and oﬀer relief from dryness and congestion. The humidity level can be

adjusted to suit your preference.

When using ClimateLineAir™ and ClimateLineAir™ Oxy tubing, your device will automatically default

to Climate Control Auto when you plug either of these tubes into your machine (unless your doctor

has prescribed a speciﬁc heat and humidity setting).

Please review the ClimateLineAir™/ClimateLineAir™ Oxy manufacturer’s user guide for additional

information.

10 STEP 2: GET FAMILIAR WITH YOUR PAP EQUIPMENT Questions? Call 888.452.4363

If You Have

ClimateLineAir™

Oxy Heated Tubing:

Attach the oxygen using the illustrations and

directions provided here.

1. Remove the cap from the oxygen connector.

2. Connect the oxygen supply tubing to

the oxygen connector. Make sure it is

ﬁrmly attached.

If You Have

ClimateLineAir™

Heated Tubing:

Attach using the illustrations and directions

provided here.

1. Make sure the machine is turned on.

2.Hold the orange cuﬀ of the air tubing and

line up the air tubing connector with the

connector port.

3.Push the cuﬀ until the connector clicks

into place.

“ClimateLineAir connected” will brieﬂy display

on the device screen.

Andere Handbücher für AirSense 10

Inhaltsverzeichnis

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed Mirage Kidsta Bedienungsanleitung

ResMed

ResMed RCM1 Bedienungsanleitung

ResMed

ResMed Ultra Mirage Bedienungsanleitung

ResMed

ResMed AIRMINI Bedienungsanleitung

ResMed

ResMed S9 AutoSet Technisches Handbuch

ResMed

ResMed Ultra Mirage II Bedienungsanleitung

ResMed

ResMed Mirage Liberty Bedienungsanleitung

ResMed

ResMed VPAP Auto Bedienungsanleitung

ResMed

ResMed AirFit P10 Bedienungsanleitung

ResMed

ResMed AirFit N10 Bedienungsanleitung

ResMed

ResMed AIRMINI Bedienungsanleitung

ResMed

ResMed AirFit F20 Bedienungsanleitung

ResMed

ResMed AirFit N20 Classic Bedienungsanleitung

ResMed

ResMed S8 Compact System Bedienungsanleitung

ResMed

ResMed stellar series Bedienungsanleitung

ResMed

ResMed AirSense 11 Bedienungsanleitung

ResMed

ResMed AirStart 10 APAP Bedienungsanleitung

ResMed

ResMed AirSense 11 Bedienungsanleitung

ResMed

ResMed AirFit N30i Bedienungsanleitung

ResMed

ResMed S9 Series Bedienungsanleitung

ResMed

ResMed AirFit P10 Bedienungsanleitung

ResMed

ResMed S8 AutoScore II Bedienungsanleitung

ResMed

ResMed AirFit F20 Bedienungsanleitung

ResMed

ResMed VPAP ST Technisches Handbuch

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung