ResMed Mirage Liberty Bedienungsanleitung

Global leaders in sleep and respiratory medicine www.myresmed.com

Mirage Liberty™

FULL FACE MASK

User Guide

English • Français • Español • Português

618360/1 2020-06

MIRAGE LIBERTY

USER

AMER ML

618360

618300 cover.indd 1618300 cover.indd 1 30/06/2020 9:32:18 AM30/06/2020 9:32:18 AM

Manufacturer:

ResMed Pty Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia

See www.resmed.com for other ResMed locations worldwide.

For patent information, see www.resmed.com/ip.

Mirage and Mirage Liberty are trademarks of ResMed Pty Ltd and Mirage is registered in U.S.

Patent and Trademark Ofﬁce.

Velcro is a registered trademark of Velcro Industries B.V.

STERRAD and CIDEX are trademarks of Johnson & Johnson.

618300 cover.indd 2618300 cover.indd 2 30/06/2020 9:32:18 AM30/06/2020 9:32:18 AM

AMask parts / Composants du masque / Piezas de la mascarilla /

Peças da máscara

™

Mask cushion /

Bulle du masque /

Almohadilla bucal /

Almofada bucal

Mask frame / Entourage rigide /

Armazón de la mascarilla / Armação

da máscara

Ports cap / Bouchon d’entrées / Tapón de

los puertos / Tampa das portas

Valve / Valve /

Válvula / Válvula

Exhaust vents / Orifices de

ventilation / Orificios de

ventilación / Portas de exalação

Lower straps / Sangles inférieures /

Correas inferiores / Correias inferiores

Lower clip / Clip inférieur / Broche

inferior / Presilha inferior

BFitting the mask / Mise en place du masque / Colocación de la mascarilla / Ajuste da máscara

1 2 3 4 5

CDisassembling for cleaning / Démontage pour le nettoyage / Desmontaje para la limpieza / Desmontagem para limpeza

3 4 5 6 7

Inlet tube / Tuyau d’entrée / Tubo de entrada /

Tubo de entrada

Swivel / Pièce pivotante / Pieza

giratoria / Peça giratória

Nasal pillows /

Coussins narinaires /

Almohadillas nasales /

Almofadas nasais

Valve clip / Clip de la valve / Traba

de la válvula / Clipe da válvula

Right upper clip / Clip supérieur droit /

Broche superior derecho / Presilha superior

direita

Lower clip / Clip inférieur / Broche

inferior / Presilha inferior

Headgear parts / Composants du harnais / Piezas del arnés / Peças

do arnês

Elbow / Coude /

Codo / Cotovelo

Left upper clip / Clip supérieur

gauche / Broche superior

izquierdo / Presilha superior

esquerda

Valve flap / Clapet de

la valve / Aleta de la

válvula / Aba da válvula

Valve hinge / Charnière

de la valve / Bisagra de

la válvula / Articulação

da válvula

1 8

Cushion alignment guide / Repère d’alignement de la

bulle / Guía para alineación de la almohadilla / Guia de

alinhamento da almofada

Upperstraps/Sanglessupérieures/Correas

superiores / Correias superiores

618300 illo sheets.indd 1618300 illo sheets.indd 1 30/06/2020 9:22:57 AM30/06/2020 9:22:57 AM

DReassembling the mask / Remontage du masque / Montaje de la mascarilla / Montagem da máscara

1234

7 8

Mirage Liberty

Full Face Mask

Illustrations Sheet / Fiche d’illustrations /

Hoja de figuras / Folheto de ilustrações

Note: For complete instructions, please read the text section in

conjunction with the illustrations on this sheet.

Remarque:pourlesinstructionscomplètes,veuillezlireletextedu

guide avec cette fiche d’illustrations.

Nota: Para entender bien las instrucciones, lea el texto junto con

las figuras de esta hoja.

Nota: para obter instruções completas, leia a seção de texto em

conjunto com as ilustrações constantes deste folheto.

Component of: 618360/1

EReassembling the headgear / Remontage du harnais / Montaje

del arnés / Montagem do arnês

618300 illo sheets.indd 2618300 illo sheets.indd 2 30/06/2020 9:22:58 AM30/06/2020 9:22:58 AM

English

Mirage Liberty™

FULL FACE MASK

Thank you for choosing ResMed’s Mirage Liberty. The Mirage Liberty is a full

face mask that combines nasal pillows and a mouth cushion, creating a mask

that is both unobtrusive and easy to use without compromising seal, stability

and comfort.

The mask incorporates vent holes and a built-in valve so that you can continue

to breathe fresh air if the airflow to your mask is impeded for any reason.

Intended Use

The Mirage Liberty channels airflow noninvasively to a patient from a positive

airway pressure device such as a continuous positive airway pressure (CPAP)

or bilevel system.

The Mirage Liberty is to be used by adult patients (>66 lb/30 kg) for whom

positive airway pressure has been prescribed.

The Mirage Liberty is intended for single-patient re-use in the home

environment and multipatient re-use in the hospital/institutional environment.

CAUTION

In the USA, federal law restricts this device to sale by, or on the order of,

a physician.

Before Using the Mask

WARNING

•The Mirage Liberty must be used under qualified supervision with

patients who are unable to remove the mask by themselves.The mask

may not be suitable for those predisposed to aspiration.

•The elbow and valve assembly have specific safety functions.They

allow you to breathe fresh air if the airflow from your flow generator

to your mask is impeded.The mask should not be worn if the valve is

618300 content.book Page 1 Wednesday, May 2, 2018 8:46 AM

damaged as it will not be able to perform its safety function.The valve

should be replaced if it is damaged, distorted or torn.

•The vent holes must be kept clear.

•Follow all precautions when using supplemental oxygen.

•Any supplemental oxygen flow must be turned off when the flow

generator is not operating, so that unused oxygen does not

accumulate within the flow generator enclosure and create a risk of

fire.

•At a fixed flow rate of supplemental oxygen flow, the inhaled oxygen

concentration will vary, depending on the pressure settings, patient

breathing pattern, mask, point of application and leak rate.

•The technical specifications of the mask and flow generator are

provided for your clinician to check that they are compatible. If used

outside specification or if used with incompatible devices, the seal and

comfort of the mask may not be effective, optimum therapy may not

be achieved, and leak, or variation in the rate of leak, may affect the

flow generator function.

•Discontinue using the Mirage Liberty if you have ANY adverse

reaction to the mask system, and consult your physician or sleep

therapist.

•Discontinue using the Mirage Liberty if you experience nasal irritation,

and consult your physician or sleep therapist.

•Refer to your flow generator manual for details on settings and

operational information.

•Using a mask may cause tooth, gum or jaw soreness or aggravate an

existing dental condition. If symptoms occur, consult your physician or

dentist.

CAUTION

Avoid connecting flexible PVC products (eg. PVC tubing) directly to any

part of this mask. Flexible PVC contains elements that can be detrimental

to the materials of the mask, and may cause the components to crack or

break.

Using the Mask

Select ‘Mir Full’ or ‘Full Face’ as the mask option when using the Mirage

Liberty with ResMed flow generators that have mask setting options.

618300 content.book Page 2 Wednesday, May 2, 2018 8:46 AM

English

Fitting the mask

The diagrams in section Aon the illustrations sheet show how the parts of the

mask fit together.

The diagrams in section Bshow the suggested sequence for obtaining the

best fit and comfort in using your mask. Please follow these instructions

carefully.

1Wash your face thoroughly before fitting the mask. It is recommended that

you do not apply moisturizer where the mask contacts your face as it can

affect the mask seal.

2Place the headgear on your head, like you would a cap, and pull the mask

forward onto your face (B-1). Make sure that the headgear fits evenly on the

top of your head.

3Fit the mask over your mouth. Insert the pillows so that they sit gently just

inside the entrance to your nostrils.

4Push the lower headgear clips into the slots on the mask frame until they

click into place (B-2).

5To tighten or loosen the headgear straps, peel the Velcro®tab off the

headgear and reposition it. Gently and evenly adjust the upper headgear

straps (B-3), then the lower straps (B-4). Alternate the adjustment of each

set of straps until they are comfortable and firm and so that the upper

headgear clips rest between your eye and your ear. The mask should gently

‘float’ on your face. Do not overtighten the headgear straps.

6Connect one end of the main air tubing to your flow generator and the other

end to the swivel.

7Connect the elbow to the mask frame, holding the sides of the elbow then

firmly pushing it onto the frame until it clicks into place (B-5). Rotate the

elbow to check that it rotates freely and does not separate from the frame.

8Turn your flow generator on.

9If you feel air leaks, you may need to adjust your headgear. Return to step 5

or check through the suggestions in “Optimizing mask seal and comfort”

below.

Optimizing mask seal and comfort

To receive effective therapy it is important to have the best seal possible

between your mask and your face. If you are experiencing leaks, please ensure

that you have followed the fitting instructions carefully. Carry out a quick check

after fitting your mask:

•Is the mouth cushion creased? Creases can allow air to leak out of the

mask.

618300 content.book Page 3 Wednesday, May 2, 2018 8:46 AM

•Have you cleaned your mask recently? Oils on the cushion and pillows can

affect the seal.

•Are the pillows correctly seated in your nostrils? Re-seat or adjust the

pillows to obtain a proper seal.

•Are your headgear straps overtightened? Try not to alter the upper headgear

straps once they have been tightened by your clinician.

•If you cannot establish a comfortable seal, do not overtighten the headgear.

Consult your clinician.

•Try another nasal pillow size.

If you cannot resolve any problems, look at the Troubleshooting section, or talk

to your clinician.

Removing the Mask

To remove the Mirage Liberty:

1Detach the elbow by squeezing the elbow on both sides and pulling it away

from the frame (C-1).

2Unclip both of the lower headgear clips (C-2) and remove the mask.

Note: You can detach the elbow from the mask frame and leave the mask on

your face. You may prefer to do this when briefly stopping therapy, for

example to go to the bathroom.

Disassembling the Mask

See section C on the illustrations sheet.

1Unclip the upper headgear clips from the frame (C-3).

2Carefully pull the mouth cushion away from the frame (C-4).

3Push the two nasal pillows down through the mouth cushion (C-5).

4Remove the ports cap (C-6).

5Detach the inlet tube assembly from the elbow.

Note: The swivel does not need to be disconnected from the inlet tube.

6Detach the valve clip from the elbow (C-7).

7Peel the valve from the valve clip (C-8).

Note: Do not pull on the valve flap, as this may cause it to tear.

Cleaning the Mask in the Home

Notes:

•The mask and headgear can only be cleaned by handwashing.

•The headgear may be washed without removing the headgear clips.

618300 content.book Page 4 Wednesday, May 2, 2018 8:46 AM

English

WARNING

•Do not use aromatic-based solutions or scented oils (eg, eucalyptus or

essential oils), bleach, alcohol or products that smell strongly (eg,

citrus) to clean any of the mask components. Residual vapours from

these solutions can be inhaled if not rinsed thoroughly.They may also

damage the mask, causing cracks.

•Do not iron the headgear as the material is heat sensitive and will be

damaged.

Daily/After Each Use

To optimize the mask seal, facial oils should be removed from the cushion and

pillows before use.

Handwash the mask by gently rubbing in warm (86°F/30°C) water using mild

soap or diluted dishwashing detergent.

Clean the walls of the nasal pillows, including the space between the walls, of

any debris using a small brush.

Do not twist the valve during cleaning as this may damage or tear the valve

membrane or hinge. Take care when handling the valve.

If the vent requires cleaning use a soft bristle brush.

Rinse all components well with drinking quality water and allow them to air dry

out of direct sunlight. Do not soak the mask.

Weekly

Handwash the headgear in warm (approx. 86°F/30°C) water using mild soap or

diluted dishwashing detergent. Rinse the headgear well and allow it to air dry

out of direct sunlight.

Cleaning the Mask between Patients

The Mirage Liberty should be disinfected or sterilized when used between

patients. All components, except the headgear, are validated for up to 20

disinfection or sterilization cycles using one of the following processes:

•Thermal disinfection at a maximum temperature-time combination of 194°F

(90°C) for one minute

•Chemical disinfection (eg, Cidex™ OPA)

•The STERRAD™ Sterilization System (eg, 100S or NX).

The inlet tube and swivel should be replaced between patients.

The headgear should be thoroughly washed between patients, as described in

“Cleaning the Mask in the Home”.

Detailed disinfection and sterilization instructions are available from the

ResMed website, www.resmed.com/masks/sterilization/americas and must

be consulted before multipatient use.

618300 content.book Page 5 Wednesday, May 2, 2018 8:46 AM

Reassembling the Mask

See section D on the illustrations sheet.

Before reassembling the mask, check that all components are clean and dry.

Check that the valve is not damaged, distorted or torn, and that none of the

other components are broken or cracked. Replace any parts that are damaged.

Refer to “Ordering Information” for re-order numbers.

1Attach the nasal pillows to the mouth cushion:

aPush the nasal pillows through the holes in the mouth cushion (D-1).

bPull the nasal pillows up until the grooves at their base fully engage

around the mouth cushion holes (D-2).

cCheck that the tabs on each pillow fit into the corresponding notches on

the cushion (D-3). Check that the seal between the pillows and cushion

is complete.

2Attach the mouth cushion to the frame:

aPosition the cushion alignment guide between the two nasal pillows and

line up the triangle symbols on the bottom of the mask frame with

those on the mouth cushion.

bPress the mouth cushion into the groove in the frame (D-4).

cCheck that the mouth cushion is fully seated in the groove.

3Insert the ports cap (D-5).

4Clip the upper headgear clips onto the mask (D-6).

5Assemble the elbow assembly:

aPush the tab of the valve up through the slot in the valve clip (D-7).

Ensure that the valve locks into the slot.

bFeed the flap of the valve through the slot in the elbow (D-8).

cPress the valve clip onto the elbow until you hear both sides click into

place (D-9).

6Push the inlet tube assembly onto the elbow assembly.

Reassembling the Headgear

If taken apart, the headgear has five parts: headgear straps, left and right upper

headgear clips, and two lower clips.

1Attach the upper headgear clips to the mask frame (D-6). The mask

incorporates lock-out features to ensure that each upper clip attaches to the

correct side of the mask frame.

2Clip the lower headgear clips into the mask frame.

618300 content.book Page 6 Wednesday, May 2, 2018 8:46 AM

Andere Handbücher für Mirage Liberty

Inhaltsverzeichnis

Sprachen:

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed Astral Series Bedienungsanleitung

ResMed

ResMed VS III Bedienungsanleitung

ResMed

ResMed Astral Bedienungsanleitung

ResMed

ResMed AutoSet S9 Series Bedienungsanleitung

ResMed

ResMed H4i Bedienungsanleitung

ResMed

ResMed AirFit F20 Bedienungsanleitung

ResMed

ResMed Mirage FX Bedienungsanleitung

ResMed

ResMed S9 AutoSet Technisches Handbuch

ResMed

ResMed AIRCurve 10 Vauto Bedienungsanleitung

ResMed

ResMed airsense 10 autoset Leitfaden

ResMed

ResMed S7 Elite Bedienungsanleitung

ResMed

ResMed Mirage SoftGel Bedienungsanleitung

ResMed

ResMed AirFit N20 Bedienungsanleitung

ResMed

ResMed Astral Series Bedienungsanleitung

ResMed

ResMed Web-based Patient Monitor ResTraxx System Bedienungsanleitung

ResMed

ResMed Mirage Activa LT Bedienungsanleitung

ResMed

ResMed stellar series Bedienungsanleitung

ResMed

ResMed AirSense 10 Bedienungsanleitung

ResMed

ResMed S8 AutoSet Vantage Bedienungsanleitung

ResMed

ResMed stellar series Bedienungsanleitung

ResMed

ResMed VPAP ST Bedienungs- und Sicherheitshinweise

ResMed

ResMed AirFit F20 Bedienungsanleitung

ResMed

ResMed AirFit N30 Bedienungsanleitung

ResMed

ResMed Ultra Mirage II Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung