ResMed AIRMINI Bedienungsanleitung

User guide

English | 简体中文

ResMed.com/AirMiniApp

English 1

ENGLISH

Welcome

The AirMini™system combines ResMed’s AirMini self-adjusting

pressure machine, masks and the AirMini™ App (AirMini™ China App).

WARNING

Read this entire guide before using the machine.

Indications for use

Use with AirFit series masks and AirMini tubing and accessories. The

AirMini self-adjusting system is indicated for the treatment of

Obstructive Sleep Apnoea (OSA) in patients (female patients with mild

to moderate OSA when using AutoSet for Her treatment mode)

weighing more than 30 kg.

It is intended for home and hospital use.

Contraindications

Positive airway pressure therapy may be contraindicated in some

patients with the following pre-existing conditions:

•severe bullous lung disease

•pneumothorax

•pathologically low blood pressure

•dehydration

•cerebrospinal fluid leak, recent cranial surgery, or trauma.

Adverse effects

You should report unusual chest pain, severe headache, or increased

breathlessness to your prescribing physician. An acute upper respiratory

tract infection may require temporary discontinuation of treatment.

The following side effects may arise during the course of therapy with

the machine:

•drying of the nose, mouth, or throat

•nosebleed

•bloating

•ear or sinus discomfort

•eye irritation

•skin rashes.

At a glance

The AirMini system includes the following:

•AirMini: the AirMini machine, power supply unit, drawstring bag

and one of the following:

•AirMini setup pack - F20: AirMini tube, F20 connector for AirMini OR

•AirMini setup pack - N20: AirMini tube, N20 connector for AirMini,

HumidAirX™, HumidAirX Plus OR

•AirMini mask pack for P10: AirMini tube, AirFit™ P10 for AirMini

mask (M), P10 cushion (S), P10 cushion (L), HumidAirX, HumidAirX

Plus, AirFit P10 headgear clips.

English 3

Your AirMini system

Your AirMini system is comprised of the AirMini machine and one mask

pack or one setup pack.

A AirMini machine 6 20W power supply unit

B F20 connector for AirMini and AirMini

tube

7 F20 connector for AirMini

C N20 connector for AirMini and

AirMini tube

8 Vent

D AirFit P10 for AirMini and AirMini

tube

9 Vent module

1 Start/Stop button 10

Anti Asphyxia Valve (AAV)

2 Power inlet 11 N20 connector for AirMini

3 Air outlet 12 AirFit P10 for AirMini

4 Air filter cover 13 Heat moisture exchanger - HumidAirX

(blue) and HumidAirX Plus (gray)

5 Bluetooth®button 14 AirMini tube

Your machine is compatible with ResMed's F20 and N20 series masks

and with the AirFit P10 for AirMini. Make sure all parts and accessories

used with the machine are compatible. For compatibility information,

refer to www.resmed.com for more information.

Your AirMini machine is designed to work with ResMed’s AirMini app.

However, the AirMini app is not essential to operate the machine. For

more information on the AirMini app, refer to Using your machine with

the AirMini app or the AirMini app Patient eHelp.

HumidAirX and HumidAirX Plus

The HumidAirX and HumidAirX Plus are waterless humidifiers. These

are designed to provide more comfort by improving the moisture level

in the air you breathe and offering relief from possible dryness.

The HumidAirX is a good starting point for finding the right level of

humidification. The HumidAirX Plus will improve the humidity level

further and is useful when the ambient humidity level is very low (eg,

high altitudes, on an aircraft).

The HumidAirX and HumidAirX Plus can be used with the N20

connector for AirMini and AirFit P10 for AirMini only.

The HumidAirX and HumidAirX Plus must be replaced within 30 days of

opening the HumidAirX/HumidAirX Plus pack.

Setting up and starting therapy

Using your mask

Before you set up your machine, make sure you use a compatible mask.

For a full list of compatible masks for this device, see the Mask/Device

Compatibility List on www.resmed.com/downloads/masks. If you do

not have internet access, please contact your ResMed representative.

For information on fitting your mask, refer to the mask user guide.

Use your AirMini machine only as directed by your physician or

healthcare provider.

English 5

Set up your machine

1. Plug the power supply unit

into the machine and the

power outlet. The connector

has an angled edge so that

the power cord can only be

inserted into the machine

one way.

2. Connect the gray end of the

AirMini tubing firmly to the

air outlet.

Add optional humidification

(for N20 or AirFit P10 for

AirMini only)

To insert the HumidAirX or

HumidAirX Plus:

1. Open the connector by

gently twisting it.

2. Hold the

HumidAirX/HumidAirX Plus

at the sides, with the

colored side pointing down

and insert it.

3. Gently push together the

connector and twist until it

locks in place.

Connect your mask

1. Fit your mask as instructed in the mask user guide.

2. Attach the connector to your mask.

F20 Series N20 Series AirFit P10 for AirMini

Start therapy

1. Start therapy by pressing

the Start/Stop button or

breathe normally if

SmartStart™ is enabled.

Stop therapy

1. Remove your mask.

2. Press the Start/Stop button or wait until the machine stops if

SmartStop is activated.

English 7

Comfort features

Ramp Time, Pressure Relief and SmartStart are enabled on your

machine.

Ramp Time

Designed to make the beginning of therapy more comfortable, Ramp

Time is the period during which pressure gradually increases from a

lower start pressure to the prescribed treatment pressure.

Pressure Relief

When Pressure Relief is enabled and turned on, you may find it easier

to breathe out. This can help you get used to therapy.

Note: Pressure Relief must first be enabled by your provider.

SmartStart

When SmartStart is turned on, therapy starts automatically when you

breathe into your mask.

SmartStop

When SmartStop is turned on, therapy stops automatically after a few

seconds when you remove your mask.

Changing comfort features

Your AirMini machine has been set up for your needs by your provider,

but you may find that you want to make small adjustments to comfort

settings to make your therapy more comfortable.

For more information about comfort settings, or for information on

changing these settings, refer to the AirMini app Patient eHelp.

Using your machine with the AirMini app

Your AirMini machine can be used with ResMed’s AirMini app. Once

you have paired and connected your machine to your smart device via

Bluetooth, you can start and stop therapy, change comfort settings and

view your therapy data via the AirMini app. Data sent via Bluetooth is

encrypted to protect your privacy.

Connecting your machine and smart device

Before you start, ensure that the latest version of the AirMini app is

installed on your smart device. If not, download the app from the App

StoreSM.

1. Ensure your machine is set up correctly and plugged into a power

source.

2. On your smart device, enable Bluetooth.

3. Open the AirMini app.

The first time you open the AirMini app you will be asked to consent

to the use of cookies and to accept ResMed's Terms and Conditions

and Privacy Policy.

4. Check the boxes on the Welcome screen and then tap Continue.

5. On your machine, press the Bluetooth button when prompted

by the AirMini app.

When the light starts to flash blue , Bluetooth is enabled and your

machine is ready to connect.

6. On your smart device, tap Connect.

When your machine is discovered, the machine name appears in the

machine selection list.

7. Select the machine name from the list to connect.

8. The first time you pair your machine with your smart device, you will

need to perform the authentication procedure.

When prompted by the AirMini app, authenticate by entering the

four-digit key located on the back of your machine.

Andere Handbücher für AIRMINI

Inhaltsverzeichnis

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed ResScan Bedienungsanleitung

ResMed

ResMed AirFit F30i Bedienungsanleitung

ResMed

ResMed Lumis 100 VPAP ST Bedienungsanleitung

ResMed

ResMed S9 Elite Bedienungsanleitung

ResMed

ResMed AirFit N20 Classic Bedienungsanleitung

ResMed

ResMed Mirage FX Bedienungsanleitung

ResMed

ResMed VPAP Auto Bedienungsanleitung

ResMed

ResMed 61106 Bedienungsanleitung

ResMed

ResMed S8 Series Bedienungsanleitung

ResMed

ResMed Lumis 100 VPAP S Bedienungsanleitung

ResMed

ResMed AirSense 11 Bedienungsanleitung

ResMed

ResMed Mirage SoftGel Bedienungsanleitung

ResMed

ResMed AIRCurve 10 S Bedienungsanleitung

ResMed

ResMed VPAP ST Technisches Handbuch

ResMed

ResMed Lumis HFT Bedienungsanleitung

ResMed

ResMed AirSense 11 Bedienungsanleitung

ResMed

ResMed S8 AutoSet Spirit II Bedienungsanleitung

ResMed

ResMed Swift FX Bedienungsanleitung

ResMed

ResMed ELITE S8 Bedienungsanleitung

ResMed

ResMed Nox A1 Betriebsanleitung

ResMed

ResMed Ultra Mirage Bedienungsanleitung

ResMed

ResMed S8 Compact System Bedienungsanleitung

ResMed

ResMed VPAP ST Technisches Handbuch

ResMed

ResMed VPAP ST Bedienungs- und Sicherheitshinweise

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung