ResMed ClimateLineAir 11 Bedienungsanleitung

User guide

English

English 1

ENGLISH

About the ClimateLineAir 11

CAUTION

In the US, Federal law restricts this device to sale by or on the order

of a physician.

The ClimateLineAir ™ 11 is a heated breathing tube that delivers air to a

compatible mask. When used with the device humidifier, ClimateLineAir

heated air tubing allows you to use the Climate Control feature.

Please read this entire user guide together with your device user guide

before using your ClimateLineAir 11 heated air tubing.

Note: Only use the ClimateLineAir 11 with compatible devices.

Setting up

To set up the device and tubing:

1. Make sure the device is connected and turned on.

2. Hold the cuff of the heated air tubing and line up the heated air

tubing with the outlet connector at the rear of the device.

3. Push the cuff firmly into place. ClimateLine connected will briefly

display on the device screen.

4. Connect the assembled mask to the free end of the heated air

tubing.

Note: The electrical connector end of the heated air tubing is only

compatible with the air outlet at the device end and should not be fitted

to the mask.

English 3

Device Settings

Climate Control

Climate Control is designed to make therapy more comfortable by

enabling constant temperature and maintaining humidity.

This feature:

•delivers comfortable humidity level and temperature during therapy.

•maintains the set temperature and relative humidity during sleep to

prevent dryness in the mouth

•can be set to either Auto or Manual

•is only available when both the ClimateLineAir and HumidAir™ tub

are attached.

Climate Control - Auto setting

Auto is the recommended and default setting. It is designed to make

therapy as easy as possible so there is no need to change the

temperature or humidity settings.

•Sets the tube temperature to Auto (80ºF/27ºC). If the air in the mask

is too warm or too cold, you can adjust the tube temperature to

anywhere from 60 to 86ºF (16 to 30ºC) or turn it off completely

•Adjusts the humidifier output to maintain a constant, comfortable

humidity level of 85% relative humidity

•Protects against rainout (water droplets in the heated air tubing and

mask).

Climate Control - Manual setting

Manual is designed to offer more flexibility and control over settings

and offers the following:

•Temperature and humidity can be adjusted to find the most

comfortable setting

•Temperature and humidity level can be set independently

•Rainout protection is not guaranteed. If rainout does occur, first try

increasing the tube temperature

•If the air temperature becomes too warm and rainout continues, try

decreasing the humidity.

Note: If Climate Control is set to Manual, the Auto Tube Temperature

setting is not available.

Humidity Level

The humidifier moistens the air and is designed to make therapy more

comfortable.

•If you are getting a dry nose or mouth, turn up the humidity

•If you are getting any moisture in your mask, turn down the

humidity.

•You can set the Humidity Level to Off or between 1 and 8, where 1

is the lowest humidity setting, and 8 is the highest humidity setting.

To update the settings for Tube Temperature, Climate Control, or

Humidity Level, tap MY OPTIONS from the Home screen, go down the

list of options, and select the setting. Refer to your device user guide

for more information on how to update the device settings.

English 5

Cleaning and caring for your tubing

WARNING

•Clean the device and its components according to the schedules

shown in this guide, to maintain the quality of the device and to

prevent the growth of germs that can adversely affect your

health.

•If any visible deterioration of a system component is apparent

(cracking, discoloration, tears etc.), the component should be

discarded and replaced.

CAUTION

•Do not use bleach, chlorine, alcohol, or aromatic-based

solutions, moisturizing or antibacterial soaps or scented oils to

clean the device, the humidifier or air tubing. These solutions

may cause damage or affect the humidifier performance and

reduce the life of the products. Exposure to smoke, including

cigarette, cigar or pipe smoke, as well as ozone or other gases,

may damage the device. Damage caused by any of the

foregoing, will not be covered by ResMed's limited warranty.

Disconnecting

1. Pinch the cuff of the air tubing, and gently pull it away from the

device.

2. Hold both the cuff of the air tubing and the swivel of the mask, then

gently pull apart.

Note: Only hold and pull the cuff of the air tubing. Do not hold or pull

the tubing itself as it may cause damage.

Cleaning

The following instructions are for home cleaning. Instructions for

reprocessing tubing intended for multi-patient re-use can be found in

the clinical guide.

You should clean the air tubing weekly as described.

1. Wash the air tubing in warm water using a household dishwashing

liquid. It should not be washed in temperatures higher than 149ºF

(65ºC). Do not wash in a dishwasher or washing machine.

2. Rinse the air tubing thoroughly in water.

3. Allow to dry out of direct sunlight and/or heat.

Checking

You should regularly check the air tubing for any damage. If there are

any holes, tears, or cracks, you should replace it.

Reassembly

When the air tubing is dry, you can reconnect it to the device.

1. Connect the air tubing firmly to the air outlet located on the rear of

the device.

2. Connect the free end of the air tubing firmly onto the assembled

mask.

Troubleshooting

If you have any problems, refer to the troubleshooting section of your

device user guide or www.resmed.com.

For any serious incidents that occur in relation to this device, these

should be reported to ResMed and the competent authority in your

country.

English 7

Technical specifications

Environmental conditions

Operating temperature: +41°F to +95°F (+5°C to +35°C)

Operating humidity:

10 to 95% relative humidity, non-

condensing

Operating altitude: Sea level to 9,870' (3,010 m); air pressure

range 700 hPa to 1060 hPa;

Storage and transport temperature:

-13°F to +158°F (-25°C to +70°C)

Storage and transport humidity: 5 to 95% relative humidity, non-

condensing

Design life

Air tubing: 6 months

Maximum working pressure of heated air

tubing:

25 cmH2O

Maximum working temperature of heated

air tubing:

+60ºF to 86ºF (16ºC to 30ºC)

Air tubing dimensions

Air tubing

Material

Length

Inner-

diameter

ClimateLineAir 11

Flexible plastic and electrical

components

6'6" (2 m)

0.6" (15

mm)

Heated air tubing temperature cut-out: +106ºF (41ºC)

Note:

•The manufacturer reserves the right to change these specifications without notice.

Resistance to flow

The table illustrates the resistance to flow of the air tubing:

Air tubing At flow (L/min) with

pressure of 20 cm H2O

Resistance to flow (cm

H2O/l/min)

Air tubing only

ClimateLineAir

0.0100

15 0.0077

Compliance

The table illustrates the compliance of the air tubing:

Air tubing Compliance (cm H2O/L/min) with pressure of 60 cm H2O

Air tubing only

ClimateLineAir 11

0.500

Symbols

Temperature limitation. Humidity limitation. Operating

altitude. Atmospheric pressure limitation. Manufacturer.

See symbols glossary at ResMed.com/symbols.

Environmental information

This device should be disposed of separately, not as unsorted municipal

waste. To dispose of your device, you should use appropriate collection,

reuse and recycling systems available in your region. The use of these

collection, reuse and recycling systems is designed to reduce pressure

on natural resources and prevent hazardous substances from damaging

the environment.

If you need information on these disposal systems, please contact your

local waste administration. The crossed-bin symbol invites you to use

these disposal systems. If you require information on collection and

disposal of your ResMed device please contact your ResMed office,

local distributor or go to ResMed.com/environment.

English 9

Limited warranty

ResMed Pty Ltd (hereafter 'ResMed') warrants that your ResMed

product shall be free from defects in material and workmanship from

the date of purchase for the period specified below.

Product Warranty period

•Mask systems (including mask frame, cushion, headgear

and tubing)—excluding single-use devices

•Accessories—excluding single-use devices

•Flex-type finger pulse sensors

•Humidifier water tubs

90 days

•

Batteries for use in ResMed internal and external battery

systems

6 months

•Clip-type finger pulse sensors

•CPAP and bilevel device data modules

•Oximeters and CPAP and bilevel device oximeter adapters

•Humidifiers and humidifier cleanable water tubs

•Titration control devices

1 year

•CPAP, bilevel and ventilation devices (including external

power supply units)

•Battery accessories

•Portable diagnostic/screening devices

2 years

This warranty is only available to the initial consumer. It is not

transferable.

During the warranty period, if the product fails under conditions of

normal use, ResMed will repair or replace, at its option, the defective

product or any of its components.

This limited warranty does not cover: a) any damage caused as a result

of improper use, abuse, modification or alteration of the product; b)

repairs carried out by any service organization that has not been

expressly authorized by ResMed to perform such repairs; c) any

damage or contamination due to cigarette, pipe, cigar or other smoke;

Andere Handbücher für ClimateLineAir 11

Inhaltsverzeichnis

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed HumidAire 3i Bedienungsanleitung

ResMed

ResMed AIRMINI Bedienungsanleitung

ResMed

ResMed stellar series Bedienungsanleitung

ResMed

ResMed 61106 Bedienungsanleitung

ResMed

ResMed ELITE S8 Bedienungsanleitung

ResMed

ResMed AIRMINI Bedienungsanleitung

ResMed

ResMed Mirage Micro Bedienungsanleitung

ResMed

ResMed Flow Generator AutoSet CS 2 Bedienungsanleitung

ResMed

ResMed airsense 10 autoset Bedienungsanleitung

ResMed

ResMed AIRMINI Bedienungsanleitung

ResMed

ResMed Swift FX Bedienungsanleitung

ResMed

ResMed airsense 10 autoset Leitfaden

ResMed

ResMed Astral 100 Bedienungsanleitung

ResMed

ResMed ApneaLink Bedienungsanleitung

ResMed

ResMed AirFit F20 Bedienungsanleitung

ResMed

ResMed airsense 10 autoset Bedienungsanleitung

ResMed

ResMed AirFit N30i Bedienungsanleitung

ResMed

ResMed Stellar 100 Bedienungsanleitung

ResMed

ResMed Mirage SoftGel Bedienungsanleitung

ResMed

ResMed AirSense 10 Leitfaden

ResMed

ResMed AcuCare HFNC Bedienungsanleitung

ResMed

ResMed AirFit P10 Bedienungsanleitung

ResMed

ResMed AirSense 10 Bedienungsanleitung

ResMed

ResMed AirSense 11 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung