ResMed S8 AutoSet Spirit II Bedienungsanleitung

S8 AutoSet Spirit™ II System

Clinical Quick Setup Guide

Setup is quick and easy . . . Just Go!

The following settings have been pre-set to accommodate typical patient treatment values.

CPAP mode AutoSet mode

Start CPAP: 6 cm H2O Min Press: 4 cm H2O

CPAP: 10 cm H2O Max Press: 20 cm H2O

Ramp: 20 minutes Settling: 20 minutes

Max Ramp: 30 minutes Max Settling: 30 minutes

Humid: None Humid: None

SmartStart: Off SmartStart: Off

Reminders: Off Reminders: Off

Mask: Ultra Mask: Ultra

Leak Alert: Off Leak Alert: Off

Tube Length: 2 m Tube Length: 2 m

Language: English Language: English

Smart Data: On Smart Data: On

Auto Appear: On Auto Appear: On

Patient Menu: Std Patient Menu: Std

EPR: Off EPR: Off

EPR Level: 0 EPR Level: 0

EPR Inhale: Med EPR Access: Off

EPR Access: Off

Important: Remove this guide before

handing the device to the patient.

Pressures should only be adjusted by

qualiﬁed personnel.

See the Clinical Guide for full details.

Accessing the clinical menu

Turn on the device and wait until the standby (RAMP/SETTLING) screen appears on•

the LCD. At this stage you can adjust the ramp/settling time.

Press• and simultaneously for three seconds to access the clinical menu.

Changing options and settings

Press• to access the SETTINGS menu screen.

Use• and to scroll through the RESULTS, OPTIONS and SERVICING

menu screens.

From a menu screen, use• to access the parameters in that menu.

Use• and to scroll through menu parameters.

Use• to view or change each parameter setting as required.

Press• until you return to the standby (RAMP/SETTLING) screen.

Accessing the quickview menu

Press• and simultaneously for three seconds to access the quickview

menu.

S8 AutoSet Spirit II clinical menus

CPAP

MODE AUTOSET

MODE

RAMP: 10 min

menu SETTLING: 10 min

SERVICING

enter exit

OPTIONS

enter exit

CLINICAL MENU

CLINICAL

menu exit

WELCOME

RESULTS

enter exit

SETTINGS

enter exit

BR: 19200

change exit

RUN HRS: 8888

exit

SN:12345678912

exit

PCB: 123456789123

4567 exit

SW: SX4800100

exit

Settings Menu:

screens

Options Menu:

screens

S8 AutoSet Spirit II clinical menus

Settings Menu: screens

AUTOSET MODECPAP MODE

SETTINGS

enter exit

MODE: CPAP

change exit

START CPAP: 4.0

change exit

TUBE LENGTH: 2m

change exit

HUMID: NONE

MAX RAMP: 30

change exit

MASK: ULTRA

change exit

CPAP: 10.0

change exit

SMARTSTART: ON

change exit

EPR: RAMP ONLY

change exit

EPR LEVEL: 1

change exit

EPR INHALE: MED

change exit

LEAK ALERT: OFF

change exit

MODE: AUTOSET

change exit

MIN PRESS: 7.0

change exit

MAX PRESS: 20

change exit

TUBE LENGTH: 2m

change exit

LEAK ALERT: OFF

change exit

MAX SETTLING: 30

change exit

MASK: ULTRA

change exit

HUMID: NONE

SMARTSTART: ON

change exit

EPR ACCESS: OFF

change exit

EPR: SETTLE ONLY

change exit

EPR LEVEL: 1

change exit

EPR ACCESS: OFF

change exit

Options Menu: screens

S8 AutoSet Spirit II clinical menus

Note: For each reminder, you can set a time period for that reminder to keep re-occurring.

For these recurring reminders to work, you must set the date for the ﬁrst occurrence of the

reminder as well as a recurrence time period.

For example, if you set MASK: 30Jun2008 and MASK RECUR: 6mth, the ﬁrst reminder to

replace the mask is displayed on 30 June 2008. The recurring reminder occurs

6 months from the date the reminder is acknowledged by the patient. The reminder will

continue to recur at 6-month intervals unless it is set to OFF or the recurrence period is

changed.

OPTIONS

enter



exit

SMART DATA

enter



exit

MASK FIT: ON

change



exit

REMINDERS

enter



exit

FACTORY DEFAULTS

reset



exit

ERASE DATA?

yes



exit

DATE: 20 Dec 2006

change



exit

TIME: 15:54

change



exit

MENU TYPE: ADV

change



exit

LANG:ENGLISH

change



exit

PRESSURE: ON

change



exit

USAGE: ON

change



exit

AUTO APPEAR: ON

change



exit

MASK: 16Feb2007

change



exit

MASK RECUR: 6mth

change



exit

CALL RECUR: OFF

change



exit

CARD RECUR: OFF

change



exit

FILT RECUR: 6mth

change



exit

SERV RECUR:24mth

change



exit

CUST RECUR: OFF

change



exit

CALL: 16Feb2007

change



exit

CARD: 16Feb2007

change



exit

FILT: 16Feb2007

change



exit

SERV: 16Feb2007

change



exit

CUST: OFF

change



exit

S8 AutoSet Spirit II quickview menu

...

MODE: CPAP

exit

START CPAP: 4.0

exit

CPAP: 10.0

exit

MAX RAMP: 30

exit

MASK: ULTRA

exit

TUBE LENGTH: 2m

exit

HUMID: NONE

exit

SMARTSTART: ON

exit

LEAK ALERT: OFF

exit

EPR: RAMP ONLY

exit

EPR LEVEL: OFF

exit

EPR INHALE: MED

exit

LEAK: 0.70 L/s

day... exit

AHI: 4

day... exit

AI: 3

day... exit

LEAK: NO DATA

yr... exit

AHI: NO DATA

yr... exit

AI: NO DATA

yr... exit

USAGE: 1000/1068

exit

USAGE: 7.45 hrs

days... exit

PRESS: 10.2

day... exit PRESS: NO DATA

yr... exit

USED HRS: 0800

exit

EPR ACCESS: OFF

exit

HI: 2

day... exit HI: NO DATA

yr... exit

RUN HRS: 00000

exit

USAGE: 7.2 hrs

yr... exit

REVIEW

enter exit SETTINGS

enter exit

RESULTS

enter exit

USAGE DATA

enter exit

EFFICACY DATA

enter exit

AUTOSET MODECPAP MODE

MODE: AUTOSET

exit

MIN PRESS: 4.0

exit

MAX PRESS: 20

exit

MAX SETTLING: 30

exit

MASK: ULTRA

exit

TUBE LENGTH: 2m

exit

HUMID: NONE

exit

SMARTSTART: ON

exit

LEAK ALERT: OFF

exit

EPR: SETTLE ONLY

exit

EPR LEVEL: OFF

exit

EPR ACCESS: OFF

exit

This screen only appears if access is set by clinician.

S8 AutoSet Spirit II patient menus

Detailed menus

RAMP: 10min

WELCOME

>>>>>>

SETTINGS

enter exit

SETTLING: 10min

WELCOME

>>>>>>

EPR LEVEL: 1

change exit

CPAP AUTOSET

MASK: ULTRA

change exit

AUTOSETCPAP

USED HRS: 08000

exit

USAGE: 1000/1068

exit

RESULTS

enter exit

SERVICING

enter exit

OPTIONS

enter exit

LANG: ENGLISH

change exit

SN: 12345678912

exit

PCB: 123456789123

4567 exit

SW: SX4800100

exit

TUBE LENGTH: 2m

change exit

HUMID: NONE

change exit

SMARTSTART: ON

change exit

LEAK ALERT: OFF

change exit

SMART DATA

enter exit

SMART DATA

enter exit

AUTO APPEAR: OFF

change cancel

TUBE LENGTH: 2m

change exit

HUMID: NONE

change exit

SMARTSTART: ON

change exit

LEAK ALERT: OFF

change exit

MASK: ULTRA

change exit

EPR LEVEL: 1

change exit

Global leaders in sleep and respiratory medicine www.resmed.com

S8 AutoSet Spirit II patient menus

Standard menus

This screen only appears if access is set by clinician.

RAMP: 10min

WELCOME

>>>>>>

SETTLING: 10min

CPAP

WELCOME

>>>>>>

AUTOSET

MASK: ULTRA

change exit

SW: SX4800100

exit

USED HRS: 08000

exit

USAGE: 1000/1068

exit

MASK: ULTRA

change exit

SW: SX4800100

exit

USED HRS: 08000

exit

USAGE: 1000/1068

exit

EPR LEVEL: 1

change exit

EPR LEVEL: 1

change exit

ResMed Ltd(Manufacturer)1ElizabethMacarthurDriveBellaVistaNSW2153Australia•ResMedCorp(USDesignatedAgent)14040

DanielsonStreetPowayCA92064-6857USA•ResMed (UK) Ltd (EU Authorised Representative) 96 Milton Park Abingdon Oxfordshire

OX144RYUK•ResMed Ofﬁces Australia, Austria, Belgium, Brazil, China, Finland, France, Germany, Greece, Hong Kong, India, Ireland,

Italy, Japan, Malaysia, Mexico, Netherlands, New Zealand, Norway, Portugal, Singapore, South Africa, Spain, Sweden, Switzerland, UK, USA

(see www.resmed.com for contact details).

Protected by patents: AU 691200, AU 697652, AU 709279, AU 724589, AU 730844, AU 736723, AU 750095, AU 750761, AU 764761, AU

779327, AU 2002231456, CN 02804930.6, EP 0651971, EP 0661071, EP 0920845, EP 0934723, EP 1028769, EP 1126893, EP 1502618,

EP 1144036, JP 3580776, JP 3778797, NZ 504595, US 5199424, US 5245995, US 5522382, US 5704345, US 6138675, US 6240921, US

6363933, US 6367474, US 6425395, US 6502572, US 6591834, US 6705315, US 6745768, US 6817361, US 6988498, US 7040317, US

7100608. Other patents pending.

Protected by design registrations: AU 302180, AU 302181, AU 302182, AU 302183, AU 302184, AU 302185, AU 302186, CN

200430121212.2, CN 200430121213.7, CN 200430121211.8, CN 200430121214.1, CN 200430121215.6, CN 200430121216.0, CN

200430121217.5, EU 269436, EU 815071, HK 0412901.9, JP 1257662, JP 1257663, JP 1266956, JP 1266957, JP 1267270, JP 1267271, NZ

405614, NZ 406923, NZ 406924, NZ 406925, NZ 406926, NZ 406927, NZ 406928, US D544598, US D553228, US D557406, US D557407, US

D560795, US D561891, US D565160. Others pending.

S8 AutoSet Spirit and SmartStart are trademarks of ResMed Ltd and AutoSet is registered in U.S. Patent and Trademark Ofﬁce.

Andere Handbücher für S8 AutoSet Spirit II

Inhaltsverzeichnis

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed AIRMINI Bedienungsanleitung

ResMed

ResMed AirSense 10 Bedienungsanleitung

ResMed

ResMed ApneaLink Bedienungsanleitung

ResMed

ResMed S9 AutoSet Technisches Handbuch

ResMed

ResMed AirFit N30i Bedienungsanleitung

ResMed

ResMed Mirage FX Bedienungsanleitung

ResMed

ResMed AirFit F30 Bedienungsanleitung

ResMed

ResMed Mirage Activa LT Bedienungsanleitung

ResMed

ResMed Astral 150 Bedienungsanleitung

ResMed

ResMed Tubing Wrap STANDARD Bedienungsanleitung

ResMed

ResMed H5i Bedienungsanleitung

ResMed

ResMed S9 VPAP Series Bedienungsanleitung

ResMed

ResMed Narval CC Bedienungsanleitung

ResMed

ResMed AcuCare HFNC Bedienungsanleitung

ResMed

ResMed HumidAire 3i Bedienungsanleitung

ResMed

ResMed Elisee 150 Bedienungsanleitung

ResMed

ResMed AirFit N30i Bedienungsanleitung

ResMed

ResMed stellar series Bedienungsanleitung

ResMed

ResMed Swift FX Bedienungsanleitung

ResMed

ResMed VPAP IV ST Betriebsanleitung

ResMed

ResMed ELITE S8 Bedienungsanleitung

ResMed

ResMed AirStart 10 APAP Bedienungsanleitung

ResMed

ResMed AirFit F10 Bedienungsanleitung

ResMed

ResMed AIRMINI Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung