ResMed Astral 150 Bedienungsanleitung

Quick setup guide

English

278074 Astral QSG ROW Eng Ref.indd 1 31/03/2014 12:58:33 PM

278074 Astral QSG ROW Eng Ref.indd 2 31/03/2014 12:58:33 PM

The Astral device

1. Adapter port

Can be ﬁtted with single

limb adapter, single limb leak

adapter or double limb adapter

(Astral 150 only)

2. Handle

3. Inspiratory port (to patient)

4. Ethernet connector

(service use only)

5. USB connector

(for download to ResScan)

6. Mini USB connector

(service use only)

7. DC power inlet

8. Device on/off push button

9. SpO2 Sensor connector

10. Remote alarm ﬁve pin

connector

11. Low ﬂow oxygen input

(up to 30L/min)

12. Air inlet

(complete with hypoallergenic

ﬁlter)

4 5 6 7 8

9101112

278074 Astral QSG ROW Eng Ref.indd 1 31/03/2014 12:58:39 PM

The Astral device interface

5 4 3

121. Touch screen

2. Power source indicators

AC (mains power

supply)

DC (external battery or

car accessory adapter)

Internal battery

3. Therapy on/off indicator

Device ready

Constant green display

when the device is

turned on but not

ventilating.

Device ventilating

Flashes blue when the

device is ventilating

and the Ventilation

LED setting is ‘ON’.

Otherwise is ‘OFF’

4. Alarm mute/reset button

Illuminates when an alarm is

triggered and ﬂashes when the

sound is muted.

5. Alarm bar

Touch screen

1 2 3 4 5

789

1. Clinical mode access button

Locked Unlocked

2. Manual breath

button only shown if enabled

3. Information bar

4. Internal battery indicator

5. Lock touch screen button

6. Menu bar

7. Bottom bar

8. Start ventilation

button

Stop ventilation

button

9. Main screen

10. Sub menus

11. Pressure bar

278074 Astral QSG ROW Eng Ref.indd 2 31/03/2014 12:58:44 PM

Patient circuits

The Astral device supports single and double limb circuits with the use of interchangeable circuit adapters.

Breathing circuits may be of 10, 15 or 22 mm diameter.

There are three circuit adapters:

Adapter For use with

1. Single limb

leak

Single limb circuit with

intentional leak

2. Single limb

Single limb circuit with

expiratory valve (expiratory

valve integrated into the

circuit)

3. Double limb

(Astral 150

only)

Double limb circuit

(expiratory valve integrated

into the adapter) OR single

limb circuit with intentional

leak

Fitting the circuit adapter

Before connecting the patient circuit, the adapter speciﬁc to the required circuit type must be ﬁtted.

To ﬁt the adapter:

1. Turn over the device and place on a soft surface

(to protect the LCD screen).

2. Press and hold the eject button. Pull the cover out

towards you.

3. Lift the adapter out of the socket.

4. Replace with the new adapter, ensuring it sits

ﬁrmly in the socket.

5. Place the cover over the enclosure, ensuring the

runners on the device and the cover are aligned.

Slide the cover back into place until the latch

clicks.

278074 Astral QSG ROW Eng Ref.indd 3 31/03/2014 12:59:00 PM

Setting up the circuit

For complete details on setting up the circuit see Assembling patient circuits in the Astral Clinical Guide.

Single limb circuit with intentional leak Single limb circuit with expiratory valve using

ResMed proprietary circuit

Single limb circuit with expiratory valve using

standard circuit

Double limb circuit (Astral 150 only)

To patient

Performing a Learn Circuit

Do not connect patient interfaces prior to performing

the Learn Circuit.

1. From the Setup menu, select the Circuit sub

menu.

2. Press Start and follow the on-screen prompts.

A test result screen is displayed if any of the tests

fail, otherwise the Learn Circuit function has been

successfully completed and you will be returned to

the main settings page.

278074 Astral QSG ROW Eng Ref.indd 4 31/03/2014 12:59:20 PM

Powering on the device

To power on the device, simply press the

green power on/off switch at the back

of the device. The device will perform a

system check.

On completion of the system check, the

Patient Home screen and active program is

displayed.

If more than one program displays, the

active program will be highlighted orange.

Note: Settings conﬁgured in the active

program will be used when ventilation is

started.

Accessing Clinical mode

To access Clinical mode:

Clinical mode can be accessed from any

screen, whether or not the Astral device is

ventilating.

1. From the patient home screen, press

and hold for 3 seconds.

2. Select 20 minutes or Unlimited.

The padlock is unlocked and the Main

Settings screen is displayed.

To exit Clinical mode:

1. Press . The Exit Clinical Mode

screen is displayed.

2. Press Conﬁrm. The padlock is locked and

the Patient Home screen is displayed.

Note: If you do not make a selection

within 7 seconds, the device returns to the

previous screen.

278074 Astral QSG ROW Eng Ref.indd 5 31/03/2014 12:59:24 PM

Using the Setup assistant

To quickly set up the Astral device and start

ventilation for a new patient, use the Setup

assistant.

1. Access Clinical mode.

2. From the Menu bar, press .

3. Select SetupAssistant and press Start.

4. A warning message will display. Select

Continue.

5. Select the patient type to automatically

conﬁgure alarm and setting ranges.

6. Select the circuit type to be connected.

7. Select Start to run the Learn Circuit.

8. Follow the on-screen prompts to attach

and test the circuit.

9. Select your required ventilation mode.

The default settings for the mode are

displayed

10. Review and adjust the settings as

required.

11. Press to start ventilation.

For further information on adjusting

setting parameters and alarm settings, see

Adjusting patient settings and Adjusting

alarm settings in the Astral Clinical Guide.

278074 Astral QSG ROW Eng Ref.indd 6 31/03/2014 12:59:26 PM

Navigating the menus

Monitors

Waveforms The Waveforms screen

displays the last 15 seconds

of patient airway pressure

and ﬂow in a graph. The

graph updates in real-time.

Monitoring The Monitoring screen

displays all measured

parameters in numerical

form.

Trends

Setup

Programs*

Setup

Assistant*

Circuit

Settings Main Settings

Manual Breath

Data

Transfer

Transfer Data

Import / Export

Device

Conﬁg.

Display

Date / Time

Units / Option

Reset

Alarms

Alarms 1 Tidal Volume (Vt)

Minute Ventilation (Mv)

Respiratory Rate

Pressure

Low PEEP

Alarms 2 Ventilation Stop

Leak

Non-vented Mask (NV Mask)

Alarms 3 FiO2

SpO2

Pulse

Apnoea

Response

Apnoea Response

Apnoea Deﬁnition

Alarm

Volume

Alarm Level

Alarm Test

Information

Events Alarms

Settings

System

Device Information

*Available in Clinical mode only

278074 Astral QSG ROW Eng Ref.indd 7 31/03/2014 12:59:27 PM

Alarms

When an alarm is activated, the Astral device provides both audible and visual alerts, and displays an alarm

message in the Alarm display on the Information bar.

5 3

Alarm priority Alarm bar Audible alert

High Red ﬂashing light 10 beeps every

5 seconds

Medium Yellow ﬂashing

light

3 beeps every

15 seconds

Low Yellow steady 2 beeps every

25 seconds

Indicator Description

1. Alarm

display

Displays either the alarm

message for the highest

priority active alarm, or the last

alarm not yet reset.

Press the Alarm display for

further alarm information.

Certain conditions may

result in multiple alarms.

indicates that there are

multiple active alarms.

Press when displayed

to view all active alarms and

respond appropriately. Alarms

are displayed in order of

priority.

2. Active

Alarms

screen

Displays the full set of active

alarms. Will automatically

display upon activation of an

alarm in patient mode.

3. Information

Some alarms clear

automatically. To view a history

of alarms, view the alarm log

through the Information menu.

4. Alarm

mute/reset

button

State:

• no light – no active alarms

• steady light – active alarm/s

• ﬂashing light – alarm mute

on.

This button also allows you to:

• mute the audible alert

• reset the currently displayed

alarm (if permitted).

5. Alarm bar Indicates the priority of the

alarm in the Alarm display.

278074 Astral QSG ROW Eng Ref.indd 8 31/03/2014 12:59:31 PM

Andere Handbücher für Astral 150

Inhaltsverzeichnis

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed Tubing Wrap Bedienungsanleitung

ResMed

ResMed AirSense 11 Bedienungsanleitung

ResMed

ResMed Swift FX Bedienungsanleitung

ResMed

ResMed Swift FX Bella Bedienungsanleitung

ResMed

ResMed AIRMINI Bedienungsanleitung

ResMed

ResMed Ultra Mirage Bedienungsanleitung

ResMed

ResMed Swift FX Nano Bedienungsanleitung

ResMed

ResMed Swift FX Bella Gray Bedienungsanleitung

ResMed

ResMed S9 VPAP Series Bedienungsanleitung

ResMed

ResMed Astral Mobility bag Bedienungsanleitung

ResMed

ResMed Ultra Mirage Bedienungsanleitung

ResMed

ResMed ClimateLineAir 11 Bedienungsanleitung

ResMed

ResMed AirFit P10 Bedienungsanleitung

ResMed

ResMed S8 Series Bedienungsanleitung

ResMed

ResMed AirSense 10 Bedienungsanleitung

ResMed

ResMed Tx Link Bedienungsanleitung

ResMed

ResMed Mirage Swift Bedienungsanleitung

ResMed

ResMed AirFit P10 Bedienungsanleitung

ResMed

ResMed stellar series Bedienungsanleitung

ResMed

ResMed AirFit N30 Bedienungsanleitung

ResMed

ResMed airsense 10 autoset Leitfaden

ResMed

ResMed AirFit P10 Bedienungsanleitung

ResMed

ResMed AcuCare HFNC Bedienungsanleitung

ResMed

ResMed AirSense 11 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung