Robe PixelPATT Bedienungsanleitung

Version 1.2

Table of contents

1. Safety instructions ......................................................................................................... 3

2. Description of the xture .............................................................................................. 4

3. Installation....................................................................................................................... 4

3.1 Mounting the pixelPATT ............................................................................................ 4

3.2 Connecting the pixelPATT with the PATT Driver ........................................................ 4

4. Technical specications ................................................................................................ 6

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE INSTALLING THE PRODUCT .

1. Safety instructions

CAUTION!

The PixelPATT was designed for indoor use only.

The product is for professional use only, it is not for household use.

This product has left our premises in absolutely perfect condition. In order to maintain this condition and to

ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning

notes written in this manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this

manual or any unauthorized modication to the product.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on

immediately. The arising condensation water might damage your device. Leave the device switched o󰀨 until

it has reached room temperature.

The pixel PATT should be operated with the PATT Driver only.

The PixelPATT becomes hot during its operation, a

llow it to cool prior

to manipulation.

The pixelPATT unit never must be covered with cloth or other materials during

operation.

Refer servicing to qualied service personnel.

Warning! Risk Group 2 LED product according to EN 62471

LED light emission. Risk of eye injury. Do not look into the beam at short distance of

the of the product. Do not view the light output with optical instruments or any

device that may conncentrate the beam.

The light source contains blue LEDs.

When choosing the installation spot, please make sure that the pixelPATT are not exposed to extreme heat,

moisture or dust.

Operate the pixelPATT only after having familiarized with its functions. Do not permit operation by persons not

qualied for operating the pixelPATT. Most damages are the result of unprofessional operation!

Please use the original packaging if the pixelPATT is to be transported.

Please consider that unauthorized modications on the xture are forbidden due to safety reasons!

2. Description of the xture

Pixel positions

1 - Parabolic aluminium reectors

2 - Mounting yoke

3 - Tilt lock

4 - Mounting hole

5 - Control Input (4-pin XLR)

3. Installation

The PixelPatt must be installed by a qualied electrician in accordance with all

national and local electrical and construction codes and regulations.

3.1 Mounting the pixelPATT

The xture can be rigged to the truss or fastened to the oor stand via a mounting yoke. The hole of diameter

of 13 mm in the yoke serves for fastening a clamp (or a spigot) to the yoke.

Note: the spigot has to be inserted into the oor stand and always secured.

3.2 Connecting the pixelPATT with the PATT Driver

1. Disconnect the PATT Driver from mains.

2. Connect the pixelPATT to the PATT Driver by means of the 4-pin data cable.

3. Connect the PATT Driver to mains and make desired setting.

ALWAYS DISCONNECT THE PATT DRIVER FROM MAINS BEFORE CONNECTING/DISCONNECTING

THE PIXELPATT.

4. Technical specications

Input voltage: 48V

Max. power consumption: 210W

Compatible control driver: PATT Driver

Light source: 7x RGBW LED multichip

LED life expectancy: min. 20 000 hours

Typical lumen maintenance: 70% @ 20 000 hours

Optical System: 7 x 200 mm parabolic aluminium reector with high reectivity coating

Control input: Locking 4-pin XLR (male)

Max. length of cable between

PATT Driver and pixelPatt: 10m

Mounting Points: Mounting horizontally or vertically via mounting yoke (360° tilt range)

Rigging: M12 mounting for clamp or spigot.

Operation position: any

Ingress protection: IP20 (for dry location only)

Weight: 12 kg

Max. surface temperature: 65°C (at 45°C ambient)

Maximum ambient temperature: 45 °C

Total heat dissipation (calculated):716 BTU

Min. distance from ammable surfaces: 0.2 m

Min. distance of illuminated objects: 0.2 m

Dimensions (mm)

Wiring of control input:

Optional accessories

Tripod for PATT 2013/2017, pixelPATT (P/N 10980374)

Floor Stand for PATT 2013 (P/N 1098 0259)

Spigot for PATT 2013 (P/N 1098 0260)

1 - 0V

2 - Signal -

3- Signal +

4- +48V

Beam distribution

October 5, 2017

Specications are subject to change without notice.

Made in ROBE Lighting s.r.o., Palackého 416, 757 01 Valašské Meziříčí, Czech Republic

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Robe DJ-Equipment Handbücher

Robe

Robe Anolis Eminere 1 Bedienungsanleitung

Robe

Robe StageQube 324 Bedienungsanleitung

Robe

Robe Anolis Calumma S MC Bedienungsanleitung

Robe

Robe Anolis Calumma Remote M MC Bedienungsanleitung

Robe

Robe ROBIN T11 MFS Bedienungsanleitung

Robe

Robe Robin 1200 Bedienungsanleitung

Robe

Robe ANOLiS Eminere Remote UV 2 Bedienungsanleitung

Robe

Robe ColorStrobe IP Bedienungsanleitung

Robe

Robe ROBIN iForte Bedienungsanleitung

Robe

Robe ColorSpot 575E AT Bedienungsanleitung

Robe

Robe ROBIN UV Strobe Bedienungsanleitung

Robe

Robe ROBIN colorstrobe lite Bedienungsanleitung

Robe

Robe ROBIN MegaPointe Wireless DMX Bedienungsanleitung

Robe

Robe ROBIN BMFL LightMaster Side Bedienungsanleitung

Robe

Robe DigitalSpot 3000 DT Bedienungsanleitung

Robe

Robe ColorSpot 575 AT Bedienungsanleitung

Robe

Robe Strobe IP Bedienungsanleitung

Robe

Robe iSpiider Bedienungsanleitung

Robe

Robe Spot 575 XT Bedienungsanleitung

Robe

Robe Anolis Eminere 2 Wireless DMX Bedienungsanleitung

Robe

Robe Robin DL7F Bedienungsanleitung

Robe

Robe Robin SuperSpike Bedienungsanleitung

Robe

Robe Robin CycBar 12 Bedienungsanleitung

Robe

Robe Robin Tarrantula TW Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

Robe pixelPATT Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken