Robe Robin 1200 Bedienungsanleitung

Version1.4

Table of contents

1. Safety instructions ......................................................................................................... 3

2. Fixture exterior view ...................................................................................................... 5

3. Installation....................................................................................................................... 6

3.1 Connection to the mains ............................................................................................ 6

3.2 Installing the top hat ................................................................................................... 7

3.3 Installing the eggcrate ................................................................................................ 8

3.4 Rigging the xture ...................................................................................................... 9

3.5 DMX-512 connection................................................................................................ 11

3.6 Ethernet connection ................................................................................................. 12

4. Wireless DMX operation .............................................................................................. 14

5. Control menu map........................................................................................................ 15

6. Robin 1200 LEDWash - DMX chart.............................................................................. 18

6.1 Virtual colour wheel - colour mixing chart ............................................................... 22

7. Control menu ............................................................................................................... 27

7.1 Tab " Address" ......................................................................................................... 28

7.2 Tab "Information"...................................................................................................... 29

7.3 Tab "Personality"......................................................................................................30

7.4 Tab "Manual Control" ............................................................................................... 31

7.5 Tab "Stand-alone" ................................................................................................... 32

7.6 Tab "Service"............................................................................................................ 33

8. RDM ............................................................................................................................... 34

9. Error and information messages ................................................................................ 35

10. Technical Specications............................................................................................ 36

11. Maintenance and cleaning......................................................................................... 38

11.1 Replacing fuse ....................................................................................................... 39

12. ChangeLog ................................................................................................................. 39

13. Photometric diagrams................................................................................................ 40

Robin 1200 LEDWash

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE POWERING OR INSTALLING YOUR ROBIN 1200 LEDWASH !

Save it for future reference.

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to

ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning

notes written in this manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this

manual or any unauthorized modication to the device.

Please consider that damages caused by manual modications to the device are not subject to warranty.

The Robin 1200 LEDWash was designed for indoor use and it is intended for

professional application only. It is not for household use.

1. Safety instructions

DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS

UNIT!

Make sure that the available voltage is not higher than stated on the rear panel of the xture.

This xture should be operated only from the type of power source indicated on the marking label. If you are

not sure of the type of power supplied, consult your authorized distributor or local power company.

Always disconnect the xture from AC power before cleaning, removing or installing the fuses, or any part.

The power plug has to be accessible after installing the xture. Do not overload wall outlets and extension cords

as this canresult in re or electric shock.

Do not allow anything to rest on the power cord. Do not locate this xture where the cord may be damaged by

persons walking on it.

Make sure that the power cord is never crimped or damaged by sharp edges. Check the xture and the power

cord from time to time.

Refer servicing to qualied service personnel.

This xture falls under protection class I. Therefore this xture has to be connected to

a mains socket outlet with a protective earthing connection.

Do not connect this xture to a dimmer pack.

LED light emission. Risk of eye injury. Do not look into the beam at a distance of less

than 1 meter from the front surface of the product. Do not view the light output with

optical instruments or any device that may conncentrate the beam

If the xture has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on

immediately. The arising condensation water might damage your device. Leave the device switched off until

it has reached room temperature.

Do not shake the xture. Avoid brute force when installing or operating the xture.

This xture was designed for indoor use only, do not expose this unit to rain or use near water.

When choosing the installation spot, please make sure that the xture is not exposed to extreme heat, moisture

or dust.

Air vents and slots in the xture´s head and base are provided for ventilation, to ensure reliable operation of

the device and to protect it from overheating.

Do not block the LEDs array with any object when the xture is under operation.

The openings should never be covered with cloth or other materials, and never must be blocked.

This xture should not be placed in a built-in installation unless proper ventilation is provided.

Only operate the xture after having checked that the housing is rmly closed and all screws are tightly faste-

ned.

Always use a secondary safety cable when mounting this xture.

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the xtu-

re.

Do not block the front objective LEDs with any object when the xture is under operation.

The xture becomes very hot during operation. Allow the xture to cool approximately 20 minutes prior to

manipulate with it.

Operate the xture only after having familiarized with its functions. Do not permit operation by persons not

qualied for operating the xture. Most damages are the result of unprofessional operation!

Please use the original packaging if the xture is to be transported.

Please consider that unauthorized modications on the xture are forbidden due to safety reasons!

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-

circuit, burns, electric shock, crash etc.

2. Fixture exterior view

Rear panel of the base

1- 5-pin DMX IN

2- 3-pin DMX IN

3 - Fuse holder

4 - Ethernet input

5 - 5-pin DMX OUT

6 - 3-pin DMX OUT

7 - Power cord

1 - Lens array

2 - Handle

3 - QVGA touch screen

4 - Control buttons

5- Base

6- Tilt lock

The head should be locked for transportation- the tilt lock latch (6) has to be in the locked positions. To unlock

the head, move this latch to unlock position before operating the xture.

The ENTER/DISPLAY ON button also serves for switching the display on when the xture is disconnected

from the mains.

3. Installation

Fixtures must be installed by a Qualied electrician in accordance with all

national and local electrical and construction codes and regulation.

3.1 Connection to the mains

For protection from electric shock, the xture must be earthed!

The Robin 1200 LEDWash is equipped with auto-switching power supply that automatically adjusts to any 50-

60Hz AC power source from 100-250 Volts.

Install a suitable plug on the power cord, note that the cores in the power cord are coloured according to the

following table. The earth has to be connected!

If you have any doubts about proper installation, consult a qualied electrician.

Core (EU) Core (US) Connection Plug Terminal Marking

Brown Black Live L

Light blue White Neutral N

Yellow/Green Green Earth

3.2 Installing the top hat

Switch off the xture before top hat installation

1. Go to the xture menu and set reduced tilt movement (Personality --> Pan/Tilt Setting-->

Tilt Movement Range --> reduced).

2.Unscrew the four fastening screws (3) which securing flange (4) to the head (5) and install new flange. Keep

its right position- the cutouts (A) in the flange must look towards the arms.

Original flange New flange

3.Place the top hat (1) on the head (5), press locks (2) and turn the top hat counter-clockwise until it snap into

slots (B) in the flange.

3.3 Installing the eggcrate

Switch off the xture before top hat installation

1. Unscrew the four fastening screws (1) which securing top ange (2) to the head (7) and remove both ange

and transparent plastic cover (3) from the head.

2. Unscrew the three fastening screws (4) which securing black eggcrate (5) to the zoom module (6) and

remove it.

3. Put the transparent eggcrate on the zoom module (6) and screw it with three screws (4) with washers to

the zoom module (6).

4. Place the transparent cover (3) and the top flange (2) back to the head and secure it with four screws (1).

3.4 Rigging the xture

The installation of the xture has to be built and constructed in a way that it can hold 10 times the weight for 1

hour without any harming deformation.

The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.

This secondary safety attachment must be constructed in a way that no part of the installation can fall down if

the main attachment fails.

When rigging, derigging or servicing the xture staying in the area below the installation place, on bridges,

under high working places and other endangered areas is forbidden.

The operator has to make sure that safety-relating and machine-technical installations are approved by an expert

before taking into operation for the rst time and after changes before taking into operation another time.

The operator has to make sure that safety-relating and machine-technical installations are approved by an

expert after every four year in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled

person once a year.

The xture should be installed outside areas where persons may walk by or be seated.

IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)

calculating working load limits, installation material being used, and periodic safety inspection of all installation

material and the projector. If you lack these qualications, do not attempt the installation yourself, but instead

use a professional structural rigger. Improper installation can result in bodily injury or damage to property.

The xture has to be installed out of the reach of people.

If the xture shall be lowered from the ceiling or high joists, professional trussing systems have to be used. The

xture must never be xed swinging freely in the room.

Caution: Fixture may cause severe injuries when crashing down! If you have doubts concerning the safety of

a possible installation, do not install the moving head!

Before rigging make sure that the installation area can hold a minimum point load of 10 times the xture’s

weight.

When installing the device, make sure there is no highly inammable

material (decoration articles, etc.) in a distance of min. 0.5 m.

CAUTION!

Use an appropriate clamp to rig the xture on the truss.

Follow the instructions mentioned at the bottom of the base.

Make sure that the device is xed properly! Ensure that the

structure (truss) to which you are attaching the xtures is secure.

The xture can be placed directly on the stage oor or rigged in any orientation on a truss without altering its

operation characteristics .

For securing a xture to the truss install a safety wire that can hold at least 10 times the weight of the xture.

Use only safety wire with screw-on carabine. Pull the safety wire through the carrying handles and around the

truss as shown on the pictures below.

Note: If the safety wire is too long, whip it several times around the trusss in order to attach the xture tight.

In case of an accident, the way of the falling xture will be short.

Securing the xture via one safety wire Securing the xture via two safety wires

When installing xtures side-by-side,

avoid illuminating one xture with another!

1-Clamps

2-Safety wire

3-Omega holder

4-Quick-lock fastener

5-Carrying handles

6-Truss

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Robe DJ-Equipment Handbücher

Robe

Robe Robin CycBar 15 Bedienungsanleitung

Robe

Robe StageQube 324 Bedienungsanleitung

Robe

Robe ROBIN BMFL LightMaster Side Bedienungsanleitung

Robe

Robe ROBIN ParFect 150 TW Bedienungsanleitung

Robe

Robe Anolis Eminere 2 Wireless DMX Bedienungsanleitung

Robe

Robe Spot 575 XT Bedienungsanleitung

Robe

Robe ROBIN ParFect 100 SmartWhite Bedienungsanleitung

Robe

Robe REDpower 1-72 Bedienungsanleitung

Robe

Robe ROBIN SPIKIE Bedienungsanleitung

Robe

Robe Robin SuperSpike Bedienungsanleitung

Robe

Robe Painte Bedienungsanleitung

Robe

Robe Divine 60 UV Bedienungsanleitung

Robe

Robe Robin CycBar 12 Bedienungsanleitung

Robe

Robe Robin Tarrantula TW Bedienungsanleitung

Robe

Robe CitySource 96 WDMX Bedienungsanleitung

Robe

Robe iSpiider Bedienungsanleitung

Robe

Robe Strobe IP Bedienungsanleitung

Robe

Robe ROBIN UV Strobe Bedienungsanleitung

Robe

Robe DMX Control 512 Bedienungsanleitung

Robe

Robe ANOLiS Eminere Remote UV 2 Bedienungsanleitung

Robe

Robe Anolis Eminere 1 Bedienungsanleitung

Robe

Robe ROBIN MegaPointe Wireless DMX Bedienungsanleitung

Robe

Robe ROBIN SilverScan Wireless DMX Bedienungsanleitung

Robe

Robe ANOLIS Side Eminere 2 Wireles DMX Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung