Rockwell Automation Allen-Bradley PanelView Plus 400 Bedienungsanleitung

User Manual

Catalog Numbers

2711PC-K4M20D,

2711PC-B4C20D, 2711PC-T6M20D,

2711PC- T6C20D, 2711PC-T10C4D1

PanelView Plus Compact Terminals

Important User Information

Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines

for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local

Rockwell Automation sales office or online at http://literature.rockwellautomation.com) describes some important differences

between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the

wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves

that each intended application of this equipment is acceptable.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the

use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability

for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is

prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Allen-Bradley, PanelView Plus, PanelView Plus Compact, FactoryTalk View, FactoryTalk View ME, FactoryTalk View Studio, FactoryTalk ViewPoint, RSLinx Enterprise, Rockwell Automation, and TechConnect

are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

WARNING Identifies information about practices or circumstances that can cause an explosion in a

hazardous environment, which may lead to personal injury or death, property damage, or

economic loss.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

ATTENTION Identifies information about practices or circumstances that can lead to personal injury or death,

property damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and

recognize the consequence

SHOCK HAZARD Labels may be on or inside the equipment, for example, a drive or motor, to alert people that

dangerous voltage may be present.

BURN HAZARD Labels may be on or inside the equipment, for example, a drive or motor, to alert people that

surfaces may reach dangerous temperatures.

3Publication 2711PC-UM001A-EN-P - March 2009 3

Table of Contents

Preface

Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Additional Resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 1

Overview

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Catalog Number Explanation . . . . . . . . . . . . . . . . . . . . . . . . . 9

Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Hardware Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Chapter 2

Installing the Terminal

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Hazardous Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Environment and Enclosure. . . . . . . . . . . . . . . . . . . . . . . . . 16

Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Cutout Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Mount the 400 or 600 Terminal in a Panel . . . . . . . . . . . . . . 18

Mount the 1000 Terminal in a Panel. . . . . . . . . . . . . . . . . . . 20

Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Chapter 3

Connecting Power

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Wiring and Safety Guidelines. . . . . . . . . . . . . . . . . . . . . . . . 23

Removing and Installing the Power Terminal Block . . . . . . . 24

Connecting Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Resetting the Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Chapter 4

Configuring the Terminal

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Accessing Configuration Mode. . . . . . . . . . . . . . . . . . . . . . . 31

Loading an Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Running an Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Application Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Terminal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Configuring Communication . . . . . . . . . . . . . . . . . . . . . . . . 37

Configuring Network Information . . . . . . . . . . . . . . . . . . . . 41

Configuring Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Managing Files on the Terminal. . . . . . . . . . . . . . . . . . . . . . 47

Modifying Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . 50

Font Linking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Configuring the Keypad, Keyboard, or Mouse . . . . . . . . . . . 54

4Publication 2711PC-UM001A-EN-P - March 2009

Table of Contents

Configuring the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . 56

Configuring Print Options . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Configuring Startup Options . . . . . . . . . . . . . . . . . . . . . . . . 60

Configuring Startup Tests. . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Clearing the System Event Log. . . . . . . . . . . . . . . . . . . . . . . 65

Displaying Terminal Information . . . . . . . . . . . . . . . . . . . . . 66

Displaying

FactoryTalk View ME Station Information. . . . . . . . . . . . . . . 68

Modifying the Date, Time, or Time Zone . . . . . . . . . . . . . . . 69

Modifying Regional Settings. . . . . . . . . . . . . . . . . . . . . . . . . 71

Chapter 5

Installing and Replacing

Components

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Replacing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Replacing the Backlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Using an External CompactFlash Card . . . . . . . . . . . . . . . . . 81

Removing the Product ID Label . . . . . . . . . . . . . . . . . . . . . . 82

Replacing the Bezel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Cleaning the

Display Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Chapter 6

Terminal Connections

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Cables for Runtime Communication . . . . . . . . . . . . . . . . . . . 87

Communication Port Isolation . . . . . . . . . . . . . . . . . . . . . . . 88

USB Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Serial Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Ethernet Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Chapter 7

Upgrading Firmware

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Transferring Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Firmware Upgrade Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . 95

Preparing Terminal

for Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Upgrading Firmware with a CompactFlash Card . . . . . . . . . . 96

Upgrading Firmware over a Network Connection . . . . . . . . 100

Publication 2711PC-UM001A-EN-P - March 2009 5

Table of Contents

Chapter 8

Troubleshooting

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Isolating the Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Startup Information Messages . . . . . . . . . . . . . . . . . . . . . . 108

Startup Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Startup Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Checking Terminal Components . . . . . . . . . . . . . . . . . . . . 111

Ethernet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Hardware Compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Application Does Not Load . . . . . . . . . . . . . . . . . . . . . . . . 115

Application Does Not Run . . . . . . . . . . . . . . . . . . . . . . . . . 116

Configuration Mode Access . . . . . . . . . . . . . . . . . . . . . . . . 116

Appendix A

Specifications

Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Agency Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Appendix B

USB Devices

Compatible USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Appendix C

Available Fonts

Download Fonts to Terminal . . . . . . . . . . . . . . . . . . . . . . . 123

Machine Edition Fonts CD . . . . . . . . . . . . . . . . . . . . . . . . . 124

Index

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

6Publication 2711PC-UM001A-EN-P - March 2009

Table of Contents

7Publication 2711PC-UM001A-EN-P - March 2009 7

Preface

Intended Audience

Use this manual if you are responsible for installing, configuring, and

operating the PanelView Plus Compact terminals.

No special knowledge is required to understand this manual or

operate the terminal. However, you must understand the functions

and operations of the FactoryTalk View ME applications that will run

on the terminal. Consult the application designer for this information.

Equipment installers must be familiar with standard panel installation

techniques.

Parts List

Your terminal is shipped with these items:

•Power terminal block

•FactoryTalk View ME runtime software preloaded

•Mounting levers or mounting clips (model dependent)

•Panel cutout template

•Installation instructions

Additional Resources

The table lists resources available for the PanelView Plus terminals.

You can view or download publications at

http://literature.rockwellautomation.com. To order paper copies of

technical documentation, contact your local Rockwell Automation

distributor or sales representative.

Resource Description

PanelView Plus 400 and 600 Terminals

Installation Instructions, publication

2711P-IN002

Provides details on how to install the

terminals in a panel, and wire power.

PanelView Plus 700 to 1500 Terminals and

Display Modules, and PanelView Plus

Compact 1000 Terminals, Installation

Instructions, publication 2711P-IN001

Provides details on how to install the

terminals in a panel, and wire power.

Wiring and Grounding Guidelines for

PanelView Plus Devices Technical Data,

publication 2711P-TD001

Provides grounding and wiring guidelines

for PanelView Plus terminals.

8Publication 2711PC-UM001A-EN-P - March 2009

Preface

9Publication 2711PC-UM001A-EN-P - March 2009 9

Chapter

Overview

Chapter Objectives

This chapter covers these topics:

•Product description

•Catalog number explanation

•Software support

•Terminal configurations

•Display modules

•Accessories

Product Overview

The PanelView Plus Compact terminals are similar to some PanelView

Plus terminal configurations but with limited hardware and software

functions. Major differences of the compact terminals include:

•Fixed hardware configuration, without the addition or

replacement of modular components.

•Serial and Ethernet communication only.

•Connection to a single logic controller using either RSLinx

Enterprise or KEPServer Enterprise software, not both.

•Limited number of displays and alarms in the FactoryTalk View

Machine Edition (ME) application and runtime software.

•FactoryTalk ViewPoint software is not supported.

•Primary HMI for CompactLogix controllers.

Catalog Number

Explanation

The table provides catalog number configurations for the PanelView

Plus Compact terminals.

TIP Applications created for PanelView Plus Compact terminals are

referred to as Compact Machine Edition applications. You can

run compact applications on PanelView Plus and PanelView

Plus Compact terminals. You cannot run a regular Machine

Edition application created for a PanelView Plus terminal on a

PanelView Plus Compact terminal.

Cat. No. Display Size Operator Input Display Type Input Power

2711PC-K4M20D 4 inch Keypad Monochrome

2711PC-B4C20D Keypad and Touch Color

2711PC-T6M20D 6 inch Touch Monochrome

2711PC-T6C20D Color

2711PC-T10C4D1 10 inch Touch Color

10 Publication 2711PC-UM001A-EN-P - March 2009

Chapter 1 Overview

Software Support

Each terminal is preloaded with FactoryTalk View Machine Edition

runtime and configuration software that does not require activation.

Applications for the compact terminals are created using FactoryTalk

View Studio software.

Compact Machine Edition applications are restricted to a subset of the

functions allowed on the PanelView Plus terminals.

•Maximum of 25 displays

•Maximum of 200 alarm messages

•Maximum screen resolution of 640 x 480 (VGA)

•one connection or shortcut to a single controller using either

RSLinx Enterprise 5.20 or KEPServer Enterprise.

•Serial and Ethernet communication only.

If using RSLinx Enterprise, only serial-DF1, serial-DH485 and

Ethernet drivers are supported.

Hardware Configurations

The terminal configurations are fixed and do not support

communication modules. The 1000 touch terminal has a fixed display

module and logic module that cannot be replaced.

Software Requirements Version

FactoryTalk View Studio 5.1 or later

RSLinx Enterprise(1)

(1) RSLinx Enterprise software is provided with FactoryTalk View Studio. During software installation, you are

prompted to install RSLinx Enterprise software.

5.20 or later

400 and 600 Configurations 1000 Configuration

1234

Item Description

1USB port(1)

(1) The 400 and 600 models have one USB port; the 1000 model have two USB ports.

2 RS-232 serial port

3 10/100BaseT Ethernet port

4 Power input, 24V DC

5 CompactFlash Type 1 card slot

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Industrieanlagen Handbücher

Rockwell Automation

Rockwell Automation 14C226 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 140G-G-RMB Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster GuardShield 440L-AGST... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley ControlNet Ex Media Technisches Handbuch

Rockwell Automation

Rockwell Automation Allen-Bradley 1718-CBL65 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1771-IFMS Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 140G Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 20P Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster Minotaur MSR178DP Bedienungsanleitung

Rockwell Automation

Rockwell Automation Discrete Machine Performance Solution Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley CrossBoard 141C-NFD Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation B Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster MSR124RT Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley CENTERLINE 400 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 6189V-BOOKBRKT Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1794-IJ2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MegaDySC Dynamic Voltage Sag... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLSREDS40HE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MagneMotion QuickStick Series Leitfaden

Rockwell Automation

Rockwell Automation Allen-Bradley MicroLogix 1100 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 7000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 755T Flux Vector... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley VersaVirtual Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation 104-C60 Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung