Rockwell Automation 14C226 Bedienungsanleitung

Reliance and MinPak are trademarks of Rockwell Automation.

Automatic Reversing Kit for Non-Regenerative

FlexPak Plus and MinPak Plus DC Drives

Model Number 14C226

Instruction Manual D2-3384

Product Description

The Automatic Reversing kit provides automatic reverse-direction capability for single-phase, non-regenerative

FlexPak™ Plus and MinPak™ Plus DC drives. The Automatic Reversing kit allows the drive to sequence off,

and then immediately sequence on again, providing a fast, automatic change of direction. This response can

be generated by either an external switching signal or by the manual Forward/Reverse switch on the operator’s

control station.

Important: The Automatic Reversing kit cannot be used with the Dynamic Braking kit.

To use the Automatic Reversing kit with:

•1/4 to 1-1/2 HP MinPak Plus drives: An Auxiliary Mounting Bracket (M/N 14C209) and a Reversing Contactor

(M/N 14C217 or 14C218) must be installed.

•3 to 5 HP MinPak Plus drives: A Reversing Contactor (M/N 14C217 or 14C218) must be installed.

•FlexPak Plus drives: A Reversing Contactor (M/N 14C293) must be installed.

The Automatic Reversing kit is a printed circuit board assembly with a fixed wire harness. The kit mounts on

the drive’s auxiliary mounting bracket. No other mounting hardware is required. The contents of the Automatic

Reversing kit are listed in table 1.

!ATTENTION:Only qualified electrical personnel familiar with the construction and operation of

this equipment and the hazards involved should install, adjust, operate, and/or service this

equipment. Read and understand this manual and other applicable manuals in their entirety

before proceeding. Failure to observe this precaution could result in severe bodily injury or loss

of life.

ATTENTION:The Automatic Reversing kit contains static-sensitive components. Do not touch

the components or connectors on the printed circuit board. When not installed, the contents of

the kit should be stored in an anti-static bag. Failure to observe this precaution could result in

damage to, or destruction of, the equipment.

Table 1 – Contents of the Automatic Reversing Option

Description Quantity Part Number

Automatic Reversing Kit with Wire Harness 1 0-54380

Instruction Manual 1 D2-3384

Installing the Automatic Reversing Kit

Refer to your drive instruction manual for help locating and identifying drive components. To install the

Automatic Reversing kit in your FlexPak Plus or MinPak Plus non-regenerative DC drive:

Step 1. Disconnect, lock out, and tag input power to the drive.

Step 2. Remove the drive cover.

Step 3. Verify that no voltage is present at the drive’s AC input terminals, L1 and L2.

Step 4. Mount the Automatic Reversing kit on the right side of the Auxiliary Mounting Bracket. Orient the kit so

that the wiring harness points down toward the Regulator board. Press the four nylon pins on the kit

firmly into the mounting holes in the bracket.

Step 5. Connect the Automatic Reversing kit’s three-wire harness connector to the three pins labeled “AUTO

REV.” These pins are near the upper left corner of the drive’s Regulator board, to the right of the

connector for the Auxiliary M-Contactor. Connect the purple wire (40) to the pin marked “PUR”. Press

the connector onto the pins.

Step 6. Reattach the cover to the drive.

Step 7. Apply power and test the operation of the drive.

This completes installation of the Automatic Reversing kit.

!ATTENTION:Do not install modification kits with power applied to the drive. Disconnect, lock

out, and tag all sources of incoming AC power to the drive before attempting such installation.

Verify that no voltage is present at the drive’s AC input terminals, L1 and L2. Failure to observe

this precaution could result in severe bodily injury or loss of life.

ATTENTION:The user is responsible for conforming with all applicable local, national, and

international codes. Failure to observe this precaution could result in damage to, or destruction

of, the equipment.

ATTENTION:This kit contains ESD (Electrostatic Discharge) sensitive parts and assemblies.

Static control precautions are required when installing, testing, servicing, or repairing this

assembly. Failure to observe these precautions could result in damage to, or destruction of, the

equipment.

U.S. Drives Technical Support

Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, Email: [email protected], Online: www.ab.com/support/abdrives

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Inhaltsverzeichnis

Andere Rockwell Automation Industrieanlagen Handbücher

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 7000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley ControlNet Ex Media Technisches Handbuch

Rockwell Automation

Rockwell Automation Allen-Bradley PowerMonitor 5000 Unit Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1732E-IT4IM12R Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 7703E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1719 Ex I/O Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley FLEX Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 140G Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation 194R-SC1 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex AFE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster GuardShield450L Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MagneMotion QuickStick Series Leitfaden

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 750-21G Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley LDAT-S03 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation iTRAK Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster 442G-MAB B-U... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster Minotaur MSR178DP Bedienungsanleitung

Rockwell Automation

Rockwell Automation RELIANCE ELECTRIC INVERTRON DBU-50 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Discrete Machine Performance Solution Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MegaDySC Dynamic Voltage Sag... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MicroLogix 1100 Bedienungsanleitung

Rockwell Automation

Rockwell Automation VersaView 5100 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Guardmaster GuardShield 440L-AGST... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1794-IJ2 Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung