Rosewill RC304-E Bedienungsanleitung

2 ports Parallel PCIe Card RC304-E

User Manual

2 ports Parallel PCIe Card RC304-E User Manual

Features and Benefits

zCompliant with PCI Express Base Specification 1.0a

zSupports Standard Parallel Port(SPP), Enhanced Parallel Port(EPP) & Enhanced Capability Port(ECP)

zData transfer rate up to 1.5MB/Sec

zPCI-Express X1

z2 x 25 pins parallel connectors

Package Contents

zPCIe Parallel Card 2 Ports

zDriver CD

zUser Manual

System Requirements

zWindows® 2000/XP/Server 2003

zPCI Express-enabled system with an available PCI Express slot

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the

board down firmly.

5. Connect the system power source to the board’s power connector.

6. Replace the slot bracket’s holding screw to secure the card.

Replace the computer cover and reconnect the power cord.

Driver Installation

Please make sure the board is installed before proceeding with driver installation.

For Windows® 2000

1.At the Found New Hardware Wizard, click Next.

2.Select Search for a suitable driver for my device(recommended), and click Next.

2 ports Parallel PCIe Card RC304-E User Manual

3.Check Specify a location, uncheck the other boxes, then click Next.

4.Insert the Driver CD, type in D:\PCIe\2P\2000, then click OK. (Change D: to match your CD-ROM driver letter)

5.Click Next and Finish.

6.Restart Windows to complete the installation.

For Windows® XP

1.At the Found New Hardware Wizard, select Install from a list or specific location(Advanced), then click Next.

2.Insert the Driver CD, check Include this location in the search, uncheck the other box, type in D:\PCIe\2P\XP, then

click OK. (Change D: to match your CD-ROM drive letter)

2 ports Parallel PCIe Card RC304-E User Manual

3.If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly

tested for stability and compatibility.

4.Repeat steps 1-3 two more times.

5.Restart Windows to complete the installation.

For Windows® Server 2003

1.At the Found New Hardware Wizard, select Install from a list or specific location(Advanced), then click Next.

2.Insert the Driver CD, check Include this location in the search, uncheck the other box, type in D:\PCIe\2P\2003, then

click OK. (Change D: to match your CD-ROM drive letter)

3.If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly

tested for stability and compatibility.

4.Repeat steps 1-3 two more times.

2 ports Parallel PCIe Card RC304-E User Manual

Restart Windows to complete the installation.

To Verify Windows® 2000/XP/Server 20003 Installation

1.Right click My Computer, then click Manage. Click Device Manager.

2.Click on the +(plus sign) in front of Ports(COM & LPT), two NetMos PCI ECP Parallel Port … should be displayed.

3.Double click Multifunction adapters, NetMos 9815 PCI Multi-I/O Controller should be displayed.

Change Parallel Port Address

Some parallel devices need a specific parallel port in order to work. If your parallel devices works properly, do not change

this settings.

For Windows® 2000/XP/Server 20003 Installation

1.From the Device Manager window double click Ports(COM & LPT), then double click the NetMos PCI ECP Parallel

Port …

2.Click Port Settings tab.

3.At the LPT Port Number box, click the down arrow and select an LPT port that is not in use.

Click OK, then close Device Manager to save the changes.

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and future support for your product.

Inhaltsverzeichnis

Andere Rosewill PCI-Karte Handbücher

Rosewill

Rosewill RNX-N150PCe Bedienungsanleitung

Rosewill

Rosewill RSV-S4-6G Bedienungsanleitung

Rosewill

Rosewill RNX-N300 Bedienungsanleitung

Rosewill

Rosewill RC-400 Bedienungsanleitung

Rosewill

Rosewill RC503 Bedienungsanleitung

Rosewill

Rosewill RC214 Bedienungsanleitung

Rosewill

Rosewill RC302 Bedienungsanleitung

Rosewill

Rosewill RC-NIC412 Bedienungsanleitung

Rosewill

Rosewill RNX-G100 Bedienungsanleitung

Rosewill

Rosewill RC-304 Bedienungsanleitung

Rosewill

Rosewill RC-209-EX Bedienungsanleitung

Rosewill

Rosewill RNX-N150PCe Bedienungsanleitung

Rosewill

Rosewill RNWD?N9003PCE Bedienungsanleitung

Rosewill

Rosewill RC-401 Bedienungsanleitung

Rosewill

Rosewill RC-303 Bedienungsanleitung

Rosewill

Rosewill RNX-N300 Bedienungsanleitung

Rosewill

Rosewill RC400 Bedienungsanleitung

Rosewill

Rosewill RNWD?N9003PCE Bedienungsanleitung

Rosewill

Rosewill RC205 Bedienungsanleitung

Rosewill

Rosewill RNWD-N9003 PCE Bedienungsanleitung

Rosewill

Rosewill RC-100 Bedienungsanleitung

Rosewill

Rosewill RC-213 Bedienungsanleitung

Rosewill

Rosewill RNX-N150PCe Bedienungsanleitung

Rosewill

Rosewill RC210 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung