Rosewill RC-301E Bedienungsanleitung

2 ports Serial PCIe Card RC301-E

User Manual

2 ports Serial PCIe Card RC301-E User Manual

Features and Benefits

zCompliant with PCI Express Base Specification 1.0a

zSupports 2 x UART serial port

zBuild in 16C550 compatible UART with 16 byte transmit-receive FIFO

zData transfer rate up to 115200bps

zPCI-Express X1

z2 x 9 pins serial connectors

Package Contents

zPCIe Serial Card 2 Ports

zDriver CD

zUser Manual

System Requirements

zWindows® 2000/XP/Server 2003

zPCI Express-enabled system with an available PCI Express slot

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the

board down firmly.

5. Connect the system power source to the board’s power connector.

6. Replace the slot bracket’s holding screw to secure the card.

7. Replace the computer cover and reconnect the power cord.

Driver Installation

Please make sure the board is installed before proceeding with driver installation.

For Windows® 2000

1.At the Found New Hardware Wizard, click Next.

2.Select Search for a suitable driver for my device(recommended), and click Next.

2 ports Serial PCIe Card RC301-E User Manual

3.Check Specify a location, uncheck the other boxes, then click Next.

4.Insert the Driver CD, type in D:\PCIe\2S\2000, then click OK. (Change D: to match your CD-ROM driver letter)

5.Click Next and Finish.

6.Restart Windows to complete the installation.

For Windows® XP

1.At the Found New Hardware Wizard, select Install from a list or specific location(Advanced), then click Next.

2.Insert the Driver CD, check Include this location in the search, uncheck the other box, type in D:\PCIe\2S\XP, then click

OK. (Change D: to match your CD-ROM drive letter)

2 ports Serial PCIe Card RC301-E User Manual

3.If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly tested

for stability and compatibility.

4.Repeat steps 1-3 two more times.

5.Restart Windows to complete the installation.

For Windows® Server 2003

1.At the Found New Hardware Wizard, select Install from a list or specific location (Advanced), then click Next.

2.Insert the Driver CD, check Include this location in the search, uncheck the other box, type in D:\PCIe\2S\2003, then

click OK. (Change D: to match your CD-ROM drive letter)

3.If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly tested

for stability and compatibility.

4.Repeat steps 1-3 two more times.

2 ports Serial PCIe Card RC301-E User Manual

Restart Windows to complete the installation.

To Verify Windows® 2000/XP/Server 20003 Installation

1.Right click My Computer, then click Manage. Click Device Manager.

2.Click on the +(plus sign) in front of Ports(COM & LPT), two NetMos PCI Serial Port … should be displayed.

3.Double click Multifunction adapters, NetMos 9835 PCI Multi-I/O Controller should be displayed.

Change COM Port Address

Some serial devices need a specific COM port in order to work. If your serial devices works properly, do not change this

settings.

For Windows® 2000/XP/Server 20003 Installation

1.From the Device Manager window double click Ports(COM & LPT), then double click the NetMos PCI Serial Port you

want to change.

2.Click Settings tab and click Advanced.

3.Click the down arrow that is next to the COM Port Number box, select a COM port that is not in use, then click OK.

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and future support for your product.

Inhaltsverzeichnis

Andere Rosewill PCI-Karte Handbücher

Rosewill

Rosewill RC302 Bedienungsanleitung

Rosewill

Rosewill RC-305 Bedienungsanleitung

Rosewill

Rosewill RNX-G100 Bedienungsanleitung

Rosewill

Rosewill RC-301EU Bedienungsanleitung

Rosewill

Rosewill RC-510 Bedienungsanleitung

Rosewill

Rosewill RNWD?N9003PCE Bedienungsanleitung

Rosewill

Rosewill RNX-N250PC2 Bedienungsanleitung

Rosewill

Rosewill RC501 Bedienungsanleitung

Rosewill

Rosewill RSV-S4-6G Bedienungsanleitung

Rosewill

Rosewill RC304-E Bedienungsanleitung

Rosewill

Rosewill RC303 Bedienungsanleitung

Rosewill

Rosewill RC-223 Bedienungsanleitung

Rosewill

Rosewill RC400 Bedienungsanleitung

Rosewill

Rosewill RNX-N150PCe Bedienungsanleitung

Rosewill

Rosewill SATA II 4 Port PCI RAID Card RC217 Bedienungsanleitung

Rosewill

Rosewill RNX-N150PCe Bedienungsanleitung

Rosewill

Rosewill RC-110 Bedienungsanleitung

Rosewill

Rosewill RC-304 Bedienungsanleitung

Rosewill

Rosewill RC-209-EX Bedienungsanleitung

Rosewill

Rosewill RC-209 Bedienungsanleitung

Rosewill

Rosewill RC601 Bedienungsanleitung

Rosewill

Rosewill RC-213 Bedienungsanleitung

Rosewill

Rosewill RC508 Bedienungsanleitung

Rosewill

Rosewill RC-100 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung