Ruijie RG-R SR30 Series Installations- und Betriebsanleitung

RG-RSR30 Series Routers

Hardware Installation and Reference Guide 1.02

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup,

modification, transmission, translation or commercial use of this document or any portion of this document,

in any form or by any means, without the prior written consent of Ruijie Networks is prohibited.

, , , ,

, ,

, , ,

, , are registered trademarks of Ruijie

Networks. Counterfeit is strictly prohibited.

Exemption statement

This document is provided “as is”. The contents of this document are subject to change without any notice.

Please obtain the latest information through the Ruijie Networks website. Ruijie Networks endeavors to

ensure content accuracy and will not shoulder any responsibility for losses and damages caused due to

content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the router.

Scope

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks website: http://www.ruijienetworks.com

Online customer services: http://webchat.ruijie.com.cn

Customer service center: http://www.ruijie.com.cn/service.aspx

Customer services hotline: +86-4008-111-000

BBS: http://support.ruijie.com.cn

Customer services email: [email protected]

Related Documents

Documents Description

Configuration Guide Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Documentation Conventions

The symbols used in this document are described as below:

This symbol brings your attention to some helpful suggestions and references.

This symbol means that you must be extremely careful not to do some things that may damage the device or

cause data loss.

Hardware Installation and Reference Guide Overview

Overview

The RSR30 series routers are proprietary data communication products independently developed by Ruijie Networks

Co. Ltd by using advanced semiconductor and communication control technologies. Ruijie series routers are

developed in full compliance with international standard, therefore, they are similar to major routers in terms of usage

and configuration. Network administrators familiar with the configuration commands of major routers can use RSR30

series routers without training.

RSR30 Series Routers

The RSR30 series has one model, namely RSR30-44.

RSR30-44 Router Overview

With modular design, high processing capability and high access density, the RSR30-44 can serve as the access

router of large branches and the convergence rotuer of small branches.

Using high performance microprocessor and Ruijie’s proprietary network operating system, the RSR30-44 supports

BGP, IP multicast, high spped forwarding and rich QoS features to offer comprehensive network solutions for the

industries such as telecommunications, private network, ISP, finance, tax, public security, and railways as well as

middle and large-sized enterprises.

The RSR30-44 is a modularized router that includes the RSR30-44 chasis and optional modules. It supports two types

of modules-SIC and NMX:

SIC module:

1-port non-channelized E1 interface card (SIC-1E1-F) (up to two cards are supported)

1-port channelized CE1 module (SIC-1CE1) (up to two cards are supported)

1-port high speed synchronous serial port interface card (SIC-1HS) (up to three cards are supported)

8-port high speed asynchronous serial port interface card (SIC-8A)

2-port FXS voice interface card (SIC-2FXS)

2-port FXO voice interface card (SIC-2FXO)

1-port ISDN basic rate U interface card(SIC-1B-U)

1-port ISDN basic rate S/T interface card(SIC-1B-S/T)

TD-SCDMA 3G WWAN module(SIC-3G-TD) (up to three cards are supported)

WCDMA 3G WWAN module(SIC-3G-WCDMA) (up to three cards are supported)

CDMA2000 3G WWAN module(SIC-3G-CDMA) (up to three cards are supported)

NMX module:

2-port Gigabit Ethernet network adapter (NMX-2GEH)

8-port E1/CE1 card (NMX-8E1/CE1H)

4-port E1/CE1 card (NMX-4E1/CE1H)

Hardware Installation and Reference Guide Overview

4-port high-speed synchronous serial interface module (NMX-4HSH)

1-port CPOS-STM1 line card (NMX-1CPOS-STM1H)

1-port ATM module (NMX-1ATM-STM1H)

24-port Layer 2 switching module (NMX-24ESW) (up to two modules are supported)

1-port POS module (NMX-1POS-STM1H)

6-port module (NMX-6FEH)

Ruijie Ipsec NMX encrypted module (NMX-SECH V1.X) (up to six modules are supported)

When purchasing the RSR30-44 modular routers, select functional modules following these rules:

Unless otherwise specified, up to four modules of the same type are supported.

Functional modules are related to slot position. Some modules may be inserted in one or several slots only. For

details, refer to the supported module list on the RSR30-44.

Interface cables shall match functional modules connected.

For more information on functional modules, refer to related sections.

The RSR30-44 supports V1.0 and V1.1 versions of NMX-2GEH, NMX-4HSH, and NMX-1CPOS-STM1H.

The V1.1 version of the above NMX modules must be used together with the 10.2 main program and

higher version, and it supports the hot-plugging. For the hot-plugging details, see the software manual.

RSR30-44 supports V1.0, V1.1 and V2.0 versions of NMX-8E1/CE1H and NMX-4E1/CE1H. The V1.1

version of the above NMX modules must be used together with the 10.2 main program and higher version,

and it supports the hot-plugging. For the hot-plugging details, see the software manual. The V2.0 version

of the above NMX modules must be used together with the 10.4(1) and higher version, and it supports the

hot-plugging. For the hot-plugging details, see the software manual.

All NMX modules are hot swapping, except for NMX-24ESW.

Highlights

High-density aggregate access and high processing capability

The RSR30-44 connects DDN, frame relay, or X.25 through Synchronous serial ports and enables high speed

forwarding through 1000M ports. Hence, it can serve as the core router of small- and media-sized enterprises and the

access rotuer of large branches.

Compatibility

The RSR30-44 is fully compatible with equipments of other suppliers.

Power supply

Hardware Installation and Reference Guide Overview

The RSR30-44 adopts GB4943-compliant power supplies to prevent surging, over-voltage, under-voltage and

over-current for stable, and reliable output with instant power-failure protection

Chassis

The RSR30-44 adopts standard 19in chassis, which can resist electromagnetic radiation, shock, high and low

temperature.

Certificate

The RSR30-44 has passed the access test of telecom network equipments by the MII

Appearance and Indicators

Front panel of The RSR30-44 router

Back panel of the RSR30-44 router

Parameters

The following table lists the parameters of the RSR30-44:

Item RSR30-44

Slot for control board 1 (at most one control module can be configured)

Hardware Installation and Reference Guide Overview

Slot for functional module Multiple as required (at most four NMX modules and four SIC modules can be

configured)

Slot for power module 2 (at most two modules can be configured)

External dimension (W x H

x D) 440 mm x 161.4 mm x 412 mm (excluding the hangers on both sides)

Input voltage AC100–240V 50–60Hz

Total power consumption < 150 W

Operating temperature 0 to 40°C

Storage temperature -40 to 70°C

Operating humidity 20–90%RH (non-condensing)

Slot Numbering

The slots of NMX moudle are numbered as below:

On the front panel, the slot for control board is numbered 0, and the rest numbered 1 to 4 from left to right and from

bottom to up, as shown in the following figure.

The slots of SIC moudle are numbered as below:

The slots of SIC moudle are located on the control module. On the front panel, the slots are numbered 5 to 8 from left to

right and from bottom to up, as shown in the following figure.

Supported Modules List

The following tables shows the modules supported on the RSR30-44:

Slot Number Line Card Supported Remarks

Hardware Installation and Reference Guide Overview

1 NMX-8E1H V2.XX, NMX-4E1H V2.XX,

NMX-4HSH V1.1X, NMX-24ESW V1.XX,

NMX-2GEH V1.1X, NMX-1CPOSH V1.1X,

NMX-1ATMH V1.XX, NMX-6FEH, NMX-SECH

V1.x

2 NMX-8E1H V2.XX, NMX-4E1H V2.XX,

NMX-4HSH V1.1X, NMX-2GEH V1.1X,

NMX-1CPOSH V1.1X, NMX-1ATMH V1.XX,

NMX-6FEH, NMX-SECH V1.x

NMX-24ESW is not supported

3 NMX-8E1H V2.XX, NMX-4E1H V2.XX,

NMX-4HSH V1.1X, NMX-24ESW V1.XX,

NMX-2GEH V1.1X, NMX-1CPOSH V1.1X,

NMX-1ATMH V1.XX, NMX-6FEH, NMX-SECH

V1.x

4 NMX-8E1H V2.XX, NMX-4E1H V2.XX,

NMX-4HSH V1.1X, NMX-2GEH V1.1X,

NMX-1CPOSH V1.1X, NMX-1ATMH V1.XX,

NMX-6FEH, NMX-SECH V1.x

NMX-24ESW is not supported

5 SIC-1B-S/T V1.XX, SIC-1B-U V1.XX, SIC-2FXS

V1.XX, SIC-2FX0 V1.XX, SIC-8A V1.XX

SIC-1E1-F, SIC-1CE1, SIC-1HS, SIC-3G-TD,

SIC-3G-WCDMA, SIC-3G-CDMA are not

supported

6 SIC-1HS V1.XX,SIC-1B-S/T V1.XX, SIC-1B-U

V1.XX, SIC-2FXS V1.XX, SIC-2FX0 V1.XX,

SIC-8A V1.XX, SIC-3G-TD, SIC-3G-WCDMA,

SIC-3G-CDMA

SIC-1E1-F, SIC-1CE1 are not supported

7 SIC-1B-S/T V1.XX, SIC-1B-U V1.XX, SIC-2FXS

V1.XX, SIC-2FX0 V1.XX, SIC-1HS V1.XX,

SIC-1E1-F V1.XX, SIC-8A V1.XX, SIC-1CE1

V1.XX, SIC-3G-TD, SIC-3G-WCDMA,

SIC-3G-CDMA

8 SIC-1B-S/T V1.XX, SIC-1B-U V1.XX, SIC-2FXS

V1.XX, SIC-2FX0 V1.XX, SIC-1HS V1.XX,

SIC-1E1-F V1.XX, SIC-8A V1.XX, SIC-1CE1

V1.XX, SIC-3G-TD, SIC-3G-WCDMA,

SIC-3G-CDMA

Introduction to Control Modules

RSR30-RCM44-512M-2GE

The RSR30-RCM44-512M-2GE is applicable to the RSR30-44 series routers.

Hardware Installation and Reference Guide Overview

Appearance and Indicators

Appearance of the RSR30-RCM44-512M-2GE

RSR30-RCM44-512M-2GE has two status indicators:

Power: indicating power status. Green and ON indicate the power module works normally; Green and off indicate

the power is faulty.

System: indicating system status. Green and flashing indicate the system is starting. Green and ON indicate the

system works properly. Red and off indicate the system is faulty. Off indicates the system is not powered on.

The RSR30-RCM44-512M-2GE has two optic-electric multiplexing 1000M Ethernet interfaces. Each RJ45 port has two

status indicators, namely Link/Act and 1000M. Each SFP port has one indicator, namely Link/Act.

Link/Act indicator: ON means this port is linked up with other network equipments; Flashing means data is

transmitting on the port; OFF means no connection is set up.

1000M indicator: ON means the data is transmitted at 1000 Mbps; OFF means the data is transmitted at 100

Mbps or 10 Mbps.

Module Attributes

Item RSR30-RCM44-512M-2GE

Default

Configuration

One Console port, one AUX port, two 10/100/1000M adaptive Ethernet ports/1000M SFP

optical transceiver ports (optic-electric multiplexing)

Extended slots Four types of extended slots, including one DDR slot and four SIC slots, which can be

configured as required

Processor PowerPC high performance processor

BOOT ROM 2 MB NOR FLASH

DDR

SDRAM 512MB (DDR333)

Data NAND FLASH 512 MB

It is recommended to use Telcast and Kingston U-shaped disc purchased through official channels.

DDR SDRAM serves as the main storage, namely memory.

FLASH stores main software.

Hardware Installation and Reference Guide Overview

Module Interface

1000M Ethernet interface

The RSR30-RCM44-512M-2GE comes with two 10/100/1000 Mbps Ethernet interfaces, each supports both optical and

electric connectors-RJ45 and SFP. Users may choose them according to actual needs.

The RSR30-RCM44-512M-2GE comes with four 1000 Base-FX SFP/LC pluggable optical interface modules. User may

choose them according to actual needs.

Available SFP

modules

Mini-GBIC-SX: 1-port 1000BASE-SX mini GBIC conversion module (LC interface)

Mini-GBIC-LX: 1-port 1000BASE-LX mini GBIC conversion module (LC interface)

Mini-GBIC-LH40: 1-port 1000BASE-ZX mini GBIC conversion module (LC connector), 40km

Mini-GBIC-ZX50: 1-port 1000BASE-ZX mini GBIC conversion module (LC connector), 50km

Mini-GBIC-ZX80: single port 1000BASE-ZX min GBIC conversion module (LC interface), 80km

Features of optional transmission media:

Transmission

media and

maximum

transmission

distance

1000BASE-SX: wavelength 850 nm

Maximum transmission distance of 62.5/125 um multimode fiber is 220m

Maximum transmission distance of 50/125 um multimode fiber is 500 m

1000BASE-LX: wavelength 1310nm

Maximum transmission distance of 62.5/125 um multimode fiber is 550m;

Maximum transmission distance of 9/125 um single-mode fiber is 10 km

1000BASE-LH: wavelength 1310nm

Maximum transmission distance of 9/125 um single-mode fiber is 4 0km;

1000BASE-ZX: wavelength 1550nm

Maximum transmission distance of 9/125 um single-mode fiber is 50km and 80km;

10/100/1000BASE-T: maximum transmission distance of category-5 UTP or STP is 100 m

SIC module interface

RSR30-RCM44-512M-2GE coems with four SIC slots. Users can select corresponding functional modules as necessry.

For details, refer to Section Supplrted Modules List.

Introduction to SIC Modules

SIC-8A Interface Card

SIC module model: SIC-8A

Appearance and Indicators

Appearance of SIC-8A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ruijie Netzwerk-Router Handbücher

Ruijie

Ruijie Reyee RG-EG105GWT Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR77 Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-NBR-E Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW1200 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG V2 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR20-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW Series Anleitung zur Verwendung

Ruijie

Ruijie Reyee RG-EW1800GX PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-M18 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW Series Abmessungen

Ruijie

Ruijie Reyee RG-EG Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW3000GX PRO Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG105GW-X Installations- und Betriebsanleitung

Ruijie

Ruijie RG-EG210G-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG210G-E Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG300GH-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR77-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie RSR30-X-SPU10 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR20-X-28 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBR-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RSR10-01G Montageanleitung

Ruijie

Ruijie Reyee RG-EW3200GX PRO Bedienungsanleitung

Ruijie

Ruijie RG-MTFi-M520 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung