Ruijie Reyee RG-M18 Bedienungsanleitung

Reyee RG-M18 Mesh Router

1 - 6

7 - 11

12 - 17

18 - 23

24 - 29

30 - 35

36 - 41

42 - 47

Manual do utilizador 48 - 53

54 - 59

Benutzerhandbuch 60 - 65

Manuale d'uso 66 - 71

Manuel d'utilisation 72 - 77

RG-M18 Mesh Router

User Manual

Package Contents

Product Appearance

Reset Button Power WAN LAN1/LAN2

Router

Name Quantity

Power Adapter

Warranty Card

User Manual

Network Cable

Reyee Mesh Indicator

Status Description

Blinking white The device is being paired.

Four bars are solid white The Mesh network signal is excellent.

Three bars are solid white N/A

Two bars are solid white The Mesh network signal is average.

One bar is solid white The Mesh network signal is poor.

Off The Mesh network is disconnected or not

set up.

Status Description

Solid blue The device is working normally and can

access to the Internet

Solid orange The device does not access the Internet.

Blinking blue

The device is starting up or restoring the

factory settings.

System Status Indicator (Reyee Mesh Button)

Scenario 1: Configure one router to access the Internet

1.Connect the Power Cord and Ethernet Cable.

2. Configure the router.

After the power cord and Ethernet cable are connected,the router will complete startup in 2 to 3

minutes. Wait until the system status indicator turns solid on and the SSID is broadcast

(default SSID: @Ruijie-sXXXX).

XXXX is the last 4 digits of the MAC address on the label of router.

S/N: G1XXXXXXXXXXX

MAC: XXXXXXXXXXXX

3200M Wi-Fi 6 Dual-band Mesh Router

SSID :

Default Management Address: 192.168.110.1

https://www.ireyee.com/support

Model: RG-M32

Input: 12V 2.5A

Version: V1.00

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,and (2) this device must accept any interference

received, including interference that may cause undesired operation.

FCC ID: IC: CAN ICES-003 (B)/NMB-003(B)

Download Reyee Router

XXXX is the last 4 digits of the MAC address

on the nameplate of router .

S/N: G1XXXXXXXXXXX

MAC: XXXXXXXXXXXX

3200M Wi-Fi 6 Dual-band Mesh Router

SSID :

Default Management Address: 192.168.110.1

https://www.ireyee.com/support

Model: RG-M32

Input: 12V 2.5A

Version: V1.00

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,and (2) this device must accept any interference

received, including interference that may cause undesired operation.

FCC ID: IC: CAN ICES-003 (B)/NMB-003(B)

Download Reyee Router

@Ruijie-sXXXX

xxxxx-xxxxxxxx

Wi-Fi

xxxxx-xxxxxxxx

Access the Internet by Web

The router automatically detects the type of Internet connection.Please

configure the network parameters accordingly.

Connect to the new Wi-Fi name (SSID) after it appears in the Wi-Fi list for lnter-

net access.

For more information, please access https://www.ruijienetworks.com/support

Open your phone settings page and choose Wi-Fi network

@Ruijie-sXXXX. The configuration page will appear automatically. Or you

can access 192.168.110.1 via browser.

Access the Internet by App

Download the Reyee Router App Create an account

Tap , follow the guide of configuration

Scenario 2: Configuring multiple routers to set up a Reyee Mesh Network

To cover every corner of a penthouse, duplex house, or a villa , you can buy multiple

Reyee Mesh routers to form a wireless network for seamless roaming .Mesh routers

to form a mesh network for full-house coverage.

Please refer to Scenario 1 for configuration.

Wait for 2 to 3 minutes until the system status indicator on the secondary router turns

steady on.

2. Place the secondary router within 2 meters (around 6.56 ft)

from the primary router, and power it on

Connect the primary router to the Internet

3. Press the Reyee Mesh button on the primary router for pairing

The Reyee Mesh indicator on the primary router blinks white , indicating that the

primary router is searching nearby routers for pairing .The Reyee Mesh indicator

on the secondary router also blinks white , indicating the secondary router is

being paired with the primary router.

After about 2 minutes, the Reyee Mesh indicators on both routers turn steady

white . The default Wi-Fi on the secondary router disappears, and the Wi-Fi name

and password are synchronized with the primary router, indicating that the pairing

is complete .

4. Move the secondary router to an area where Wi-Fi coverage is

required , and power it on again

Reyee Mesh Button

Please find the proper location for both routers. Do not place two routers too far

away from each other and avoid too many walls or other obstacles between them.

Determine the placement and distance by referring to the signal strength visualized

by Reyee Mesh indicators on the top.

If you have three or more routers, you can repeat step 2 to 4 to connect them . A

Reyee Mesh network consists of up to five routers (one primary router and four

secondary routers).

FAQs

What can I do if I forget the management password?

Try the Wi-Fi password which may be the same as the management password.

If it does not work, please restore the device to factory settings.

How to restore the factory settings?

Power on the router and wait for 2 to 3 minutes until it is started. Use

a pin to press and hold the Reset button on the rear side for over 10 seconds until

the system status indicator starts blinking, and then release the button.

After the system status indicator turns solid on, the router will broadcast SSID

@Ruijie-sXXXX,

indicating that the router is restored to factory settings successfully.

Can I connect routers with Ethernet cables?

Yes, and wired connection is more stable. Insert one end of the Ethernet cable

into the WAN port (yellow) of the secondary router and connect the other end

to the LAN port (black) of the primary router.

WAN LAN1/LAN2

N/A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Ruijie Netzwerk-Router Handbücher

Ruijie

Ruijie Reyee RG-EW Series Anleitung zur Verwendung

Ruijie

Ruijie Reyee RG-EG209GS Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG Series Bedienungsanleitung

Ruijie

Ruijie RG-R SR30 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW3000GX PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-NBR-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG210G-E Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG105GWT Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR20-14E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RSR30-X-SPU10 Installations- und Betriebsanleitung

Ruijie

Ruijie RSR10-01G Montageanleitung

Ruijie

Ruijie Reyee RG-EW1800GX PRO Bedienungsanleitung

Ruijie

Ruijie RG-RSR30-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie RSR10-01G-T-I Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-MTFi-M520 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW3000GX PRO Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG300GH-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW1300G Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG V2 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW Series Abmessungen

Ruijie

Ruijie RG-S6200 Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG105GW-X Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR77 Series Betriebsanleitung

Ruijie

Ruijie RG-RSR20-X-28 Series Installations- und Betriebsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung