Ruijie RG-IF2920U-12GT1XS Series Installations- und Betriebsanleitung

RG-IF2920U-12GT1XS

Series Switch

Hardware Installation and Reference Guide

Document version: V2.0

Date: 2023-05-24

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document

or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks

is prohibited.

Trademark and are owned by Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms, and some or

all of the products, services, or features described in this document may not be available for you to purchase or

use. Except for the agreement in the contract, Ruijie Networks makes no explicit or implicit statements or

warranties with respect to the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from time to

time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder

any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks website: https://www.ruijienetworks.com/

Technical support website: https://ruijienetworks.com/support

Case portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical support email: s[email protected]

Live chat: https://www.ruijienetworks.com/rita

Conventions

1. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or followed can result in

data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed can result in function

failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or followed will not lead to

serious consequences.

Specification

An alert that contains a description of product or version support.

2. Note

The manual offers configuration information (including model, port type and command line interface) for indicative

purpose only. In case of any discrepancy or inconsistency between the manual and the actual version, the actual

version prevails.

Hardware Installation and Reference Guide Product Description

1 Product Description

The RG-IF2920U-12GT1XS is the simplified optical Ethernet (SOE) switch released by Ruijie Networks for all-

optical network scenarios. It uses the new hardware architecture, and silent and energy-saving design. It can

be flexibly installed and suitable for indoor scenarios. With Ruijie's modular OS, the RG-IF2920U-12GT1XS is

fit for the SOE solution, and implements lifecycle management, security control, plug and play, and intelligent

O&M through software-defined networking (SDN).

Table 1-1 Ports of the RG-IF2920U-12GT1XS

Model

10/100/1000M

Base-T Ethernet

Electrical Port

2.5G/1G

BASE-T

Ethernet

Electrical

Port

SFP

Port

2.5G SFP

Port

SFP+

Port

Console

Port

RG-IF2920U-

12GT1XS

N/A

Note

SFP+ ports are downward compatible with 1000Base-X ports.

1000Base-T ports are downward compatible with 100Base-T and 10Base-T ports.

Table 1-2 Configuration of the RG-IF2920U-12GT1XS

Model

Dimensions (W x D x H)

Cooling

RG-IF2920U-12GT1XS

240 mm x 86 mm x 38 mm (9.45 in.

x 3.39 in. x 1.50 in.)

Natural heat dissipation for fanless

design

1.2 RG-IF2920U-12GT1XS

1.2.1 Technical Specifications

Table 1-3 Technical Specifications of the RG-IF2920U-12GT1XS

Model

RG-IF2920U-12GT1XS

Supported Optical

Module

See Appendix B.

The supported optical module types may update without prior notification. Please

contact Ruijie Networks for any updates.

SFP+ Port

10GBase-X and 1000Base-X

Hardware Installation and Reference Guide Product Description

Power Supply

Adapter power supply:

Power adapter input

○Rated voltage range: 100 V to 240 V

○Maximum voltage range: 90 V to 264 V

○Rated frequency: 50/60 Hz

Power adapter output (DC)

○Rated voltage: 12 V

○Rated current: 1.0 A

Energy Efficient

Ethernet (EEE)

Supported

Maximum Power

Consumption

10 W

Operating

Temperature

Desktop deployment: 0ºC to 40ºC (32°F to 104°F) at the altitude between 0 m to

1,800 m (0 ft. to 5905.51 ft.)

Deployment under the desktop, wall-mounting, and pole-mounting: 0ºC to 45ºC

(32°F to 113°F) at the altitude between 0 m to 1,800 m (0 ft. to 5905.51 ft.)

At the altitude between 1,800 m (5905.51 ft.) and 5,000 m (16404.2 ft.), every

time the altitude increases by 220 m (721.79 ft.), the maximum temperature

decreases by 1°C (1.8°F).

Storage Temperature

–40°C to +70°C (–40°F to +158°F)

Operating Humidity

10% to 90% RH (non-condensing)

Storage Humidity

5% to 95% RH (non-condensing)

Fan Module

Natural heat dissipation for fanless design

Intelligent

Temperature Control

Temperature alarm and overheat protection

EMC Standard

GB/T 9254.1

Safety Standard

GB 4943.1

Dimensions (W x D x

240 mm x 86 mm x 38 mm (9.45 in. x 3.39 in. x 1.50 in.)

Weight

0.86 kg (1.90 lbs) (including the package)

Warning

The RG-IF2920U-12GT1XS is a Class Aproduct. In a domestic environment, this product may cause radio

interference in which case the user may be required to take adequate measures.

Hardware Installation and Reference Guide Product Description

1.2.2 Product Appearance

The RG-IF2920U-12GT1XS provides 12 x 10/100/1000M Base-T Ethernet electrical ports and 1 x 10G SFP+

port.

Figure 1-2 Appearance of the RG-IF2920U-12GT1XS

1. Front Panel

Figure 1-3 Front Panel of the RG-IF2920U-12GT1XS

Note:

1. Console port (internal

debugging)

2. Switch status LED

3. Optical port LED

Hardware Installation and Reference Guide Product Description

2. Middle Frame Panel

Figure 1-4 Middle Frame Panel of the RG-IF2920U-12GT1XS

3. Top Cover

Note:

1. SFP+ port

2. Nameplate

4. Reset Button

The RG-IF2920U-12GT1XS provides one Reset button. When you press this button for more than 5s, the device

restores to factory defaults and restarts.

Note:

1. Power port 12 V/1 A

2. Reset button

3. 10/100/1000Base-T Ethernet port with auto-

negotiation

4. Ethernet port LED

Hardware Installation and Reference Guide Product Description

5. Heat Dissipation

The RG-IF2920U-12GT1XS adopts natural heat dissipation to ensure that it works properly in a specified

environment. For the RG-IF2920U-12GT1XS, maintain sufficient clearance on both sides of the chassis and

above the chassis for air circulation. Dust the device every three months to avoid blocking ventilation openings

on the housing.

6. LEDs

Table 1-4 LEDs

LED

Panel

Identification

Status

Description

Status LED

Status

Off

The switch is not powered on.

Blinking green

The switch is being initialized. If the

LED blinks continuously, a fault occurs.

Solid green

The switch works properly.

Solid yellow

A switch temperature alarm is

generated. Check the operating

environment of the switch.

Solid red

The switch fails.

Electrical port

LED

1–12

Off

The port is not connected.

Solid green

The port works at the rate of

10/100/1000 Mbps.

Blinking green

The port is sending or receiving data at

the rate of 10/100/1000 Mbps.

Optical port

LED

SFP+

Off

The port is not connected.

Solid green

The port is connected.

Blinking green

The port is sending or receiving data.

Solid red

An error occurs when the optical

module sends signals.

Solid yellow

An error occurs when the optical

module receives signals.

Hardware Installation and Reference Guide Preparing for Installation

2 Preparing for Installation

2.1 Safety Precautions

Warning

To avoid personal injury and device damage, carefully read the safety precautions before you install the

RG-IF2920U-12GT1XS.

The following safety precautions may not cover all possible dangers.

2.1.1 Mounting

Keep the chassis clean and dust-free.

Do not place the device in a walking area.

During installation and maintenance, do not wear loose clothes, ornaments, or any other things that may be

hooked by the chassis.

Cut off all the power supplies and unplug all power cords before handling the switch.

2.1.2 Handling

Avoid handling the device frequently.

Keep balance and prevent personal injuries when handling the device.

Cut off all the power supplies and unplug all power cords before moving or handling the switch. Avoid scalds

because the housing surface is hot.

2.1.3 Electricity

Observe local regulations and specifications during electric operations. Only qualified personnel can perform

such operations.

Before installing the device, check whether there are hidden risks in the operating environment of the device.

For example, check whether the power socket is grounded and whether the ground is wet.

Determine the location of the indoor emergency power supply switch before installing the device. When an

accident occurs, immediately cut off all power supplies.

Do not maintain the device by yourself when the device is powered on.

Make sure that the device is powered off when you cut off the power supply.

Do not place the switch in a wet position, and keep the switch away from liquid.

Warning

Improper or incorrect electric operations may cause a fire, electric shock, and other accidents, and lead

to severe and fatal personal injury and device damage.

Direct or indirect contact through wet objects with high voltage or mains power supply may be fatal.

When this device is running, the surface temperature of the top cover is high. Install and use it in the area

that can only be accessed by maintenance personnel or skilled technicians.

Hardware Installation and Reference Guide Preparing for Installation

2.1.4 ESD

To prevent damage caused by static electricity, pay attention to the following points:

Keep the indoor installation environment clean and dust-free.

Keep the indoor humidity within a certain range.

2.1.5 Laser

The RG-IF2920U-12GT1XS supports various types of optical transceivers available in the market, and these

optical transceiver are Class I laser products. Improper use of an optical transceiver may cause damage.

Therefore, pay attention to the following:

When a fiber transceiver works, ensure that the port has been connected with a fiber or covered by a dust cap

to keep out dust and prevent it from burning your eyes.

When an optical transceiver is working, do not look into its port after removing the optical fiber. Otherwise, your

eyes may be hurt.

Warning

Do not approach or look into any optical port under any circumstances. This may cause permanent damage to

your eyes.

2.1.6 Storage

To ensure proper working of the device, store the device in an environment based on the storage temperature or

humidity requirements in specifications.

Caution

If the device has been powered off for more than 18 months, power on the device and run it for consecutive 24

hours to activate the device.

2.2 Installation Site Requirements

The installation site must meet the following requirements to ensure the normal operation and prolonged service

life of the device.

2.2.1 Ventilation

For the RG-IF2920U-12GT1XS, maintain sufficient clearance on both sides of the chassis and above the chassis

for air circulation. After various cables are connected, bind the cables or place them in the cable management

bracket to avoid blocking air inlets. Dust the device every three months to avoid blocking the ventilation openings

on the housing.

The RG-IF2920U-12GT1XS uses natural heat dissipation, and the heat is primarily dissipated through the

housing. The surface temperature of the device is high. It is crucial to install the device in a restricted-access

area that offers sufficient ventilation.

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie RG-ES1 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS1805C-P Bedienungsanleitung

Ruijie

Ruijie RG-ES126S-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6220-48XS6QXS-H Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS86-20XS Series Installations- und Betriebsanleitung

Ruijie

Ruijie 5310-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-N18000-XH Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NIS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S1808 Installations- und Betriebsanleitung

Ruijie

Ruijie S8600E Series Betriebsanleitung

Ruijie

Ruijie RG-NIS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1960-48GT4SFP-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie RGOS 11.X Bedienungsanleitung

Ruijie

Ruijie RG-S5310-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS6002 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S1920 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES200 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6110 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6120 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-EG210G-P Bedienungsanleitung

Ruijie

Ruijie Reyee RG-NBS3100-48GT4SFP-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-SF2920 Series Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1960-10GT2SFP-P-H Installations- und Betriebsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung