Ruijie RG-S5750-S Series Installations- und Betriebsanleitung

RG-S5750-S Series Switch

Hardware Installation and Reference Guide V1.15

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

, , , , ,

, ,, ,

, , are registered trademarks of Ruijie Networks.

Counterfeit is strictly prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

This manual describes the functional and physical features and provides the device installation steps, hardware

troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time,

it is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks website: http://www.ruijienetworks.com/

Online customer services: http://webchat.ruijie.com.cn

Customer service center: http://www.ruijie.com.cn/service.aspx

Customer services hotline: +86-4008-111-000

BBS:

http://support.ruijie.com.cn

Customer services email: Consulting@ruijienetworks.com

Related Documents

Documents Description

Configuration Guide Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage

or loss of data.

Chapter 1 Product Overview

The RG-S5750-S series switches are the next generation Layer 3 switches introduced by Ruijie Networks. Featuring high

performance, reliable security, and multiple services, the RG-S5750-S series switches are mainly applicable to the

convergence layer of large-scale networks to provide full wire-speed exchanging and complete QoS services, classify

different services according to different business needs and ensure the prompt transmission of key data. The

RG-S5750-S series switches can provide various medium interfaces to meet the requirement for interfaces in network

constructions.

RG-S5750-S Series Switches

Table1-1

Model

10/100/1000Base-T

adaptive Ethernet

port

1000Base-X

SFP port

Console

Port

USB

Port

Extension

Module

Slot

Redundant

Power

Supply

RG-S5750-24GT/8SFP-S 24 8 (Combo) 1 0 2 RPS

RG-S5750-48GT/4SFP-S 48 4 (Combo) 1 0 2 RPS

RG-S5750-24SFP/8GT-S 8 (combo) 24 1 1 2 Dual power

supplies

RG-S5750-24GT/8SFP-S

Technical Specifications

Table1-2

Model RG-S5750-24GT/8SFP-S

Optical Module

Type

Ethernet 100M:

FE-SFP-LX-MM1310

FE-SFP-LH15-SM1310

FE-SFP-LX20-SM1310-BIDI

FE-SFP-LX20-SM1550-BIDI

FE-SFP-LH40-SM1310-BIDI

FE-SFP-LH40-SM1550-BIDI

Ethernet 1000M:

Mini-GBIC-SX

Mini-GBIC-LX

Mini-GBIC-LH40

GE-SFP-LX20-SM1310-BIDI

GE-SFP-LX20-SM1550-BIDI

GE-SFP-LH40-SM1310-BIDI

GE-SFP-LH40-SM1550-BIDI

Mini-GBIC-ZX50

Mini-GBIC-ZX80

Mini-GBIC-ZX100

1000Base-T:

Mini-GBIC-GT

The supported module type may change at any time. For the detailed change

information, consult the Ruijie Networks.

The Bi-Directional (BIDI) optical modules must be used in pairs. For details about

the pairs of BIDI modules, see the Appendix B.

Extended Module

Type

M5000E-02SFP/GT

M5000E-01XS

M5000E-02XS

SFP Port 100Base-X

1000Base-X

RPS Type RG-RPS150

Power Supply AC input:

Rated voltage range: 100–240 V AC

Maximum voltage range: 90–264 V AC

Frequency: 50/60 Hz

Rated current: 1.5 A

HVDC input:

Voltage range: 192–290 V DC

Current range: 0.5–0.24 A

Max. Power

Consumption

58 W (with extension modules); 42 W (without extension modules)

Temperature Working temperature: 0–50ºC

Storage temperature: -40–70ºC

Humidity Working humidity: 10%–90% RH

Storage humidity: 5%–90% RH

Fan Support adjustment of fan speed and warning of fan trouble.

Temperature

Warning Temperature warning function

EMC GB9254-2008

Security

Compliance

GB4943-2011

Dimensions

(W x D x H)

440 mm x 260 mm x 44 mm

Weight 4.6 kg (with extension modules); 3.6 kg (without extension modules)

RG-S5750-24GT/8SFP-S switch is a class A product. In a domestic environment, this product may cause

radio interference in which case the user may be required to take adequate measures.

Product Appearance

The front panel of the RG-S5750-24GT/8SFP-S Ethernet switch provides twenty four 10/100/1000Base-T Ethernet ports,

eight 1000M SFP fiber/copper combo ports, one Console port and one USB port. The back panel provides AC power input

ports, RPS input ports and two extension module slots.

Figure 1-1 Appearance of the RG-S5750-24GT/8SFP-S

Front Panel

Figure 1-2 RG-S5750-24GT/8SFP-S Front Panel

Note: 1. Switch status indicator

2. Extension module 1 status indicator

3. Extension module 2 status indicator

4. RPS status indicator

5. Console port

6. 10/100/1000Base-T adaptive Ethernet port

7. Port status indicator

8. 100/1000Base-X SFP port

9. USB port

Back Panel

Figure 1-3 RG-S5750-24GT/8SFP-S Back Panel

Note: 1. Grounding pole

2. 3-core AC power port

3. Power defense shedding plug

4. RPS input port

5. Slot for extension module 1

6. slot for Extension module 2

Power Supply System

The RG-S5750-24GT/8SFP-S adopts the AC power input and RPS input.

AC input:

Rated voltage range: 100–240 V AC

Maximum voltage range: 90–264V AC

Frequency: 50/60 Hz

Rated current: 1.5 A

Power cable: 10 A power cable

HVDC input:

Voltage range: 192–290 V DC

Current range: 0.5–0.24 A

RPS input:

The switch power can be supplied by the redundant power input or both the AC input and redundant power input.

When both the AC input and the redundant power input are available, the switch power is supplied by the AC power

input;

When the AC input is unavailable, the switch power supply switches to the redundant power input seamlessly.

At present, the redundant power supply interface can be used together with the RPS150 that are

manufactured by Ruijie Networks. Unless otherwise stated, other power supply modules cannot be used for

power input; otherwise, an abnormality may occur or damage the switch.

Cooling System

The RG-S5750-24GT/8SFP-S is designed with left and right fans for heat dissipation purposes, thereby ensuring the

device's functioning in the specified environment. Sufficient space (10 cm distance from both sides and the backplane of

the cabinet) should be reserved to allow air circulation. Dust the device every three months to avoid blocking the

ventilation openings.

Figure 1-4 Flow Scheme of Heat Dissipation

LED Indicators

Table1-4

Indicator Panel Identification Status Meaning

Off The switch is not powered on.

Blinking green The switch is being initialized. If the blinking

persists, however, it indicates that an

abnormality occurs.

Solid green The switch is operational.

Solid yellow It indicates a warning on the switch temperature.

Check the working environment of the switch

immediately.

Status indicator Status

Solid red Indicates a fault on the switch. For details, refer

to Section 5.2 Troubleshooting Common Faults.

Off There is no extension module or the extension

module is not correctly installed.

Extension module

indicator M1 / M2

Solid green The extension module is correctly installed.

Off The redundant power is not connected to a link.

Solid green The redundant power is connected and can

supply power.

Solid yellow The redundant power is supplying power.

RPS status indicator

RPS

Solid red The redundant power is connected but cannot

supply power.

Off No link, or port was administratively shut down.

Solid green The 1000 M link that the port connects to is Up.

Blinking green Data at a rate of 1000 M are being transceived at

the port.

Solid yellow The 100 M link that the port connects to is Up.

1000Mbps SFP port

indicator

21F-24F

Blinking yellow Data at a rate of 100 M are being transceived at

the port.

Indicator Panel Identification Status Meaning

Off No link, or port was administratively shut down.

Solid green The 1000 M link that the port connects to is Up.

Blinking green Data at a rate of 1000 M are being transceived at

the port.

Solid yellow The 100 or 10 M link that the port connects to is

Up.

1000Mbps RJ-45

port indicator

1-24

Blinking yellow Data at a rate of 100 or 10 M are being

transceived at the port.

RG-S5750-48GT/4SFP-S

Technical Specifications

Table1-5

Model RG-S5750-48GT/4SFP-S

Optical Module

Type

Ethernet 100 MB:

FE-SFP-LX-MM1310

FE-SFP-LH15-SM1310

FE-SFP-LX20-SM1310-BIDI

FE-SFP-LX20-SM1550-BIDI

FE-SFP-LH40-SM1310-BIDI

FE-SFP-LH40-SM1550-BIDI

Ethernet 1000 MB:

Mini-GBIC-SX

Mini-GBIC-LX

Mini-GBIC-LH40

GE-SFP-LX20-SM1310-BIDI

GE-SFP-LX20-SM1550-BIDI

GE-SFP-LH40-SM1310-BIDI

GE-SFP-LH40-SM1550-BIDI

Mini-GBIC-ZX50

Mini-GBIC-ZX80

Mini-GBIC-ZX100

1000Base-T:

Mini-GBIC-GT

The supported module type may change at any time. For the detailed change

information, consult the Ruijie Networks.

The Bi-Directional (BIDI) optical modules must be used in pairs. For details about

the pairs of BIDI modules, see the Appendix B.

Extended Module

Type

M5000E-02SFP/GT

M5000E-01XS

M5000E-02XS

SFP Port 100Base-X

1000Base-X

RPS Type RG-RPS150

Power Supply AC input:

Rated voltage range: 100–240 V AC

Maximum voltage range: 90–264 V AC

Frequency: 50/60 Hz

Rated current: 2 A

HVDC input:

Voltage range: 192–290 V DC

Current range: 0.7–0.5 A

Max. Power

Consumption

82 W (with extension modules); 66 W (without extension modules)

Temperature Working temperature: 0–50ºC

Storage temperature: -40–70ºC

Humidity Working humidity: 10%–90% RH

Storage humidity: 5%–90% RH

Fan Support fan speed adjustment and the fault warning function

Temperature

Warning

Support the temperature warning function

EMC GB9254-2008

Security

Compliance

GB4943-2011

Dimensions

(W x D x H)

440 mm x 300 mm x 44 mm

Weight 5.2 kg (with extension modules); 4.2 kg (without extension modules)

RG-S5750-48GT/4SFP-S switch is a class A product. In a domestic environment, this product may cause

radio interference in which case the user may be required to take adequate measures.

Product Appearance

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie RG-S29 Series Installationshandbuch

Ruijie

Ruijie Reyee RG-NBS Series Bedienungsanleitung

Ruijie

Ruijie RG-ES100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie S5750 Series Bedienungsanleitung

Ruijie

Ruijie RG-S6580-48CQ8QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2600G-I Series Bedienungsanleitung

Ruijie

Ruijie RG-PF2920U-4GT1MS-P Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-48VS8CQ Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES126S-P Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS5200-24GT4XS-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS88-08 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6580-48CQ8QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6980-64QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S3760E Series Bedienungsanleitung

Ruijie

Ruijie RG-S6910-3C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-32CQ Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES1 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6580-24DC8QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NIS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-ES126S-P V2 Bedienungsanleitung

Ruijie

Ruijie RG-S2910-24GT4SFP-UP-H Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6910-3C Series Installations- und Betriebsanleitung

Ruijie

Ruijie HS2310-16GH2GT1XS Installations- und Betriebsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung