Safety Vision OBSERVER 4120 Bedienungsanleitung

OBSERVER™ 4120

USER GUIDE

Important Notices

Title: Observer™4120 User Guide

Document Version: 2.2

Safety Vision attempts to provide information contained

in this manual based on the latest product information

available at the time of publication. However, because of

Safety Vision’s policy of continual product improvement,

Safety Vision reserves the right to amend the information in

this document at any time without prior notice.

This material is condential and the property of Safety

Vision. It is shared with your company for the sole purpose

of helping you with the operation of the described

equipment.

Safety Vision makes no warranty of any kind with regard

to this material, including, but not limited to, the implied

warranties of merchantability and tness for a particular

purpose. Safety Vision shall not be liable for errors

contained herein or for incidental or consequential damages

in connection with the furnishing, performance, or use of

this material.

Safety Vision expressly disclaims all responsibility and

liability for the installation, use, performance, maintenance,

and support of third-party products. Customers are advised

to make their independent evaluation of such products.

No part of this document may be photocopied, reproduced,

or translated to another language without the prior written

consent of Safety Vision.

Safety Vision® is a registered trademark of Safety Vision, LLC. All

other products or name brands mentioned in this document are

trademarks of their respective owners. For more information

about Safety Vision and its products, go to www.

safetyvision.com or call 800-880-8855.

OBSERVER SERIES USER GUIDE

Table of Contents

Main Wiring Diagram 2

Installation 4

Hard Drive Removal 5

SD Card Removal/Insertion 5

Components 6

SV-CP4-HYB

Touch Screen Monitor 8

Remote Control 9

Recording Search 11

System 14

Version Info 14

Modules 15

Server Status 16

Environment 17

Storage 18

Log Search 19

Setup 21

Time Setup 22

Startup 23

User Setup 24

Network 25

Application 27

Live View 28

Record 30

IPC Setup 32

General 33

General 35

Cong 37

Data Export 38

Upgrade 39

Storage 40

Reset 41

Web Conguration 42

Appendix A: Specications 46

Appendix B: Dimensions 47

OBSERVER 4120 USER GUIDE 1

Main Wiring Diagram

Wiring Harness Connections

Recommended Sensor

Connections (12V)

Sensor 8 Stop Arm Lights (school bus)

Sensor 7 Amber Warning Lights (school bus)

Sensor 6 Door (or wheel chair lift)

Sensor 5 Head Lights

Sensor 4 Event Button

Sensor 3 Brake Lights

Sensor 2 Left Turn Signal

Sensor 1 Right Turn Signal

Power Harness

Red Power (12 - 32V DC)

Black Ground

White Ignition (Yellow on some models)

OBSERVER 4120 USER GUIDE

[this page intentionally left blank]

OBSERVER 4120 USER GUIDE 3

OBSERVER 4120 USER GUIDE

Installation

The Observer 4120 is shipped with a base containing an

integrated cooling fan. Ensure the cooling fan power cable

is connected to the cooling fan power port.

Remove the Security Cover and open the faceplate as

described on the following page. Secure the 4120 to a at

surface using appropriate fasteners.

Ensure that the front panel of the HVR remains accessible,

there is a minimum 2.5 inches of clearance for cables, and

there is adequate space to provide air for the cooling fan.

Do not install the HVR in an area of the vehicle cabin that

could interfere with the safe operation of the vehicle.

Security Cover

After connecting all needed cables to the rear of the DVR

as shown in the Main Wiring Diagram, secure the Security

Cover with the included screws as shown in the diagram.

OBSERVER 4120 USER GUIDE

Hard Drive Removal

To remove the hard drive from the HVR:

1. Ensure the HVR is powered o.

2. Insert the key into the faceplate

lock and turn it clockwise.

3. Open the faceplate latch on the

right side of the HVR.

4. Pull the hard drive rmly and

straight out.

SD Card Removal/Insertion

The SD card can only be accessed when

the faceplate is open.

Do not force the SD card into the slot

upside down or backwards.

Ensure the SD card’s write protection

slider is in the “unlocked” position.

1. Open the SD card slot door from

the left edge.

2. Insert an SD card into the SD card

slot label-side up, with the notch to

the right, until it clicks in place.

To remove the SD card, press the SD

card as far as it will go in the slot, then

allow it to “spring” out.

3. Close the SD card slot door.

To reinsert a hard drive:

1. Push the hard drive rmly all the

way into the DVR.

2. Secure the faceplate latch.

3. Insert the key into the hard drive

lock and turn it counter-clockwise.

OBSERVER 4120 USER GUIDE 5

OBSERVER 4120 USER GUIDE

Components

1 - Removable Hard Drive - The hard disk drive (HDD)

provides the main storage for recorded data.

2 - Status LEDs - The Status LEDs illuminate to display the

current status of the HVR. See chart at right.

3 - IR Receiver - Point the remote control at the IR

receiver to enter commands and change settings in the

conguration menus.

4 - USB Port - Insert a USB ash drive to download events

quickly without having to remove the SD card or hard drive,

can also upload rmware updates and conguration les.

5 - SD Card Slot - Insert an SD card into the slot until

it clicks. To remove the SD card, briey press it in until it

ejects.

STATUS LEDS

NUMBER LABEL LED COLOR DESCRIPTION

1PWR BLUE Power

2VLOSS RED Video Loss

3AUX RED

4REC YELLOW Recording

5ERR ORANGE Error

6LAN YELLOW Network Activity

6OBSERVER 4120 USER GUIDE

1 - Power Port - Connection for the UPS and main power

harness.

2 - Serial Port - Connection for the I/O hub and ALM

extender harness.

3 - Panel Port - Connection for the SV-CP4-HYB monitor.

4 - USB Port - Connection for optional USB accessories

including the Fireproof back-up data box.

5 - LAN 1 Port (RJ45) - Connection for optional network

accessories.

6 - LAN 2 Port (RJ45) - Connection for the POE

Smart Switch IP camera hub. The Smart Switch MUST be

connected to the LAN 2 port.

7 - GPS Antenna Port - Connection for the external

antenna to accompany the internal GPS module.

8 - Fan Power Port - Power connection for the fan

integrated into the base.

9/10 - AV Port(s) - Connections for the analog camera

wiring harnesses.

OBSERVER 4120 USER GUIDE 7

SV-CP4-HYB

Touch Screen Monitor

To make selections using the SV-CP4-HYB monitor, simply

tap on the touch screen. Do not exert excessive force on the

screen.

Tap the screen once to display the shortcut bar. Use the

shortcut bar to display a single screen or a quad-view. Tap

Playback or System to access video playback or system

settings, respectively. Tap the Log In icon to log in and

access the Home screen. While browsing menus:

Tap the Home key to return to the Main Menu.

Tap the Return key to return to the previous menu.

The SV-CP4-HYB monitor incorporates the functionality of a

remote control. Buttons on the monitor are functionally the

same as the remote control buttons described on the next

page.

The SV-CP4-HYB monitor also provides an IR receiver for the

remote control. When using the remote control, ensure it

is pointed at either the IR receiver on the monitor or the IR

receiver on the front of the HVR.

Additionally, the SV-CP4-HYB monitor provides two

additional buttons on the left side of the control panel. The

blank black button toggles between dim and bright monitor

brightnesses for day or night. The red PB button provides

Panic Button functionality.

8OBSERVER 4120 USER GUIDE

Andere Handbücher für OBSERVER 4120

Inhaltsverzeichnis

Andere Safety Vision DVR Handbücher

Safety Vision

Safety Vision SV-1600 Bedienungsanleitung

Safety Vision

Safety Vision OBSERVER 4816-NVR Installationshandbuch

Safety Vision

Safety Vision SVR-4100 Bedienungsanleitung

Safety Vision

Safety Vision ROADRECORDER 8000 Original Betriebsanleitung

Safety Vision

Safety Vision OBSERVER 4401-HVR Installationshandbuch

Safety Vision

Safety Vision OBSERVER 4100 Bedienungsanleitung

Safety Vision

Safety Vision SVR-4401-3C Bedienungsanleitung

Safety Vision

Safety Vision OBSERVER 4112 HVR Bedienungsanleitung

Safety Vision

Safety Vision OBSERVER 4120 Installationshandbuch

Safety Vision

Safety Vision RoadRecorder 7000 Bedienungsanleitung

Safety Vision

Safety Vision RouteRecorder 4C SD SS Bedienungsanleitung

Safety Vision

Safety Vision OBSERVER 4100 HVR Bedienungsanleitung

Safety Vision

Safety Vision ICOP PRO HD HVR Bedienungsanleitung

Safety Vision

Safety Vision RoadRecorder 9000 Bedienungsanleitung

Safety Vision

Safety Vision SV-1000 Bedienungsanleitung

Safety Vision

Safety Vision Observer 4000 Bedienungsanleitung

Safety Vision

Safety Vision OBSERVER 4116 Installationshandbuch

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung