Samsung NETWORK DIGITAL VIDEO RECORDER Bedienungsanleitung

USER MANUAL

4 CHANNELS NETWORK

DIGITAL VIDEO RECORDER

INSTRUCTION MANUAL

To obtain the best performance and ensure device function correctly, please read this

instruction manual carefully and completely.

FCC Compliance

USER-INSTALLER CAUTION: YOUR AUTHORITY TO OPERATE THIS FCC

VERIFIED EQUIPMENT COULD BE VOIDED IF YOU MAKE CHANGES OR

MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE

FOR COMPLIANCE TO PART 15 OF THE FCC RULES.

NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH

THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE

FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE

PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS

OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT

GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF

NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION

MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO

COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO

CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE

REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE

CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.

iii

Warnings and Cautions

WARINGS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MISTURE.

DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to

alert the user to the presence of insinuated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instruction in the

literature accompanying the product.

USERS OF THE SYSTEM ARE RESPONSIBLE FOR CHECKING AND COMPLYING WITH ALL

FEDERAL, STATE, AND LOCAL LAWS AND STATUTES CONCERNING THE MONITORING AND

RECORDING OF VIDEO AND AUDIO SIGNALS. ULTRAK SHALL NOT BE HELD RESPONSIBLE

FOR THE USE OF THIS SYSTEM IN VIOLATION OF CURRENT LAWS AND STATUTES.

TABLE OF CONTENTS

CHAPTER 1 INTRODUCTION ------------------------------------------------------------------------------------------ 1

FEATURE ---------------------------------------------------------------------------------------------------------- 1

CHAPTER 2 HARDWARE OVERVIEW ------------------------------------------------------------------------------ 2

CHAPTER 3 SETUP PROCEDURES --------------------------------------------------------------------------------- 4

1. MAIN MENU SETUP ----------------------------------------------------------------------------------------- 4

2. SYSTEM SETUP --------------------------------------------------------------------------------------------- 4

3. CAMERA SETUP --------------------------------------------------------------------------------------------- 5

4. RECORD SETUP --------------------------------------------------------------------------------------------- 5

5. SCHDULED RECORD -------------------------------------------------------------------------------------- 6

6. EVENT LIST ---------------------------------------------------------------------------------------------------- 6

7. HDD MANAGEMENT ---------------------------------------------------------------------------------------- 7

8. LOAD DEFAULT ---------------------------------------------------------------------------------------------- 8

9. EXIT -------------------------------------------------------------------------------------------------------------- 8

CHARPTER 4 OPERATION PROCEDURES ----------------------------------------------------------------------- 9

1. GETTING STARTED WITH YOUR MACHINE -------------------------------------------------------- 9

2. RECORDING -------------------------------------------------------------------------------------------------- 9

3. PLAYBACK ----------------------------------------------------------------------------------------------------- 9

4. HARD DISK and CF Card RECOMMEND ------------------------------------------------------------- 10

5. BACKUP -------------------------------------------------------------------------------------------------------- 11

6. ALARM CONTROL ------------------------------------------------------------------------------------------- 12

7. EXTERNAL ALARM CONNECTOR ---------------------------------------------------------------------- 12

8. NETWORK ----------------------------------------------------------------------------------------------------- 13

SPECIFICATIONS ------------------------------------------------------------------------------------------------- 13

CHAPTER 5 RECORDING TIME LENGTH ------------------------------------------------------------------------- 14

CHAPTER 6 HARD DRIVE INSTALLATION PROCEDURES -------------------------------------------------- 15

V1.02 2004/11/04

SETUP MENU List

SYSTEM SETUP

BUZZER DURATION 3 SEC

VIDEO LOSS ALARM ON

HDD PASSWORD

SET TIME/DATE

EXIT

CAMERA SETUP

CAMERA SELECT CH1

CAMERA RECORD ON

MOTION DETECTION ON

MOTION SENSITIVITY 5

BRIGHTNESS STANDARD

CONTRAST STANDARD

HUE STANDARD

EXIT

RECORD SETUP

RECORD MODE MUX

NORMAL RECORD FPS 15P

ALARM RECORD FPS 15P

ALARM REXORD DWELL 5 SEC

RECORD QUALITY HIGH

MOTION EVENT MIGRATION OFF

EXIT

SCHEDULE RECORD

O O O O O O O O O O O O O O O O O -

：　　：　　：　　：　：　　：

0 3 6 9 12 15 18 21 24

PRESS [UP，DOWN] TO SELECT

PRESS [ENTER] TO SET， [MENU] TO EXIT

EVENT LIST

MASTER HARD DRIVE

> 01 2003/AUG/25 12:13:16 REC

02 2003/AUG/25 11:14:21 PWR

03 2003/AUG/25 11:14:00 MOT CH3

04 2003/AUG/25 09:35:24 ALM CH1

HDD MANAGEMENT

OVERWRITE MODE NO

HDD FULL WARNING 10%

MASTER HDD CAPACITY 239GB

MASETR HDD LEFT RATIO 209GB 88%

MASTER HDD FORMAT

SLAVE HDD CAPACITY N/A

SLAVE HDD LEFT RATIO N/A

SLAVE HDD FORMAT

EXIT

SETUP MENU

SYSTEM SETUP

CAMERA SETUP

RECORD SETUP

SCHEDULE RECORD

EVENT LIST

HDD MANAGEMENT

LOAD DEFAULT

EXIT

CHAPTER 1

INTRODUCTION

This product is 4 cameras input appliance with multiple function which will bring you following features:

zDevice can be performed as VHS system with live display, play back and video recording。

zDevice operates in hardware base with no OS (operating system) necessary for more reliability and

stability。

zDigitize data storage with M-JPEG compression technology will give you organized video data

management without using mess huge traditional video tape。

zSupport various type of camera with real, live mode display。

zMulti-speed recording selection on normal recording mode or alarm recording mode, the highest

speed of recording is 30/25 (NTSC/PAL) fields on both mode。

zContrast, hue and brightness are adjustable for each camera individually。

zSupport up to 2 hard disks (HDD) from 40GB to 250GB compatible。

zWhen external alarm is triggered , correspond cameras number will show up on the monitor with

texts。

zSelectable recording qualities (best/high/medium/low)。

zRecording can operate manually or gets activated automatically when alarm is triggered。

zMotion detection function available, user can easily adjust sensitive of motion detection。

zPlayback record can be searched by time or by event list。

zPlay back mode could not be easier then ever for you to review the video that gets recorded on

reverse (x6) and fast forwarding (×2, ×4, ×6)。

zPlay back mode with pause (field by field) for forward。

zEasy operation, setting can be easily modified OSD (on screen display) menu。

zDevice will overwrites data and notice operator on monitor when the HDD is going full。

zHDD capacity status can be display on the screen for better storage management。

zSystem will restore the previous setting and continue camera activity after restart。

zKey lock function available to secure your DVR from button pressing accidentally。

zProvide 2 Monitor output。

zOptional network function

zSupport compact flash (CF) card for random backup and VCR for fully backup。

zAlarm notification could be sent via email when motion or external alarms are triggered.

CHAPTER 2

Hardware Overview

Front Panel Layout Overview

567891011 12 13 14 15 16 17

19 18 20

22 23

Buttons Function List

Part Label Function

1 POWER Power status LED.

2 REC Recording status LED.

3 PLAY Playback status LED.

4 H.D.D H.D.D LED

1. This View button controls FULL SCREEN display from camera 1.

2. A password can be setup by the view control button for number 1.

1. This View button controls FULL SCREEN display from camera 2.

2. A password can be setup by the view control button for number 2.

1. This View button controls FULL SCREEN display from camera 3.

2. A password can be setup by the view control button for number 3.

1. This View button controls FULL SCREEN display from camera 4.

2. A password can be setup by the view control button for number 4.

Quad Quad screen: All cameras are displayed.

REC

Press REC to start recording.

Rew Search 6 times speed fast rewind mode.

STOP

Press Stop to stop playback or recording.

Pause

Press Pause to pause (field by field) for forward.

You can easily lock your DVR by press 5 times Pause button under

recording or monitoring mode. When key lock is activated, you can see a

“L” show up on your upper right corner of screen. Press 5 times again to

release your button from key lock mode.

F.Fwd Search

Press F. Fwd to play video forward at high speed. Press the button again

the speed will be change circulative from ×2,×4, , to the highest ×6.

PLAY

Press the Play button to into time search and play video forward.

16 MENU Press MENU to go into or exit menu.

17 ▲

1. Move the cursor upward or decrease the number.

2. When it’s not under recording mode, you can use the button to adjust

position of date & time display which appears on OSD.

18 ▼

1. Move the cursor downward or increase the number.

2. When it’s not under recording mode, you can use the button to adjust

position of date & time display which appears on OSD

19 ◄( ENTER)

20 ►( ENTER)

1. Press ENTER button to make choose or make confirm in MENU

system.

2. You can use ENTER key to indicates H.D.D status when system is not

under Menu mode.

3. Make any changes in the selected option or decrease/increase the

number.

21 COPY CF Card Backup button.

22 CF Card Slot for compact flash (CF) card.

23 HDD FRAME Location of installation for removable HDD.

Back Panel Layout Overview

24 26 27

28 30 31

Back Panel Components Function List

Part Label Function

24 ETHERNET Ethernet network interface.

25 LED Network power indicator and network activate indicator.

26 COM PORT COM port for RS-485 interfaces which upon to request.

27 CAMERA OUT Camera 1-4 video output with BNC connector.

28 CAMERA IN Camera 1-4 video input with BNC connector.

29 MONITOR OUT Composite video output with 2 BNC connectors.

30 ALARM IN / Relay 8-Pin Alarm input and Relay output connector.

31 POWER / POWER SW AC90V~AC260V input.

Power ON/OFF switcher.

CHAPTER 3

SETUP PROCEDURES

1. MAIN MENU SETUP

SETUP MENU

>SYSTEM SETUP

CAMERA SETUP

RECORD SETUP

SCHEDULE RECORD

EVENT LIST

HDD MANAGEMENT

LOAD DEFAULT

EXIT

Press the MENU button to go into the main menu.

Use the ▲or ▼button to select items.

Press the ◄or ►button to confirm the selection.

Press MENU to escape to exit the set up mode.

Contents:

cSYSTEM SETUP

System set up

dCAMERA SETUP

Camera set up

3RECORD SETUP

Recording set up

4SCHEDULE RECORD

Schedule Recording set up

gEVENT LIST

Event indexing

hHDD MANAGEMENT

Hard disk management

iLOAD DEFAULT

Return to factory setting

jEXIT

Escape from the setup menu

2. SYSTEM SETUP

SYSTEM SETUP

> BUZZERDURATION 3SEC

VIDEOLOSSALARM ON

HDD PASSWORD

SET TIME/DATE

EXIT

Press the MENU button to go into the main menu.

Use the ▲or ▼button to select items.

Press the ◄or ►button to confirm the selection.

Press MENU to escape to exit the set up mode.

Contents:

cBUZZER DURATION 3SEC (1-30)

Use ◄or ►button to adjust the duration time of the buzzer action.

dVIDEO LOSS ALARM

On for default

eHDD PASSWARD

A password can be setup to protect the hard disk content. It needs to be entered in order

to perform a hard disk format. Initial number is 1111.

Use the view control button on the front panel to input the number.

is “1” , is “2” , is “3” , is “4”

fSET TIME/DATE

Use the ◄or ►button to select items.

Press the ▲or ▼button to increase / decrease the number.

gEXIT

Exit from the SYSTEM SETUP menu

3. CAMERA SETUP

CAMERA SETUP

>CAMERA SELECT CH1

CAMERA RECORD ON

MOTION DETECTION ON

MOTION SENSITIVITY 5

BRIGHTNESS STANDARD

CONTRAST STANDARD

HUE STANDARD

EXIT

Press the MENU button to go into the main menu.

Use the ▲or ▼button to select items.

Press the ◄or ►button to confirm the selection.

Press MENU to escape to exit the set up mode.

Contents:

cCAMERA SELECT CH1(CH1~CH4)

Use ◄or ►button to select the camera from CAM 1 – CAM 4 to be adjusted.

2CAMERA RECORD ON(ON/OFF)

Use ◄or ►button to select ON/OFF recording.

3MOTION DETECTION ON(ON/OFF)

Use ◄or ►button to select ON/OFF motion detection.

4MOTION SENSITIVITY(1~10)

Use ◄or ►button to adjust sensitivity of motion detection for selected camera. Initial

number from 1 to 10, default value is 5(STANDARD).

5BRIGHTNESS STANDARD(1~10)

Use ◄or ►button to adjust the brightness of the selected camera. Initial number is 5

(STANDARD).

6CONTRAST STANDARD(1~10)

Use ◄or ►button to adjust the contrast of the selected camera. Initial number is 5

(STANDARD).

7HUE STANDARD(1~10)

Use ◄or ►button to adjust the hue of the selected camera. Initial number is 5

(STANDARD).

8EXIT

Exit from the CAMERA SETUP menu

4. RECORD SETUP

RECORD SETUP

>RECORDMODE MUX

NORMAL RECORD FPS 15P

ALARM RECORD FPS 15P

ALARM RECORD DWELL 5SEC

RECORDQUALITY HIGH

MOTION ENENT MIGRATION OFF

EXIT

Press the MENU button to go into the main

menu.

Use the ▲or ▼button to select items.

Press the ◄or ►button to confirm the

selection.

Press MENU to escape to exit the set up mode.

Contents:

cRECORDMODE MUX(MUX/QUAD)

Use ◄or ►button to select MUX or QUAD recording.

dNORMAL RECORD FPS 15P (1~5P/7P/10P/15P/30P)

Use ◄or ►button to select recording speed.

15P means 15 fields per second, 30P is the highest speed, and 1P is the lowest. There are

a total of nine speeds you can choose from. (FPS: Field per second)

Note: PAL: (1~4P/6P/8P/12P/25P) NTSC=15P, PAL=12P on default.

eALARM RECORD FPS 15P (1~5P/7P/10P/15P/30P)

Use ◄or ►button to select alarm recording speed when external alarm or motion

Inhaltsverzeichnis

Andere Samsung DVR Handbücher

Samsung

Samsung 8340 Bedienungsanleitung

Samsung

Samsung SRD-470D Bedienungsanleitung

Samsung

Samsung SRD-1630D Bedienungsanleitung

Samsung

Samsung SRD-442 Bedienungsanleitung

Samsung

Samsung SHR-2040P Bedienungsanleitung

Samsung

Samsung SVR-1670 Bedienungsanleitung

Samsung

Samsung SVR-3200 Bedienungsanleitung

Samsung

Samsung SHR-6040 Bedienungsanleitung

Samsung

Samsung DSB-9601C Bedienungsanleitung

Samsung

Samsung SDE-500X Bedienungsanleitung

Samsung

Samsung SRD-830D Bedienungsanleitung

Samsung

Samsung SHR5160500 - Electronics Gvi - Dvr 16ch Mpeg4 120ips Real... Bedienungsanleitung

Samsung

Samsung SUJ-800 Bedienungsanleitung

Samsung

Samsung SHR-1010 Bedienungsanleitung

Samsung

Samsung SVR-1680 Bedienungsanleitung

Samsung

Samsung HRD-1642 Installationsanleitung

Samsung

Samsung SVR-1630 Bedienungsanleitung

Samsung

Samsung SRD-442 Bedienungsanleitung

Samsung

Samsung SDE-4001 Bedienungsanleitung

Samsung

Samsung SVR-940 Bedienungsanleitung

Samsung

Samsung SHR-5040 Bedienungsanleitung

Samsung

Samsung SRD-443 Bedienungsanleitung

Samsung

Samsung SMT-190Dx Bedienungsanleitung

Samsung

Samsung SRD-870D Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung

DIGIFUSION

DIGIFUSION FVRT150 Bedienungsanleitung