Samsung POWERbot VR R72 Series Bedienungsanleitung

POWERbot

Quick reference guide

VR**R72**** Series

• Before operating this unit, please read the instructions carefully.

• For indoor use only.

VR7200_Q_guide_13ge_00780D-02_GE.indb 1 2020-01-14 오후 3:04:03

English-2

Parts list

Main

body

Basic

Parts

Remote

controller

Docking

Station

Batteries

(AAA type)

Quick reference

guide

Spare lter Power cord

Battery Charger Boundary markers Soft Action Brush /

Brush cover

Combo Brush /

Brush cover

 Accessories may differ depending on the models.

 Refer to page 9 for the installation of boundary markers.

 Battery Spec :

VR20R72**** Series: Lithium-ion, 21.6V, 3600mAh, 12cell

VR10R72**** Series: Lithium-ion, 21.6V, 1800mAh, 6cell

 For VR20R726*** models, combo brush and soft action brush are provided.

[A type] [B type]

VR7200_Q_guide_13ge_00780D-02_GE.indb 2 2020-01-14 오후 3:04:06

English-3

Safety information

2-1

• Before operating the appliance, please

read this manual thoroughly and retain it

for your reference.

• Because these following operating

instructions cover various models, the

characteristics of your vacuum cleaner

may differ slightly from those described

in this manual.

Caution/Warning symbols used

WARNING

Indicates that a danger of death or serious

injury exists.

CAUTION

Indicates that a risk of personal injury or

material damage exists.

Other symbols used

NOTE

Indicates that the following text contains

additional important information.

• For information on Samsung’s

environmental commitments

and product specic regulatory

obligations e.g. REACH (WEEE,

Batteries) visit: samsung.com/uk/

aboutsamsung/samsungelectronics/

corporatecitizenship/data_corner.html

Important safety instructions

When using an electrical appliance, basic

precautions should be observed, including

the following:

Read all instrucrions before using your

robot vacuum cleaner.

Unplug the charger / docking station

from outlet when not in use and before

conducting maintenance.

WARNING

To reduce the risk of re, electric shock,

or injury:

General

• Use only as described in this manual.

• Do not operate POWERbot or the

charger/docking station if it has been

damaged in any way.

• If the vacuum cleaner is not working as

it should, has been dropped, damaged,

left outdoors, or dropped in water, return

it to a customer care center.

• Do not handle the charger / docking

station or POWERbot with wet hands.

• Use only on dry, indoor surfaces.

• This appliance can be used by children

aged from 8 years and above and

persons with reduced physical, sensory

or mental capabilities or lack of

experience and knowledge if they have

been given supervision or instruction

concerning use of the appliance in a

safe way and understand the hazards

involved. Children shall not play with

the appliance. Cleaning and user

maintenance shall not be made by

children without supervision.

• If the supply cord is damaged, it must

be replaced by the manufacturer or its

service agent or a similarly qualied

person in order to avoid a hazard.

VR7200_Q_guide_13ge_00780D-02_GE.indb 3 2020-01-14 오후 3:04:07

English-4

Safety information

2-2

Charger / Docking station

• Do not modify the polarized plug to t a

non-polarized outlet or extension cord.

• Do not use outdoors or on wet surfaces.

• Unplug the charger / docking station

from the outlet when not in use and

before servicing.

• Use only the charger / docking station

supplied by the manufacturer to

recharge.

• Do not use with a damaged cord or plug

or a loose power outlet.

• Do not pull or carry by the cord, use the

cord as a handle, close the door on the

cord, or pull the cord around sharp edges

or corners. Keep the cord away from

heated surfaces.

• Do not use extension cords or outlets

with inadequate current carrying

capacity.

• Do not unplug by pulling on the cord. To

unplug, grasp the plug, not the cord.

• Do not mutilate or incinerate batteries as

they will explode at high temperatures.

• Do not attempt to open the charger /

docking station. Repairs should only be

carried out by a qualied customer care

center.

• Do not expose the charger / docking

station to high temperatures or allow

moisture or humidity of any kind to

come into contact with the charger /

docking station.

• Do not charge the non-rechargeable

batteries with the charger / docking

station.

• COMMISSION REGULATION (EU)

2019/1782

Ecodesign requirements for external

power supplies : www.samsung.com/

global/ecodesign_component

POWERbot

• Do not pick up hard or sharp objects

such as glass, nails, screws, coins, and

etc.

• Do not use without a lter in place.

When servicing the unit, never put

ngers or other objects into the fan

chamber in case the unit accidentally

turns on.

• Do not put any objects into openings.

Do not use with any openings blocked;

keep openings free of dust, lint, hair, and

anything that may reduce air ow.

• Do not pick up toxic materials (chlorine

bleach, ammonia, drain cleaner, etc.).

• Do not pick up anything that is burning

or smoking, such as cigarettes, matches,

or hot ashes.

• Do not use to pick up ammable or

combustible liquids such as gasoline or

use in areas where they may be present.

Also do not use in:

– Locations with candles or desk lamps

on the oor.

– Locations with unattended res (re or

embers).

– Locations with distilled alcohol,

thinner, ashtrays with burning

cigarettes, etc.

• Do not use POWERbot in an enclosed

space lled with vapours given off by oil

based paint, paint thinner, moth proong

substances, ammable dust, or other

explosive or toxic vapours.

• Leaks from battery cells can occur

under extreme usage or temperature

conditions. If the liquid gets on

skin, wash quickly with water. If the

liquid gets into the eyes, ush them

immediately with clean water for a

minimum of 10 minutes. Seek medical

attention.

VR7200_Q_guide_13ge_00780D-02_GE.indb 4 2020-01-14 오후 3:04:07

English-5

Safety information

2-3

WARNING

Power related

• Please prevent any risk of electric shock

or re.

– Do not damage the power cord.

– Do not pull the power cord too hard or

touch the power plug with wet hands.

– Do not use a power source other than

100-240V~ and also do not use a

multi outlet to supply power to number

of devices at the same time. (Do not

leave the cord carelessly on the oor.)

– Do not use a damaged power plug,

power cord or loose power outlet.

• Clean dust or any foreign matters on the

pin and contact part of the power plug.

– There is a risk of electric shock or

malfunction.

Before use

• Do not use POWERbot near a heater or

combustible materials.

– Do not use powerbot near re or

ame such as a movable heater, a

candlelight, a desk lamp, a replace

etc. or in a place where combustible

materials such as gasoline, alcohol,

thinner etc. exist.

• Make sure there are no dangerous

objects around the POWERbot’s cleaning

area to prevent collision and unplug any

electric heaters or fans.

• The POWERbot is intended for household

use therefore do not use it in an attic,

basement, storage, industrial building,

out of indoor space, places with moisture

(such as bathroom, laundry), on the table

or shelves.

– The POWERbot can be damaged or

malfunction.

• Be sure POWERbot does not pass

through or touch any kind of liquids.

– The POWERbot can be severely

damaged and it may contaminate other

areas if the wheels pass through liquid.

• Attach the boundary markers to places

where the POWERbot may fall such as

the top of a staircase or a bannister to

prevent product damage and injury.

– Please keep the cliff sensor clean at all

times for safety.

• Do not spill any liquids on the docking

station.

– There is a risk of re or electric shock.

• Do not use the charger / docking station

for anything other than its intended

purpose.

– There is a risk of re or severe damage

to the docking station.

• Always keep the cliff sensor clean for

your safety.

In use

• If any abnormal sounds, smells or smoke

come from POWERbot, immediately shut

off the emergency switch at the bottom

of POWERbot and contact a service

center.

Cleaning and maintenance

• When power cord is damaged, contact

a service center to get it replaced by

certied repairman.

– There is a risk of re or electric shock.

• Please check with a Samsung Electronics

service center when exchanging

batteries.

– Using batteries from other products

can cause malfunction.

CAUTION

Before use

• Insert the dustbin before using POWERbot.

• Be careful with the followings for proper

automatic recharging.

– Always turn on the power of the

docking station.

– Install the docking station where the

POWERbot can nd it easily.

– Do not leave any object in front of the

docking station.

VR7200_Q_guide_13ge_00780D-02_GE.indb 5 2020-01-14 오후 3:04:07

English-6

Safety information

2-4

• When installing the docking station, do

not leave the cord carelessly on the oor

since POWERbot may get tangled by it.

• Do not use POWERbot on black colored

oors.

– The POWERbot may not be able to

operate normally.

• Do not pick up POWERbot by the dustbin

holder.

• Do not place any objects within 0.5 m

to both sides and 1 m to the front of the

docking station.

• Make sure the docking station’s charging

contact is not damaged or have any

foreign matters on it.

• Do not install the docking station in an

area with a dark oor.

– If the oor around the docking station

is dark, recharging is hindered.

• Move any obstacles that may disturb

POWERbot’s movement (such as children’s

indoor swing or slides) before cleaning.

• Do not use the POWERbot in a place

which is narrower than the turning

radius (0.5 m or less) of the POWERbot.

• To clean all areas of your house, open all

rooms and attach the boundary markers

on the places where the POWERbot

may get damaged such as a front door,

veranda, bathroom, and stairs for safety.

• For the very low areas where the

POWERbot may get stuck, attach the

boundary markers to prevent the

POWERbot from getting in.

• If a brush or brush cover is not assembled

correctly, scratches may occur on the

oor, or product malfunction may occur.

• Before operating the POWERbot, remove

the objects which could break such as

a frame, mirror, and porcelain items

so that the POWERbot works without

interruption.

In use

• Using POWERbot on thick carpet may

damage both POWERbot and the carpet.

– The POWERbot cannot pass over carpet

that is thicker than 1 cm.

• Do not use POWERbot on tables or other

high surfaces.

– There is a risk of damage if it falls.

• The POWERbot may bump into chair,

desk legs therefore move them away for

faster and efcient cleaning.

• When POWERbot is operating, do not lift

it up or carry it to another area.

• Do not hold by driving wheels of

POWERbot when carrying it to another

area.

• Do not put any objects on top

of POWERbot since it may cause

malfunction.

• Remove any large papers or plastic bags

immediately when using POWERbot

since they may block the intake.

• Do not aim the red pointer directly at

people or animals.

• Do not lie down around the POWERBOT

that is running.

– Your hair may be caught in the brush,

resulting in physical injury.

Cleaning and maintenance

• Prevent any damage to POWERbot by

complying the followings.

– Do not clean POWERbot by spraying

water directly onto it or use benzene,

thinner, acetone or alcohol to clean it.

• Do not disassemble or repair POWERbot.

This should only be done by a certied

repairman.

• Always keep the obstacle sensor and cliff

sensor clean.

– If foreign matter accumulates, sensors

may malfunction.

VR7200_Q_guide_13ge_00780D-02_GE.indb 6 2020-01-14 오후 3:04:08

English-7

Charging

Charge the POWERbot fully before using for the first time.

Please install the docking station in a place

where the oor is level and wall is straight.

How to turn on the

emergency switch

Hold the robot vacuum cleaner and

turn on the emergency switch without

pressing any buttons.

"" will turn on according to

charging progress and "FULL" will

turn on when charging is complete.

When the product is purchased, the battery is not charged, so charging must initially be done manually.

0.5 m

1 m

0.5 m

Make sure the

charge pins on the

robot vacuum cleaner

and the charger are

aligned.

Ensure the power

cord is arranged

neatly next to the

wall.

ÚInstall with the grain of wood oors.

Install the charger

where the robot vacuum

cleaner can easily nd

it.

VR7200_Q_guide_13ge_00780D-02_GE.indb 7 2020-01-14 오후 3:04:10

English-8

4-1

Using the robot vacuum cleaner

Starting Auto clean mode

The POWERbot moves and

automatically cleans the set

areas only once.

Stop cleaning:

Press and release the button

Starting Spot clean mode

Press and release this button.

The POWERbot cleans a

localized area intensely.

Recharging

You can command POWERbot

to recharge at the docking

station automatically while it is

cleaning by pressing this button.

Auto Clean Spot Clean Repeat clean Manual Clean

Manual clean mode

can be selected by the

direction control buttons

of the remote controller.

Press the [ ] on the

remote controller rst

and then press the [Start/

Stop ].

 VR20R72**** Series: POWERbot increases suction power in Spot clean and Point cleaning mode.

VR7200_Q_guide_13ge_00780D-02_GE.indb 8 2020-01-14 오후 3:04:12

English-9

Using the robot vacuum cleaner

4-2

About the boundary markers

To prevent the POWERbot from entering the following areas, attach

the boundary markers on the oor in the shape at an interval of

about 15cm.

About 15cm

Boundary

markers

About 5cm

About 15cm

Boundary

markers

where a raised spot is below 5cm where there is a slide, swing, replace or any

ammable substance or moisture.

Above 1.5cm

boundary

markers

Boundary

markers

where a threshold is above 1.5cm where there is risk of falling such as stairs, porches

or guardrails.

VR7200_Q_guide_13ge_00780D-02_GE.indb 9 2020-01-14 오후 3:04:13

English-10

1. Power

Turn POWERbot's power on/off

2. Recharging

Select to recharge POWERbot at the docking station

automatically

3. Start/Stop

Select to start or stop cleaning process

4. Auto clean

Select to clean all set areas only once and then

automatically return to the docking station

5. Spot clean

Select to clean a localized area intensely

6. Repeat clean

Select to clean repeatedly until the battery becomes

very low with indicator blinking

7. Turbo mode

Select to clean with the strongest suction power

8. Normal mode

Select to clean with moderate suction power

9. Quiet mode

Select to clean with lower operation noise

10. Sound

Select to set the voice guide

• Voice Guide (English) Sound Effects Mute

• Press and hold the sound button to change and set

a language.

11. Schedule / Cancel(3sec)

Refer to page 11

12. Clock

Refer to page 11

13. Remote control

Select to turn Wi-Fi function on or off

Using the robot vacuum cleaner

4-3

[B type][A type]

3 4

VR7200_Q_guide_13ge_00780D-02_GE.indb 10 2020-01-14 오후 3:04:14

Inhaltsverzeichnis

Sprachen:

Andere Samsung Staubsauger Handbücher

Samsung

Samsung Vacuum cleaner Bedienungsanleitung

Samsung

Samsung SC6560 Bedienungsanleitung

Samsung

Samsung SC06H70 H Series Bedienungsanleitung

Samsung

Samsung VS15T70 Series Bedienungsanleitung

Samsung

Samsung SC44** Series Bedienungsanleitung

Samsung

Samsung DJ68-00368Q Bedienungsanleitung

Samsung

Samsung SC44** Series Bedienungsanleitung

Samsung

Samsung SR1AM70 Series Bedienungsanleitung

Samsung

Samsung SC9150 Bedienungsanleitung

Samsung

Samsung VC-8828E Bedienungsanleitung

Samsung

Samsung Jet Bot VR30T85 Series Bedienungsanleitung

Samsung

Samsung VS25C97 Series Bedienungsanleitung

Samsung

Samsung SR8950 Bedienungsanleitung

Samsung

Samsung POWERbot VR AM70 Series Bedienungsanleitung

Samsung

Samsung VS60K6030KY Bedienungsanleitung

Samsung

Samsung VC-5814 Bedienungsanleitung

Samsung

Samsung POWERbot SR2 M70 Series Bedienungsanleitung

Samsung

Samsung SC05M31 Series Bedienungsanleitung

Samsung

Samsung VC-8726VT Bedienungsanleitung

Samsung

Samsung VS15A6032R5/EE Bedienungsanleitung

Samsung

Samsung SC4520 Bedienungsanleitung

Samsung

Samsung sc7400 Bedienungsanleitung

Samsung

Samsung SU3364 Bedienungsanleitung

Samsung

Samsung SC8461 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch