Samsung VC-5814H Bedienungsanleitung

VACUUM CLEANER

❈Before operating this unit, please read the instructions carefully.

Operating Instructions

DJ68-00092C 8/31/04 4:57 PM Page 1

FEATURES

Features include automatic cord rewind and dust indicator.

IMPORTANT SAFEGUARDS

1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity

supply is the same as that indicated on the rating plate on the bottom of the cleaner.

2. WARNING : Do not use the vacuum cleaner when rug or floor is wet.

3. Close supervision is necessary when any appliance is used by or near children. Do not allow the

vacuum cleaner to be used as a toy. Do not allow the vacuum cleaner to run unattended at any time.

Use the vacuum cleaner only for its intended use as described in these instructions.

4. Do not use the vacuum cleaner without a dust bag. Change the dust bag before it is full in order to

maintain best efficiency.

5. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep the vacuum

cleaner away from stoves and other heat sources. Heat can deform and discolour the plastic parts of

the unit.

6. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the cleaner

parts. Do not stand on the hose assembly. Do not put a weight on the hose. Do not block the suc-

tion or the exhaustion part.

7. Switch the vacuum cleaner off at the machine before unplugging from the electrical outlet. Grasp

the plug to disconnect from power outlet to avoid damage to cord, plug, prongs or socket. Do not pull

the power cord. Always disconnect cord from electrical outlet before changing the dust bag.

8. The use of an extension cord is not recommended.

9. If your vacuum cleaner is not operating correctly, switch off the power supply and consult an

authorized service agent.

10. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a

similarly qualified person in order to avoid a hazard.

NOTE : Not all models have the same features.

DJ68-00092C 8/31/04 4:57 PM Page 2

IDENTIFICATIONS OF PARTS

Features marked *may vary according to model.

▲

TUBE*

REMOTE POWER CONTROL

(REMOTE CONTROL MODEL ONLY)

FLOOR NOZZLE*

RUG/FLOOR SELECTOR CLAMPER FOR DUST

BAG COMPARTMENT

DUST-FULL

INDICATOR

SUCTION HOSE

BUTTON FOR

SUCTION HOSE

REMOVAL

CARRYING HANDLE

BELT-STRAP ASSY*CREVICE-TOOL

HANGER ACCESSORY DUSTING BRUSH

CORD REWIND

BUTTON

DJ68-00092C 8/31/04 4:57 PM Page 3

NOTE :When removing the power cord from the electrical outlet, grasp the plug, not the cord.

NOTE :For your convenience, the handle has two functions. It can be used as a “handle” to carry

the unit. It is also the cord rewind button that can be used to rewind the power cord.

POWER CORD

1) PULLING OUT

The power cord is long enough to be drawn out for

convenience.

2) REWINDING

When you have finished cleaning, disconnect the plug

from the electrical outlet and simply press the cord

rewind button lightly with your toe.

ASSEMBLING THE VACUUM-CLEANER READY FOR USE

1) Connect the suction hose to the suction tube. 2) Connect the suction tubes together (depend-

ing on model).

4) Grip the body connector with one hand and

squeeze the tube in an inward direction.

3) Connect the nozzle to the suction tube. OPTION :

①EXTENDING :Holding the narrow part of

the telescopic tube with one hand, pull the

handle in the opposite direction with your

other hand.

➁ SHORTENING :Holding the narrow part of

the telescopic tube with one hand, push the

handle towards it using the other hand.

- Adjustable telescopic tube not available

with all models.

DJ68-00092C 8/31/04 4:57 PM Page 4

NOTE :If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn

the cleaner off and check whether the hose, tube or nozzle is clogged.

SUCTION POWER CONTROL (REMOTE CONTROL MODEL ONLY)

Your cleaner has variable electronic suction control to give you greater versatility.

Select the most suitable position according to cleaning needs.

The suction capacity can be regulated steplessly by moving the slide to the desired positon

DUST-FULL INDICATOR

If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires replacement.

USING THE ACCESSORIES

SLDE THE PART “A” IN THE STOP POSITION

Vacuum cleaner switches off (stand by mode)

SLIDE THE PART “A” FOWARDS MAX

Suction capacity increases steplessly up to MAX.

CREVICE DUSTING

Crevice tool for radiators, crevices,

corners, between cushions.

Dusting brush for furniture,

shelves, books, etc. •

Before use, assemble the dust-

ing brush to the crevice tool

Your cleaner features a tool storage device.

Assemble the accessory hanger on to the extension tube.

It can be used to store the cleaning tools while they are

not in use.

This tool can be separated into two parts.

TOOL STORAGE

DJ68-00092C 8/31/04 4:57 PM Page 5

PARK POSITION

TRANSPORTING AND STORING THE VACUUM CLEANER

Located on the top rear side of the vacuum-cleaner, there is

a nozzle support that can be used to park the nozzle during

pauses in cleaning.

For easy storage and transportation, this vacuum cleaner

has a clip system built onto the body, which will keep the

tube, hose and nozzle in a vertical position.

Ready for use

▼

1) Insert the lockers into the holes on the cleaner, taking

care of the lockers’ direction.

Strap-ends should face the body of the cleaner.

2) Pull the lockers to the front of the cleaner until they click

into place.

3) Adjust the strap length to fit your body.

When not using the strap

▼

- Detach the lockers by pushing them down and drawing

them out from the unit.

- Keep the strap separately for the next time you want to

use it.

This appliance is designed to be conveniently carried on

your waist using the belt-strap accessory.

When cleaning steps, curtains, shelves, etc, you can

carry the unit with the strap over your shoulder.

2) 3)

Locker

USING & ASSEMBLING THE STRAP

(OPTIONAL)

DJ68-00092C 8/31/04 4:57 PM Page 6

SECONDARY FILTER SECONDARY FILTER

To open the dust cover of the dust bag com-

partment, press the clamper upwards.(The clamper is located at the front of the dust cover)

2) Remove the dust bag from the cleaner.

FOR CLOTH FILTER BAG

MAINTENANCE OR REPLACEMENT OF THE FILTERS

After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.

OUTLET FILTER

▼

INLET FILTER

To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust

compartment. Do not allow the filter to become clogged. Suction power reduction or motor damage

may result. After cleaning the secondary filter attach it in place.

▼

NOTE: The filters must be completely dried before being replaced in the dust compartment.

1) Open the grille part, separate the

exhausted filter. 2) Reassemble it after cleaning or replacing

the filter in the reverse order.

REPLACING THE DUST BAG

3) After removing the used dust bag, insert the

cardboard bag collar of the new dust bag

into its original position.

4) Press the dust cover down gently until the

clamper relocks.

DJ68-00092C 8/31/04 4:57 PM Page 7

TROUBLE SHOOTING

This Vacuum cleaner is approved the following

EMC Directive : 89/336/EEC, 92/31EEC and 93/68/EEC

Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC

Select the carpet indicator ➀when cleaning carpets.

Select flat surface indicator ➁when cleaning the floors, tiles, etc.

FOR UNIVERSAL BRUSH

Use the floor nozzle for cleaning all surfaces.

DJ68-00092C REV(0.0)

NOTE: For optimum efficiency, clean floor brush with crevice tool.

FOR RUG / FLOOR SELECTOR

Before use make sure that the position of the selector is in the right position for the type of surface to be

cleaned.

USAGE OF FLOOR NOZZLE

PROBLEMA CAUSA RIMEDIO

Motor does not start. No power supply. Check cable, plug and

socket.

Suction force is gradually

decreasing. Filter, nozzle, suction hose

or tube is blocked. Remove the object.

Cord does not rewind fully. Check that the cord is not

twisted or wound unevenly. Pull the cord out 2~3m &

push down the cord rewind

button.

DJ68-00092C 8/31/04 4:57 PM Page 8

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Staubsauger Handbücher

Samsung

Samsung SC07H40 Bedienungsanleitung

Samsung

Samsung SC54 Series Bedienungsanleitung

Samsung

Samsung SR8845 Bedienungsanleitung

Samsung

Samsung SR8845 Bedienungsanleitung

Samsung

Samsung VS15T70 Series Bedienungsanleitung

Samsung

Samsung SU6760 Bedienungsanleitung

Samsung

Samsung Vacuum cleaner Bedienungsanleitung

Samsung

Samsung SC13M3110 series Bedienungsanleitung

Samsung

Samsung Vacuum cleaner Bedienungsanleitung

Samsung

Samsung SC15F60 Series Bedienungsanleitung

Samsung

Samsung Vacuum cleaner Bedienungsanleitung

Samsung

Samsung VAC-9048B Bedienungsanleitung

Samsung

Samsung VC-6814VN Bedienungsanleitung

Samsung

Samsung POWERbot SR20J92 Series Bedienungsanleitung

Samsung

Samsung SC7030 Bedienungsanleitung

Samsung

Samsung SC6200 SERIES Bedienungsanleitung

Samsung

Samsung SR8845 Bedienungsanleitung

Samsung

Samsung VAC9013BP Bedienungsanleitung

Samsung

Samsung SR20H9050U Bedienungsanleitung

Samsung

Samsung SR8825 Referenzhandbuch

Samsung

Samsung VAC9073BP Merkblatt

Samsung

Samsung VC-77 Series Bedienungsanleitung

Samsung

Samsung SC5120 Bedienungsanleitung

Samsung

Samsung POWERBOT Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch