Samsung VCC96P0H1G Bedienungsanleitung

imagine the possibilities

Thank you for purchasing a Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

Vacuum Cleaner

user manual

✻Before operating this unit, please read the instructions carefully.

✻For indoor use only.

English

SC96P* series

This manual is made with 100% recycled paper.

DJ68-00621J(RAMBO-P)-0.0.indb 1 2012.4.16 10:30:23 AM

2_ safety information

safety information

SAFETY INFORMATION

• Before operating the appliance, please read this manual thoroughly and retain

it for your reference.

• Because the following operating instructions cover various models, the

characteristics of your vacuum cleaner may differ slightly from those

described in this manual.

CAUTION/WARNING SYMBOLS USED

WARNING Indicates that arisk of death or serious injury exists.

CAUTION Indicates that a risk of personal injury or material damage exists.

OTHER SYMBOLS USED

Represents something you must NOT do.

Represents something you must follow.

Indicates that you must disconnect the power plug from the socket.

This vacuum cleaner is designed for domestic household use only. Do not use this

vacuum cleaner to clear building waste or debris. Do not use this vacuum cleaner with

any of the ﬁlters removed as this could cause damage to the internal components and

void your warranty.

SAVE THESE INSTRUCTIONS

POLARIZED PLUG INSTRUCTIONS

- To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than

the other). This plug will ﬁt in a polarized outlet only one way. If the plug does not ﬁt fully in the

outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician to install the proper

outlet. Do not change the plug in any way.

WARNING

DJ68-00621J(RAMBO-P)-0.0.indb 2 2012.4.16 10:30:23 AM

safety information _3

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, you should always follow these basic precautions:

READ ALL INSTRUCTIONS BEFORE USING YOUR CANISTER VACCUM

WARNING– To reduce the risk of ﬁre, electric shock, or injury:

1. Do not leave the appliance unattended when it is plugged in. Unplug from the outlet

when not in use and before servicing.

2. Do not use outdoors or on wet surfaces.

3. Do not allow the vacuum to be used as a toy. Pay close attention when the vacuum is

used by or near children.

4. Use only as described in this manual. Use only manufacturer’s recommended

attachments.

5. Do not use with a damaged cord or plug. If the appliance is not working as it should,

has been dropped, damaged, left outdoors, or dropped into water, bring it to a service

center.

6. Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or

pull the cord around sharp edges or corners. Do not run appliance over the cord.

Keep the cord away from heated surfaces.

7. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

8. Do not handle the plug or appliance with wet hands.

9. Do not put any object into openings. Do not use with any opening blocked.

Keep free of dust, lint, hair, and anything that may reduce air ﬂow.

10. Keep hair, loose clothing, ﬁngers, and all parts of your body away from openings and

moving parts.

11. Turn off all controls before unplugging.

12. Use extra care when cleaning on stairs.

13. Do not use to pick up ﬂammable or combustible liquids, such as gasoline, or use in

areas where they may be present.

14. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or

hot ashes.

15. Do not use without the dirt cup and/or ﬁlters in place.

16. Do not use the vacuum cleaner in an enclosed space ﬁlled with vapors given off by oil

base paint, paint thinner, some moth prooﬁng substances, ﬂammable dust, or other

explosive or toxic materials.

17. Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.

18. The hose contains electrical wires. Do not use when damaged, cut, or punctured.

19. Always turn off this appliance before connecting or disconnecting either the hose or

motorized nozzle.

20. Unplug before connecting the motorized nozzle.

21. Hold the plug when rewinding onto the cord reel. Do not allow the plug to whip when

rewinding.

safety information

DJ68-00621J(RAMBO-P)-0.0.indb 3 2012.4.16 10:30:23 AM

4_ contents

contents

ASSEMBLING THE VACUUM

05 Assembling the vacuum

OPERATING THE VACUUM

06 Power cord

06 On/Off switch

07 Power control

08 Power Brush

MAINTAINING THE TOOLS AND

FILTERS

09 Using accessories

10 Maintaining ﬂoor tools

11 Emptying the dust bin

12 Cleaning the dust pack

14 Cleaning the outlet ﬁlter

14 Changing the battery

TROUBLESHOOTING

DJ68-00621J(RAMBO-P)-0.0.indb 4 2012.4.16 10:30:23 AM

assembling the vacuum _5

01 ASSEMBLING THE VACUUM

assembling the vacuum

• Please do not push the button of

the dust bin handle when carrying

the machine. (See page 12.)

• When storing, park the oor nozzle.

OPTIONS

DJ68-00621J(RAMBO-P)-0.0.indb 5 2012.4.16 10:30:24 AM

6_ operating the vacuum

operating the vacuum

POWER CORD

ON/OFF SWITCH

• When removing the plug from the electrical outlet, grasp the

plug, not the cord.

CAUTION

DJ68-00621J(RAMBO-P)-0.0.indb 6 2012.4.16 10:30:25 AM

operating the vacuum _7

02 OPERATING THE VACUUM

- BODY

Press the power ON/OFF button repeatedly to start

and to stop the vacuum cleaner.

(OFF →ON →OFF)

If the remote handle control is not working, the

cleaner can be operated using the ON/OFF

button on the body of the machine.

1The ON/OFF button operates the vacuum cleanner or stops it.

2The ﬁlter light is illuminated when the dust pack requires checking or

emptying. An audio signal will also sound.

3This indicates that the automatic suction mode is selected. The level of

suction is indicated by the LED display.

POWER CONTROL

1. Vacuum cleaner ON/OFF( )

Press the ON/OFF button to operate the

vacuum cleaner. Press again to stop the

vacuum cleaner.

Vacuum cleaner suction(-/+) and Auto Mode

Press the SUCTION(-/+) AUTO button to change

the suction power of the vacuum. When you

start, each time you press the button, you

increase the suction power. After you press the

suction button three times, the vacuum reaches

its maximum suction power. Then, an additional

press will set the vacuum to Auto mode. In Auto

mode, the vacuum adjusts the suction power automatically. After the vacuum has reached

Auto mode, when you press the button, you return it to its minimum suction power.

In short, suction operates in this sequence: 1 - 2 - 3 - AUTO - 1 - 2 - 3 - AUTO, etc.

3. BRUSH ON/OFF

Press the BRUSH ON/OFF button to operate the Power Brush. Press again to stop the

Power Brush.

Don’t cover the handle transmitter when you use a handle control button.

FCC NOTICE

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may

cause undesired operation.

RADIO FREQUENCY REMOTE-CONTROL

- HOSE

Handle Control

The cleaner is controlled by radio

frequency signals.

transmitter

2 3

DJ68-00621J(RAMBO-P)-0.0.indb 7 2012.4.16 10:30:27 AM

8_ operating the vacuum

VACUUMING WITH THE POWER BRUSH

OVERLOAD PROTECTOR

1. Attaching the Power Brush

The hose must be plugged into the canister and the

power brush must be plugged into the hose and

extension wand.

2. Vacuuming

• For best results, move the power brush slowly using

short, overlapping strokes.

• For heavily soiled areas, repeat strokes in several

directions.

• Push the height adjustment button to match the surface being cleaned.

• Press the height adjustment button at the bottom of the wand until it clicks.

Do not invert the power brush while it is running.

3. Checking the Performance of the Power Brush

You can check whether the power brush is operating correctly by lifting up the

extension tube slightly to view the back of the brush.

The Power Brush will not operate when it is jammed or the unit is turned off.

If the Power Brush is jammed, unplug the power cord from the electrical outlet.

Turn the power brush over and remove the jammed object.

Turn the power brush back to the vacuuming position and resume vacuuming.

The overload protector shuts off the brush motor if

the ﬂoor brush becomes obstructed, the ﬂoor brush

will stop, but the suction motor will continue to run.

To reset the overload protector, turn the vacuum off

and unplug it. Clear the obstruction from the ﬂoor

brush area. Use a pen tip to press down the reset

switch. Turn the vacuum on and continue cleaning.

CAUTION

Reset S/W

POWER BRUSH

DJ68-00621J(RAMBO-P)-0.0.indb 8 2012.4.16 10:30:28 AM

maintaining the tools and ﬁlters _9

MAINTAINING THE TOOLS AND FILTERS

maintaining the tools and ﬁlters

USING ACCESSORIES

PIPE

•

Adjust the length of the telescopic pipe by sliding

the length control button located in the center of the

telescopic pipe back and forth.

•

To check for blockages, separate the telescopic pipe

and adjust to shorten. This allows for easier removal of

waste clogging the tube.

ACCESSORIES (OPTIONAL)

•

Push the accessory onto the end of

the hose handle.

•

Pull out the dusting brush to use the

crevice tool.

DJ68-00621J(RAMBO-P)-0.0.indb 9 2012.4.16 10:30:32 AM

10_ maintaining the tools and ﬁlters

REPLACING the Drive Belt

1. Make sure that the vacuum is unplugged.

2. With the rotating ﬂoor brush removed from the vacuum

cleaner, grasp the old drive belt and remove it from the

motor pulley. Discard the old drive belt.

3. Place the new drive belt over the motor pulley and stretch

the other end over the rotating ﬂoor brush in the space

between the bristles.

4. Place the ends of the rotating ﬂoor brush down into the

slots on the sides as shown.

5. Turn the rotating ﬂoor brush by hand several times in the

direction of the motor pulley. If properly installed, the drive belt will center itself on the

rotating brush crown.

6. Reposition the brush cover and screws. Tighten the screws securely.

CHECKING the Rotating Floor Brush and Drive Belt

You should check your vacuum cleaner’s rotating ﬂoor brush and drive belt regularly for

wear or damage. You should also clean strings, hair, and carpet ﬁbers off the brush and

brush ends. These can wrap around the brush and hamper its ability to effectively clean

your carpet. Also remove any debris that has accumulated under the brush cover.

1. Unplug the vacuum the electrical outlet.

2. Place the handle in low position and turn the vacuum

cleaner over so the bottom side is up.

3. Remove the six screws (at arrows, right) with a screwdriver.

4. Remove the brush cover from the ﬂoor brush.

5. Grasp the rotating ﬂoor brush at both ends and lift.

6. Clean string, hair and other debris off the rotating ﬂoor

brush, paying particular attention to brush ends.

7. Clean string, hair and other debris off the motor pulley and

drive belt areas.

8. Check the drive belt carefully for wear, cuts or stressed

areas.

9. Check the air passageway for obstructions. Remove

debris from this area.

The rotating ﬂoor brush could cause the fringe of a rug

to become tangled within the vacuum.

Use caution and turn off the ﬂoor brush when

vacuuming throw rugs with fringe.

Brush

Cover

CAUTION

MAINTAIN FLOOR TOOLS

DJ68-00621J(RAMBO-P)-0.0.indb 10 2012.4.16 10:30:40 AM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Samsung Staubsauger Handbücher

Samsung

Samsung SR8845 Bedienungsanleitung

Samsung

Samsung VAS-2498N Bedienungsanleitung

Samsung

Samsung SS60K60 Series Bedienungsanleitung

Samsung

Samsung Jet Bot VR50T95 Series Bedienungsanleitung

Samsung

Samsung SS6AK6050KW Series Bedienungsanleitung

Samsung

Samsung SC21K51 Series Bedienungsanleitung

Samsung

Samsung Smart Drum Vacuum Cleaner Bedienungsanleitung

Samsung

Samsung SR10F71UC Bedienungsanleitung

Samsung

Samsung SC07F30 Series Bedienungsanleitung

Samsung

Samsung SC478 Series Bedienungsanleitung

Samsung

Samsung Jet 60 Turbo VS15A60 Series Bedienungsanleitung

Samsung

Samsung VR30T85513W/WA Bedienungsanleitung

Samsung

Samsung SC07F50 series Bedienungsanleitung

Samsung

Samsung VC-7423V Bedienungsanleitung

Samsung

Samsung POWERbot SR1 M70 Series Bedienungsanleitung

Samsung

Samsung Vacuum cleaner Bedienungsanleitung

Samsung

Samsung VCDC12 Series Bedienungsanleitung

Samsung

Samsung SU-2910 Series Bedienungsanleitung

Samsung

Samsung DJ68 Bedienungsanleitung

Samsung

Samsung SC07H40 Bedienungsanleitung

Samsung

Samsung SU2911 Bedienungsanleitung

Samsung

Samsung SR8850 Bedienungsanleitung

Samsung

Samsung VC-7113 Bedienungsanleitung

Samsung

Samsung SC8790 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch