Sanus BXF230 Bedienungsanleitung

BXF

230

INSTRUCTION MANUAL

GET IT

RIGHT

THE FIRST TIME

Follow this step-by-step

instruction manual to

speed up your installation.

WE’RE HERE TO HELP

Get it right the ﬁrst time.

HeightFinder™ shows you

where to drill.

Check it out at:

SANUS.com/1172

Want to watch a video that

shows how easy this DIY

project will be?

Watch it now at:

SANUS.com/2814

Our US-based install experts

are standing by to help.

Call us at:

800-359-5520

Or, chat at:

SANUS.com/chatSP

Texto en español, página 13

TV Weight Limit

(including accessories)

DO NOT EXCEED

If your TV, plus accessories, weighs MORE

than indicated, this mount is NOT compatible.

Visit SANUS.com or call customer service to

ﬁnd a compatible mount.

Call Customer Service

Tools

Needed

Wall

Construction

ONLY install on

these acceptable

wall types.

Unsure

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS

Please read through these instructions completely to be sure you’re comfortable with this easy install process.

Check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,

contact Customer Service.

CAUTION: Avoid potential personal injuries and property damage!

●This product is designed ONLY to be installed into wood studs, solid concrete or concrete block.

—DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.

●This product is designed for INDOOR USE ONLY.

●The wall must be capable of supporting ﬁve times the weight of the TV and mount combined.

●Do not use this product for any purpose not explicitly speciﬁed by manufacturer.

●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

175 lbs.

(79.3 kg)

Drywall alone

will NOT hold

the weight of

your TV.

wood studs Solid concrete or

concrete block

ACCEPTABLE ACCEPTABLE

CAUTION:

DO NOT install

in drywall alone

Wood Stud

Install

Concrete

Install

Awl

Pencil Level Tape

Stud

Finder

ScrewdriverTape

Measure

7/32 in.

(5.5 mm)

Wood

Drill Bit

Electric

Drill

Hammer

1/2 in.

(13 mm)

Socket

Wrench

Drill Bit

3/8 in.

(10 mm)

Concrete

BEFOREYOU BEGIN

Remove the stand from

your TV —if attached. Install any accessories you may

have purchased, if they requireTV removal

prior to assembly. Note that the TV is

removable for future accessory purchases.

Soft clean surface

Protect the face of your TV

when laying it down for installation.

DIMENSIONS IN. [MM]

Legrand AV Inc. and its aliated corporations and subsidiaries (collectively, “Legrand ”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information

contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this

document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand assumes

no responsibility for accuracy, completeness or suciency of the information contained in this document.

15.75in

400mm

MAX

23.62in

600mm

MAX

7.87in

200mm

MIN

7.87in

200mm

MIN

36.53in

927.7mm

21.83in

554.6mm

23.26in

590.8mm

18.75in

476.2mm

15.76in

400.4mm

2.36in

60mm

16.00in

406.4mm

24.00in

609.6mm

0.36in

9.1mm

12.95in

329mm

22.03in

559.6mm

36.77in

934.1mm

55deg

30.31in

769.9mm

5deg UP

15deg DOWN

2.45in

62.3mm

SIMULATED 75"

FLAT SCREEN TV

TV INTERFACE

WALL PLATE

TOP VIEW - EXTENDED

3-D

SIDE VIEW - EXTENDED

SIDE VIEW RETRACTED

TOP VIEW - RETRACTED

FULLY ASSEMBLED MOUNT

ATTACH TV BRACKET TO TVSTEP 1

1.1 Select TV

Screw Diameter 1.2 Select TV Screw Length / Spacers

02 01

Too Short Too Long Correct

Inset Holes Cables Rounded Back

Only one screw size ﬁts your TV.

M6 M8

• Flat Back TV

[TV brackets

lay ﬂat on your TV]

NO SPACER SPACER NEEDED

• Flat Back TV with

Extra Space Needed

[for deep inset holes

or cable interference]

• Rounded or

Irregular Back TV

[TV brackets NOT

resting ﬂat on your TV]

A B

Use short TV screws 01 .

Spacers 03 not needed. Use long TV screws 01 and spacers 03 to

create extra space between the TV and TV bracket.

CAUTION: Verify adequate thread

engagement with your screw 01 , washer 02 ,

spacer 03 combination AND TV bracket 04 .

—Too short will not hold your TV.

—Too long will damage your TV.

NOTE: If your TV

included inset spacers or

adapters, use them UNDER

the mount hardware.

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included

and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE: Not all hardware included will be used.

M8 x 25mm

M6 x 12mm M6 x 20mm

M8 x 40mm

M8 x 50mm

M8 x 35mm

M8 x 16mm M8 x 20mm

M8 x 30 mm

2.5mm

5mm

22mm

M6 x 35mm

Parts and Hardware for STEP 1

TV Screws

(qty. 4 each) [Only one size ﬁts your TV] Washers

(qty. 4 each)

Spacers

[If necessary]

(qty. 4 each)

0302

M6/M8 M6/M8

(qty. 1)

TV Bracket

MOUNTING TABS

(ATTACHED)

RELEASE

CORD

(ATTACHED)

Screws

(ATTACHED)

1.3 Attach TV Bracket Assembly to TV

1PREP TV BRACKET 2ALIGN WITH TV HOLES

4CENTER ON TV

6TIGHTEN ALL SCREWS

5SECURE TV BRACKET

3LOOSELY ASSEMBLE

NO SPACER

SPACER NEEDED

02 01

NOTE: 400 x 400 hole patterns can skip to 3 below.

NOTE: The horizontal arms (and tabs M)

can be reversed top/bottom, if neeeded to

fit non-standard hole patterns.

REMOVE

LOOSEN

M M

ATTACH WALL PLATE TO WALL

STEP 2

Fischer UX10 x 60R

5/16 in. x 3½ in.

06 08

Parts and Hardware for STEP 2

Lag Bolt

Wall Plate

Template

Concrete Anchor

For concrete installations ONLY

CAUTION: Do not use in drywall or wood

Cover Plate

(Attached)

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;

contact Customer Service. Never use damaged parts!

For WOOD STUD

INSTALLATIONS

For CONCRETE

INSTALLATIONS

Follow 2A on PAGE 7.

Follow 2B on PAGE 8.

(qty. 1)

(qty. 5)

Max. 5/8 in. (1.5 cm)

Min. 16 in. (40.6 cm) Min. 3 ½ in. (8.9 cm)

Min. 1 ½ in. (3.8 cm)

CAUTION: Avoid potential

personal injury or property damage!

●Drywall covering the wall

must not exceed 5/8 in. (1.5 cm)

●Minimum wood stud size:

nominal 2 x 4 in. (5.1 x 10.2 cm)

actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm)

●Minimum horizontal space

between fasteners:16 in. (40.6 cm)

●Stud centers must be veriﬁed

2A Wood Stud Installation

1LOCATE 2VERIFY 3MARK

2 ¾ in. (6.9 cm)

7/32 in.

(5.5 mm)

4POSITION TEMPLATE

TIP: To calculate your precise wall plate location, check out

our HeightFinder at sanus.com [www.sanus.com/1172].

sanus.com

/1172

HeightFinder™

Visit 5DRILL

CAUTION:

Be sure you drill into the CENTER of the stud.

Skip to STEP 3 on PAGE 9.

6OPEN COVERS 7SECURELY TIGHTEN

All four lag bolts 07 MUST BE firmly tightened to prevent

unwanted movement of the wall plate 06 .Ensure the wall plate is

securely fastened to the wall before continuing on to the next step.

CAUTION: Avoid potential personal injury or property damage!

05 05

12 in.

(30 cm)

24 in.

(61cm)

12 in.

(30 cm)

TIP:

TIP: To calculate your precise wall plate location, check out

our HeightFinder at sanus.com [www.sanus.com/1172].

1POSITION TEMPLATE

Solid Concrete or Concrete Block Installation

●Mount the wall plate 06 directly onto the concrete surface

●Minimum solid concrete thickness: 8 in. (20.3 cm)

●Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm)

●Minimum horizontal space between fasteners:

TOP RAIL: 12 in. (30.5 cm)

BOTTOM RAIL: 24 in. (61.0 cm)

●FOR CONCRETE APPLICATIONS, TV bracket 09 must remain

centered in wall plate 06 . Keep this in mind when selecting

the wall plate location

CAUTION: Avoid potential personal injury or property damage!

sanus.com

/1172

HeightFinder™

Visit

Never drill into the mortar between blocks.

CAUTION:

Never drill into the mortar between blocks.

2DRILL

CAUTION:

All five lag bolts 07 MUST BE firmly tightened to prevent unwanted

movement of the wall plate 06 .Ensure the wall plate is securely

fastened to the wall before continuing on to the next step.

CAUTION: Avoid potential personal injury or property damage!

CAUTION:

Be sure the anchors 08 are seated ﬂush

with the concrete surface.

CAUTION:

5SECURELY TIGHTEN

3OPEN COVERS

3/8 in.

(10 mm)

3 in. (7.6 cm)

34 INSERT ANCHORS

ATTACH TV TO WALL PLATE

STEP 3

3/32 in.

5/32 in.

10-32 x 3/8 in.

Parts and Hardware for STEP 3

Arm Assembly

LOCKING SCREWS

(ATTACHED)

CABLE COVERS

(ATTACHED)

Securement

Screw

Hex Key

1HANG

For CONCRETE APPLICATIONS:

The arm assembly 09 MUST remain centered in wall plate 06 .

CAUTION: Avoid potential personal injury or property damage!

HEAVY! You may need

assistance with this step.

2SECURE

3CLOSE COVERS

Always make sure both locking screws Sare tightened, so the arm

assembly 09 is securely fastened to wall plate 06 .

CAUTION: Avoid potential personal injury or property damage!

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included

and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

3.1 Attach the Arm Assembly to the Wall Plate

(qty. 1) (qty. 1)

(qty. 1)

MANAGE CABLES

1ROUTE CABLES 2ATTACH COVERS

Pull arm 09 to its full extension, to leave enough slack

and prevent stretching the cables when the arms are moved.

IMPORTANT:

1HANG YOUR TV

HEAVY! You may

need assistance

with this step.

2ATTACH

Always make sure your securement screw 10 is tightened, so the TV is securely fastened to the arm assembly 09 .

CAUTION: Avoid potential personal injury or property damage!

3SECURELY TIGHTEN

09 10

3.2 Hang TV onto Arm Assembly

Inhaltsverzeichnis

Andere Sanus Rack & Stand Handbücher

Sanus

Sanus WSS22 Bedienungsanleitung

Sanus

Sanus WSEDM2 Bedienungsanleitung

Sanus

Sanus CFR518RR Bedienungsanleitung

Sanus

Sanus WSEDM1-B2 Bedienungsanleitung

Sanus

Sanus SAN213 Bedienungsanleitung

Sanus

Sanus VST4 Bedienungsanleitung

Sanus

Sanus VSL4 Bedienungsanleitung

Sanus

Sanus MF110 Bedienungsanleitung

Sanus

Sanus LMT1 Bedienungsanleitung

Sanus

Sanus VisionMount VMPl50A Bedienungsanleitung

Sanus

Sanus Sanus VisionMount ML22 Bedienungsanleitung

Sanus

Sanus AMAZON ECHO SHOW 5 Bedienungsanleitung

Sanus

Sanus SASB1 Bedienungsanleitung

Sanus

Sanus SAN10 Bedienungsanleitung

Sanus

Sanus ALF109 Bedienungsanleitung

Sanus

Sanus VisionMount VMPR1 Bedienungsanleitung

Sanus

Sanus SECURA QSL12 Bedienungsanleitung

Sanus

Sanus HTB4B Bedienungsanleitung

Sanus

Sanus SA808 Bedienungsanleitung

Sanus

Sanus F215 Bedienungsanleitung

Sanus

Sanus A701 Bedienungsanleitung

Sanus

Sanus BLT2 Bedienungsanleitung

Sanus

Sanus OLF24-B2 Bedienungsanleitung

Sanus

Sanus Trillium 53 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung