Schwinn 206 Recumbent Bike Bedienungsanleitung

206Schwinn® Recumbent Exercise Bike

Parts List

Full Size Hardware Chart

Product Illustration

Assembly Instructions

206Recumbent Exercise

Bike

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, please read the following

precautions before using the Schwinn 206.

1. It is the responsibility of the owner to ensure that all users of this equipment

are adequately informed of all precautions.

2. Read all instructions in this manual and in the accompanying literature and

follow them carefully before using the equipment.

3. If you feel pain or dizziness at any time while exercising, stop immediately and

consult your physician.

4. Use this equipment only on a solid level surface. Cover the floor or carpet

beneath this equipment for protection.

5. Inspect and tighten all parts often. Replace any worn parts immediately.

6. Keep small children and pets away from this equipment at all times.

7. Always wear athletic shoes for foot protection. Do not wear loose or dangling

clothing while using exercise bicycle.

8. Care should be taken when mounting or dismounting the exercise bicycle.

9. Read all warnings posted on the exercise bicycle.

10. User weight limit on the Schwinn 206is 300 lbs.

This Schwinn 206is intended for home use only. Do not use this equipment in

any non-residential environment.

WARNING: Before beginning this or any exercise program, consult your

physician. This is especially important for persons over the age of 35 or persons

with pre-existing health problems. Read all instructions before using. We

assume no responsibility for personal injury or property damage sustained by or

through the use of this product.

206Schwinn Recumbent Bike Parts List,

Hardware Chart, and Assembly Instructions

Assembly of the 206Recumbent Bike is divided into 5 easy stages; each

comprised of only a few setup steps. Before proceeding with the assembly,

please read over the easy to follow instructions to familiarize yourself with the

process.

• A flat area of 5’ x 7’ is suggested to assemble the 206exercise bike.

• You will need the following tools to complete the assembly:

5mm Allen wrench (supplied)

Open wrench 13mm, 14mm, 15mm (supplied)

Phillips screwdriver (supplied)

Also, to ensure quick and easy set up of the 206Recumbent Bike, please verify

the size and quantity of each of the enclosed assembly hardware. Included is a

handy full size hardware chart and parts list of each of the required assembly

hardware. Simply match up the corresponding hardware to each full size

drawing.

Parts List

Check Quantity Description Reference #

__ 8 Allen Bolt M8 x P1.25 x 45mm 1

__ 15 Flat Washer 2

__ 1 Seat Pin Adjustment Knob 3

__ 1 Seat 4

__ 1 Seat Back 5

__ 1 Handlebar Assembly 6

__ 8 Flat Washer ф8*ф16*2T 7

__ 1 Seat Frame Assembly 8

__ 1 Seat Rail 9

__ 1 Rear Stabilizer Tube 10

__ 1 End Cap (for #9) 11

__ 1 Buffer 12

__ 1 Buffer Plate 13

__ 2 Flat Washer for 12/13 14

__ 2 Screw for 12/13 15

__ 2 Carriage Bolt M8 x P1.25 x 75mm 16

__ 1 Front Stabilizer Tube (w/wheels) 17

__ 1pr Pedal Strap (Left & Right) 18

__ 8 Curved Washer 19

__ 4 Acorn Nut 20

__ 1pr Pedals (Left & Right) 21

__ 19 Allen Bolt M8 x P1.25 x 16mm 22

__ 2 Bolt Cover 23

__ 2 Carriage Bolt M8 x P1.25 x 90mm 24

__ 1 Computer Cable (Lower) 25

__ 1 HR Cable (Lower) 26

__ 1 Console Mast Cover 27

__ 1 Computer Cable (Upper) 28

__ 1 HR Cable (Upper) 29

__ 1 Console Mast 30

__ 1 Main Unit 31

__ 1 Lower Base Frame 32

__ 4 Computer Mounting Screws 33

__ 1 Computer 34

__ 1 HR Cable (Seat Rail) 47

__ 2 Water Bottle Cage Mounting Screws 56

__ 1 Water Bottle Cage 57

__ 1 AC Adapter 50

Hardware Chart

Allen Bolt M8xP1.25x16mm

Stage#2

Allen Bolt M8xP1.25x mm

Note: Please verify you have all correct parts and quantities before assembling

unit.

If you are missing items, are short quantities, or have damaged components,

please call 1-800-4-MY-HOME for assistance.

Flat Washer for ф8*ф16*2T

Flat Washerф8*ф19*2T

Allen Bolt M8xP1.25x16mm

Flat Washerф8*ф19*2T Flat Washer

Carriage Bolt M8xP1.25x75mm Curved Washer

Stage#3

Acorn Nut M8

Stage#1

Flat Washerф8*ф19*2T

Flat Washer ф8*ф16*2T

Allen Bolt M8xP1.25x16mm

Stage#4

Curved Washer

Acorn Nut M8

Carriage Bolt M8xP1.25x mm

Allen Bolt M8xP1.25x16mm

Curved Washer

Stage#5

Allen Key

Screwdriver

206Assembly Drawing with Reference

Numbers

22 26

19 25

Replacement Parts List

Reference # Description

3 Seat Pin Adjustment Knob

4 Seat

5 Seat Back

6 Handlebar Assembly

9 Seat Rail

10 Rear Stabilizer Tube

11 Seat Rail End Cap

12 Buffer

13 Buffer Plate

14 Flat Washer

15 Screws

16 Carriage Bolt M8 x P1.25 x 75mm

17 Front Stabilizer Tube (w/wheels)

20 Acorn Nut

21 Pedals(Left & Right)

22 Allen Bolt M8 x P1.25 x 16mm

23 Bolt Cover

24 Carriage Bolt M8 x P1.25 x 90mm

25 Computer Cable (Lower)

26 HR Cable (Lower)

27 Console Mast Cover

28 Computer Cable (Upper)

29 HR Cable (Upper)

33 Computer Mounting Screws

ottle Cage Mounting Screw

30 Console Mast

32 Lower Base Frame

34 Computer

56 Water B

57 WaterBottleCage

Instructions

IMPORTANT!: To ensure ease of assembly please verify the size and

quantity of all the required assembly hardware and parts with the enclosed

parts list and full size hardware chart.

b ken d wn inEach step of the assembly process has been ro o to s o5 ea y-to-f llow

Assembly Stage #1

Assemble Seat and Handle Bar

Assembly hardware required: (8) M8 Allen Bolts 45 mm long (item #1)

(8) Flat Washers Ø8*Ø19*2T (item #2)

(4) M8 Allen Bolts 16 mm long (item #22)

(4)Flat Washer Ø8* Ø 16*2T(item #7)

Step 1: Attach HANDLEBAR ASSEMBLY (#6) to SEAT FRAME (#8) with the 4

ALLEN BOLTS (#22) and 4 FLAT WASHERS (#7). Tighten bolts with the

provided Allen wrench.

Step 2: Attach SEAT (#4) to SEAT FRAME (#8) with 4 ALLEN BOLTS (#1) and 4

WASHERS (#2). Tighten Bolts.

stages. Please take just a few moments to read over these instructions to

familiarize yourself with the process to make assembly quick and trouble-fre

TSStep 3: Attach SEAT BAC ) with 4 ALLEN BOL

(#1) and 4 WASHERS (#2). Tighten Bolts.

Note: Finished seat should look like picture below:

K (#5) to SEAT FRAME (#8

l to Seat Assembly

Assembly hardware required: (4) M8 Allen Bolts 16mm (item #22)

(4) Flat Washers Ø8 * Ø19 * 2T(item#2)

Step 4: Attach SEAT RAIL (#9) to REAR STABILIZER TUBE (#10) with 4 FLAT

WASHERS (#2) and 4 ALLEN BOLTS (#22). Tighten bolts.

Step 5: Place END CAP (#11) on the end of the SEAT RAIL (#9). Make sure the

HR CABLE (#47) is strung through the exit slot on the SEAT RAIL before end cap is

secured.

Step 6: Insert SEAT PIN ADJUSTMENT KNOB (#3) into SEAT FRAME (#8).

Slide the seat assembly from stage 1 onto the SEAT RAIL (#9). Tighten seat

assembly to the rail with the SEAT PIN ADJUSTMENT KNOB (#3). Insert HR

CABLE (#47) into HR input on the back of the seat assembly.

Step 7: Attach BUFFER (#12), BUFFER PLATE (#13), FLAT WASHER (#14) and

SCREWS (#15) to the bottom of the seat rail as illustrated above.

Assembly Stage #2

Attach Rear Stabilizer and Seat Rai

Andere Handbücher für 206 Recumbent Bike

Inhaltsverzeichnis

Andere Schwinn Heimtrainer Handbücher

Schwinn

Schwinn 700IC Bedienungsanleitung

Schwinn

Schwinn 222 Bedienungsanleitung

Schwinn

Schwinn 9-7300 A.C. Power Bedienungsanleitung

Schwinn

Schwinn Fitness 112 Bedienungsanleitung

Schwinn

Schwinn 126 Upright Bike Bedienungsanleitung

Schwinn

Schwinn 270 Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn EVO Airdyne Bedienungsanleitung

Schwinn

Schwinn 140 Bedienungsanleitung

Schwinn

Schwinn IC Pro Bedienungsanleitung

Schwinn

Schwinn 170 Journey 1.5 Bedienungsanleitung

Schwinn

Schwinn NAUTILUS 113 Bedienungsanleitung

Schwinn

Schwinn 240 Bedienungsanleitung

Schwinn

Schwinn 102 Bike Bedienungsanleitung

Schwinn

Schwinn A.C. Sport Bedienungsanleitung

Schwinn

Schwinn 10 Series Bike Bedienungsanleitung

Schwinn

Schwinn 101/201 Bedienungsanleitung

Schwinn

Schwinn SC7 Bedienungsanleitung

Schwinn

Schwinn 126 Upright Bike Bedienungsanleitung

Schwinn

Schwinn 131 Upright Bike Bedienungsanleitung

Schwinn

Schwinn A20 Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn SR23 Bedienungsanleitung

Schwinn

Schwinn AD6 Bedienungsanleitung

Schwinn

Schwinn SB13 Bedienungsanleitung

Schwinn

Schwinn 220 Recumbent Bike 2012 model Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

TOORX

TOORX BRX85 Bedienungsanleitung

Matrix

Matrix KranKcycle Bedienungsanleitung

Weslo

Weslo Vector 302 Kurzanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

NordicTrack

NordicTrack Gxr 4.2 Bike Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung

Stamina

Stamina 15-0340A Bedienungsanleitung