Schwinn Fitness 122 Bedienungsanleitung

122/123 Schwinn® Upright Exercise Bike

Parts List

Full Size Hardware Chart

Product Illustration

Assembly Instructions

e-mail from: Keith Weier date: 7/14/2005 page:1/16

FITNESS SAFEGUARDS AND WARNINGS

Before starting any exercise program, consult with your physician or health

professional. He or she can help establish the correct exercise frequency,

intensity (target heart rate zone) and time appropriate for your particular age and

condition.

The following 3 warnings listed below are also located on the computer console

mast of the exercise bike. Failure to follow any of these safeguards may result in

injury or serious health problems.

•Read and understand the Owner’s Manual and operation instructions prior

to use. If you do not have an Owner’s Manual, call 1-800-864-1270 to

obtain one.

•If you feel any unusual pain or tightness in your chest, shortness of breath

or dizziness, feel faint or have any discomfort while you exercise, STOP!

Consult your physician.

•Keep children and pets away.

Other Important Safeguards and Warnings

•Do not exceed maximum user weight of 136 kg (300 lb.)

•It is the responsibility of the owner to ensure that all users of this

equipment are adequately informed of all precautions.

•Use this equipment only on a solid level surface. Cover the floor or carpet

beneath this equipment for protection.

•Read the Warning Label located on the computer console mast.

•Do not place fingers or any other objects into moving parts of the exercise

equipment.

•This equipment is designed for use by persons aged 13 years and older.

Teenagers should be supervised.

•Always wear athletic shoes for foot protection. Avoid wearing loose

clothing that may become entangled in the drive mechanism.

•Warn bystanders to keep a safe distance, especially from the moving

pedals. Do not allow anyone to touch the bike while it is in operation.

•This equipment is for home use only. Do not use in a commercial,

institutional, or rental setting.

•Care should be taken when mounting or dismounting the exercise bicycle.

•Do not operate in damp or wet conditions.

•Follow proper set-up and guidance as outlined in the Owner’s Manual and

Assembly Instructions. Only use the bike as outlined in usage instructions

of the Owner’s Manual.

•Prior to each use inspect the bike for loose, broken, or worn parts. Do not

use if found in this condition. The safety of the equipment can only be

e-mail from: Keith Weier date: 7/14/2005 page:2/16

ensured if it is regularly examined and maintained. (See Maintenance

section of the Owner’s Manual)

•Refer to the Maintenance section in the Owner’s Manual and disconnect

power supply before servicing the bike.

•Replace Warning Label if damaged, illegible, or removed.

•We recommend that a minimum distance of 1 meter (39 inches)

surrounding the bike is kept clear of all obstructions, including children,

bystanders, and pets. This is to ensure adequate clearance for easy

access to the bike and to avoid any possible contact with the moving

pedals

122/123 Schwinn Upright Bike Parts List,

Hardware Chart, and Assembly Instructions

Assembly of the 122/123 Upright Bike is divided into 7 easy stages; each

comprised of only a few setup steps. Before proceeding with the assembly,

please read over the easy to follow instructions to familiarize yourself with the

process.

• A flat area of 4’ x 6’ is suggested to assemble and properly use the 122/123

exercise bike.

• You will need the following tools to complete the assembly:

6mm Allen wrench (supplied)

Open wrench 13mm, 14mm, 15mm (supplied)

Phillips screwdriver (supplied)

Also, to ensure quick and easy set up of the 122/123 Upright Bike, please verify

the size and quantity of each of the enclosed assembly hardware. Included is a

handy full size hardware chart and parts list of each of the required assembly

hardware. Simply match up the corresponding hardware to each full size

drawing.

e-mail from: Keith Weier date: 7/14/2005 page:3/16

Parts List

Check Quantity Description Reference #

__ 1 Computer 1

__ 1 Handlebar Assembly 2

__ 1 Upper Heart Rate Cable 4

__ 4 Computer Mounting Screws 5

__ 1 Computer/Handlebar Mast 6

__ 4 Curved Washers 7

__ 4 Allen Bolt M8 x P1.25 x 16mm 8

__ 1 Computer Cable (upper) 9

__ 1 Computer Cable (lower) 10

__ 4 Flat Head Screw8x16L 11

__ 1 Front Stabilizer tube (w/wheels) 12

__ 1pr Pedals 13

__ 1 Main Unit 14

__ 1 Rear Stabilizer Tube 15

__ 1 Seat Post Adjustment Knob 16

__ 1 Seat Post 17

__ 1 Water Bottle 18

__ 2 Screw 5 x 14L 19

__ 1 Bottle Cage 20

__ 1 Seat 21

__ 1 T-Knob 22

__ 1 T-Knob Bushing 23

__ 1 Spring Washer 24

__ 1 Flat Washer 7x12x1T 25

__ 1 Handlebar Clamp 26

__ 1 Front Handlebar Cover 27

__ 1 Rear Handlebar Cover 28

__ 4 Screw M3x14L 29

__ 1 Adjustment Knob 30

__ 1 Power Plug 67

e-mail from: Keith Weier date: 7/14/2005 page:4/16

Hardware Chart

Stage#5

Stage#1

Stage#4

(Pedal Wrench)

24 Spring Washer 25 Flat Washer 1

Allen Key

26 (1) 22 1

Screwdriver 1

Box Spanner 1

23 Bushing£ p7£p12*15MM (1)

Screws M8xP1.25x16mm

Screws M3x14mm

Note: Please verify you have all correct parts and quantities before assembling unit.

If you are missing items, are short quantities, or have damaged components,

please contact Schwinn at 1.800.864.1270

e-mail from: Keith Weier date: 7/14/2005 page:5/16

122/123 Assembly Drawing with

Reference Numbers

e-mail from: Keith Weier date: 7/14/2005 page:6/16

Replacement Parts List

Reference # Description Part #

1 Computer 18143 (112)

18142 (113)

2 Handlebar Assembly 18154

4 Upper Heart Rate Cable 18175

5 Computer Mounting Screws 18094

6 Computer/Handlebar Mast 18160

7 Curved Washers 18098

8 Allen Bolt M8 x P1.25 x 16mm 18001

9 Computer Cable (upper) 18046

11 Flat Head Screw 8x16L 18136

12 Front Stabilizer tube (w/wheels) 18153

13 Pedals 18048

15 Rear Stabilizer Tube 18159

16 Seat Post Adjustment Knob 18132

17 Seat Post 18128

18 Water Bottle 85012

19 Screw 5 x 14L 18137

20 Bottle Cage 18005

21 Seat 18103

22 T-Knob 18043

23 T-Knob Bushing 18044

24 Spring Washer 95623

25 Flat Washer 7x12x1T 30126

26 Handlebar Clamp 18124

27 Front Handlebar Cover 18172

28 Rear Handlebar Cover 18173

29 Screw M3x14L 18135

30 Adjustment Knob 18133

67 Power Plug 18007

N/A Right Shroud 18033

N/A Left Shroud 18025

Instructions

IMPORTANT!: To ensure ease of assembly please verify the size and

quantity of all the required assembly hardware and parts with the enclosed

parts list and full size hardware chart.

e-mail from: Keith Weier date: 7/14/2005 page:7/16

Each step of the assembly process has been broken down into 7 easy-to-follow

stages. Please take just a few moments to read over these instructions to

familiarize yourself with the process to make assembly quick and trouble-free.

Assembly Stage #1

Attach Front and Rear Stabilizer Tubes to Main Unit

Assembly hardware required: (4) Flat Head Screw 8x16L (item #11)

1. Attach the FRONT STABILIZER TUBE (#12) to the MAIN UNIT (#14) by

inserting the two FLAT HEAD SCREWS (#11) into the holes in the stabilizer and

front of the main unit. Make sure that the wheels on the front stabilizer tube are

facing away from the main unit. Tighten bolts securely

2. Attach the REAR STABILIZER TUBE (#15) to the MAIN UNIT (#14) by

inserting the two FLAT HEAD SCREWS (#11) into the holes in the stabilizer and

rear of the main unit. Make sure that the leveler adjustments on the rear stabilizer

tube are facing up. Tighten bolts securely.

Assembly Stage #2

Attach Pedals to the Crank Arms on Main Unit

e-mail from: Keith Weier date: 7/14/2005 page:8/16

Assembly hardware required: NONE

1. Attach right PEDAL (#13R) to the right crank arm on the RIGHT CRANK

(#38R). Thread the pedal onto the crank arm and then tighten with pedal wrench.

2. Attach left PEDAL (#13L) to the left crank arm on the LEFT CRANK (#38L).

Thread the pedal onto the crank arm and then tighten with pedal wrench. Note:

There is a right pedal and a left pedal, marked by R and L. The threading

on the left pedal is reversed from the right pedal. Counterclockwise rotation

tightens while Clockwise rotation loosens on the left pedal. To avoid

stripping of the threads be careful to use the proper pedal.

3. Attach PEDAL STRAPS (#28) to each PEDAL (#13). Again each strap is labeled

with an R or an L corresponding to the right and left pedal straps.

Assembly Stage #3

Attach Seat Post, Slider, and Pad to Main Unit

e-mail from: Keith Weier date: 7/14/2005 page:9/16

Assembly Hardware Required: NONE

1. Insert SEAT POST (#17) into corresponding hole in MAIN UNIT (#14). Tighten

down with SEAT POST ADJUSTMENT KNOB. (#16).

2. Insert SEAT (#21) onto SEAT SLIDER (#17). Tighten bolt on underside of the

seat with a wrench until seat no longer twists or tilts.

3. Seat Adjustment: Adjust the seat height by unscrewing seat post adjustment knob

and tightening into appropriate adjustment hole on the seat post. Leg should be

almost fully extended at the bottom of the pedal stroke. Fore and Aft seat position

can be adjusted with the seat slider knob. If the seat wobbles make sure that both

knobs (#16 and #30) are fully tightened.

e-mail from: Keith Weier date: 7/14/2005 page:10/16

Andere Handbücher für Fitness 122

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Schwinn Heimtrainer Handbücher

Schwinn

Schwinn IC2 Indoor Cycling Bike Bedienungsanleitung

Schwinn

Schwinn 270 Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn 145 Bedienungsanleitung

Schwinn

Schwinn 206 Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn IC Pro Bedienungsanleitung

Schwinn

Schwinn 240 Bedienungsanleitung

Schwinn

Schwinn 101 Upright Bike Bedienungsanleitung

Schwinn

Schwinn 270 Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn 220 Recumbent Bike 2012 model Bedienungsanleitung

Schwinn

Schwinn active 10 Series Bedienungsanleitung

Schwinn

Schwinn Airdyne Bedienungsanleitung

Schwinn

Schwinn IC2 Indoor Cycling Bike Bedienungsanleitung

Schwinn

Schwinn NAUTILUS 113 Bedienungsanleitung

Schwinn

Schwinn IC PRO Bike Betriebsanleitung

Schwinn

Schwinn IC2 Indoor Cycling Bike Bedienungsanleitung

Schwinn

Schwinn Airdyne AD2 Bedienungsanleitung

Schwinn

Schwinn Fitness 212 Bedienungsanleitung

Schwinn

Schwinn A.C. Sport Bedienungsanleitung

Schwinn

Schwinn Airdyne AD2 Bedienungsanleitung

Schwinn

Schwinn 207P Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn IC2i Bedienungsanleitung

Schwinn

Schwinn Fitness 122 Bedienungsanleitung

Schwinn

Schwinn 10 Series Bike Bedienungsanleitung

Schwinn

Schwinn 270 Recumbent Bike Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

TOORX

TOORX BRX85 Bedienungsanleitung

Matrix

Matrix KranKcycle Bedienungsanleitung

Weslo

Weslo Vector 302 Kurzanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

NordicTrack

NordicTrack Gxr 4.2 Bike Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung

Stamina

Stamina 15-0340A Bedienungsanleitung