Schwinn 145 Bedienungsanleitung
ASSEMBLY MANUAL / OWNER'S MANUAL
Manual en Español Latino Americano:
http://www.schwinnfitness.com
2
Important Safety Instructions - Assembly 3
Safety Warning Labels / Serial Number 4
Specifications 4
Parts 5
Tools 5
Hardware 6
Before Assembly 6
Assembly 7
Moving the Bike 15
Leveling the Bike 15
Important Safety Instructions - Owner's 16
Features 17
Console Features 18
Remote Heart Rate Monitor 19
Operations 21
Adjustments 21
Quick Start / Manual Program 22
Workout Program Selection 22
Schwinn™Advantage User Setup Mode 23
Profile Programs 25
Pausing or Stopping 26
Results/Cool Down Mode 27
User Statistics 27
Console Setup Mode 28
Maintenance 29
Troubleshooting 31
Warranty 33
TABLE Of CONTENTS
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369,
[email protected] | outside U.S. +01-360-859-5180, [email protected] | Printed in China | © 2012 Nautilus, Inc.
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty , go to: www.SchwinnFitness.com/register
Or call 1 (800) 605–3369.
If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).
3
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
• Keepbystandersandchildrenawayfromtheproductyouareassemblingatalltimes.
• Donotconnectpowersupplytothemachineuntilinstructedtodoso.
• Donotassemblethismachineoutdoorsorinawetormoistlocation.
• Makesureassemblyisdoneinanappropriateworkspaceawayfromfoottrafcandexposuretobystanders.
• Somecomponentsofthemachinecanbeheavyorawkward.Useasecondpersonwhendoingtheassemblysteps
involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
• Setupthismachineonasolid,level,horizontalsurface.
• Donottrytochangethedesignorfunctionalityofthismachine.Thiscouldcompromisethesafetyofthismachineandwill
void the warranty.
• Ifreplacementpartsarenecessary,useonlygenuineNautilus®replacementpartsandhardware.Failuretousegenuine
replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.
• Donotuseuntilthemachinehasbeenfullyassembledandinspectedforcorrectperformanceinaccordancewiththe
Manual.
• DonotoperatethismachineuntilyoureadandunderstandthecompleteOwner’sManualprovidedonline.Keepthe
Owner’sManualforfuturereference.
• Doallassemblystepsinthesequencegiven.Incorrectassemblycanleadtoinjuryorincorrectfunction.
• Thisproductcontainsmagnets.Magneticeldscaninterferewiththenormaluseofcertainmedicaldevicesataclose
range.Usersmaycomeintoproximityofthemagnetsintheassembly,maintenance,and/oruseoftheproduct.Giventhe
obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical provider
in connection with the use of this equipment. Please consult the “Safety Warning Labels and Serial Number” section to
determine the location of the magnets on this product.
IMpORTANT SAfETY INSTRUCTIONS
-ASSEMBLY
4
SAfETY WARNINg LABELS ANd SERIAL NUMBER /
SpECIfICATIONS
•
•
•
•
•
•
300lbs. (136kg).
Keep children away.
Prior to use, read and understand the
Owners Manual.
Injury or death is possible if Caution is not
used while using this machine.
The maximum user weight for this
machine is 300 lbs (136 Kg).
Replace any “Caution” “Warning” or
“Danger” label that is illegible, damaged,
or removed.
This machine is for home use only.
•
•
•
•
•
•
Maximum User Weight: 300 lbs. (136 kg)
Power Requirements:
Operational Voltage: 9VDC
Operating Current: 1.0 A
Regulatory Approvals:
AC Power Adapter: UL listed, CSA certified (or equivalent),
Rated 120V 60Hz Input, 9VDC, 1.0A
Output. Class 2 or LPS.
This product, its packaging, and components contain
chemicals known to the State of California to cause cancer,
birth defects, or reproductive harm. This Notice is provided
inaccordancewithCalifornia’sProposition65.Ifyouwould
like additional information, please refer to our website at
www.nautilus.com/prop65.
52”
(132.1 cm)
42” (107.6 cm) 21” (53.3 cm)
Serial number
FCC Compliance
Changesormodicationstothisunitnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidthe
user’sauthoritytooperatetheequipment.
The power supply complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This power supply has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandreceiver.
•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
5
pARTS / TOOLS
1
2
3
4
5
6
7
8
9
10
11 12 13 14
15
Tools
Included Not Included
6 mm
(recommended)
Item Qty Description Item Qty Description
1 1 Main Frame 9 1 Handlebar
2 1 Front Stabilizer 10 1 Console Bracket
3 1 Rear Stabilizer 11 1 Console
4 1 Pedal, Left 12 1 AC Adapter
5 1 Pedal, Right 13 1 End Cap, Right
6 1 Seat Post 14 1 End Cap, Left
7 1 Seat 15 1 Water Bottle Holder
8 1 Console Mast
Note:MediaCableisintheConsolebox.
6
HARdWARE / BEfORE ASSEMBLY
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard,
levelsurface.Allowaworkoutareaofaminimum90"x69"(2.3mx1.8m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the “Important Safety Instructions” before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-
wise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly requires 2 people.
Item Qty Description Item Qty Description
A 1 CarriageBolt,M8x85 H 1 Flat Washer, M12
B 4 Cap I 4 Curved Washer, M8
C 1 Console adjustment knob J 2 Flat Washer, M8
D 1 T-Nut K1 Lock Nut, M8
E 1 HexHeadBolt,M8x85 L 4 FlatHeadHexScrew,M8x16
F 4 ButtonHeadHexBolt,M8x16 M 2 PhillipsHeadScrew,M3x8
G1 Handlebar adjustment knob
A B C D E F G
H I JK L M
A B C D E F G
H I JK L M
7
1. Install Stabilizers to Frame
Note:MakesuretheSchwinn®decalontheRearStabilizerfacesoutwardfromthemachine.
2. Attach Pedals to Frame Assembly
Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is
based from a seated position on the bike. The Left Pedal has an “L”, the Right Pedal an “R”.
4
5
1
3
X4
L
14
13
2
X2
M
ASSEMBLY
8
3. Loosen and Pull the Seat Post Adjustment Knob to Attach Seat Post to Frame Assembly
NOTICE: TheAdjustmentKnobispre-installedontheMainFrame.MakesuretheAdjustmentKnobengages
the Seat Post.
!Do not set the Seat Post position higher than the stop mark (MAX) on the tube.
4. Attach Seat to Frame Assembly
6
7
9
5. Connect Console Mast Cable to Frame Assembly Cable
NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not crimp Console Cable.
6. Attach Console Mast to Frame Assembly
NOTICE: Do not crimp the cables.
8
F
X4
I
10
7. Attach Handlebars to Frame Assembly
Note: Put the T-nut (I) into the Handlebar slider and align it with the second hole (9a) to install the Console Slider
AdjustmentKnob(J)andwasher(L).PushtheConsoleMastcableslightlydownandpushtheHandlebar
into the Handlebar slider until the holes are aligned to pull the cable up.
NOTICE: Do not crimp the cables. Make sure that the lower Heart Rate cable (9b) is connected.
9
G
H
9
D
9a
9b
9b
9
Inhaltsverzeichnis
Andere Schwinn Heimtrainer Handbücher
Schwinn
Schwinn 140 Bedienungsanleitung
Schwinn
Schwinn DX900 Bedienungsanleitung
Schwinn
Schwinn 270 Recumbent Bike Bedienungsanleitung
Schwinn
Schwinn 270i Recumbent Bike Bedienungsanleitung
Schwinn
Schwinn 130i Upright Bike Bedienungsanleitung
Schwinn
Schwinn 120 Bedienungsanleitung
Schwinn
Schwinn 230 Recumbent Bike Bedienungsanleitung
Schwinn
Schwinn Classic Bedienungsanleitung
Schwinn
Schwinn 226 Recumbent Bike Bedienungsanleitung
Schwinn
Schwinn 520 Reclined Elliptical Bedienungsanleitung
Schwinn
Schwinn IC4 Bedienungsanleitung
Schwinn
Schwinn 230 Recumbent Bike 2013 model Bedienungsanleitung
Schwinn
Schwinn Airdyne Bedienungsanleitung
Schwinn
Schwinn Fitness 231 Bedienungsanleitung
Schwinn
Schwinn U130i Bedienungsanleitung
Schwinn
Schwinn IC ELITE Bedienungsanleitung
Schwinn
Schwinn IC2i Bedienungsanleitung
Schwinn
Schwinn 170 Journey 1.5 Bedienungsanleitung
Schwinn
Schwinn AirDyne Pro Bedienungsanleitung
Schwinn
Schwinn 10 Series Bike Bedienungsanleitung
Beliebte Heimtrainer Handbücher anderer Marken
Stamina
Stamina 1310 Bedienungsanleitung
American Fitness
American Fitness SPR-BK1072A Bedienungsanleitung
Cateye
Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung
BH FITNESS
BH FITNESS H9158H Bedienerhandbuch
Body Sculpture
Body Sculpture BC-7220G Bedienungsanleitung
Cateye
Cateye EC-2300 Bedienungsanleitung
