SICK GTB2 Flat Series Bedienungsanleitung
OPERATING INSTRUCTION
GTB2 Flat
Miniature photoelectric sensors
Described product
G2F
GTB2F
Manufacturer
SICK AG
Erwin-Sick-Str. 1
79183 Waldkirch
Germany
Production location
SICK Product Center Asia Pte. Ltd.
Singapore
www.sick.com.sg
Legal information
This work is protected by copyright. Any rights derived from the copyright shall be
reserved for SICK AG. Reproduction of this document or parts of this document is only
permissible within the limits of the legal determination of Copyright Law. Any modifica‐
tion, abridgment or translation of this document is prohibited without the express writ‐
ten permission of SICK AG.
The trademarks stated in this document are the property of their respective owner.
© SICK AG. All rights reserved.
Original document
This document is an original document of SICK AG.
2006/42/EC
NO
SAFETY
8023328.18HX | SICK
Subject to change without notice 3
Contents
1 General safety notes......................................................................... 5
2 Notes on UL approval........................................................................ 5
3 Intended use...................................................................................... 5
4 Operating and status indicators...................................................... 5
5 Mounting............................................................................................. 6
6 Electrical installation........................................................................ 6
7 Commissioning.................................................................................. 7
8 Troubleshooting................................................................................. 9
9 Disassembly and disposal............................................................... 10
10 Maintenance...................................................................................... 10
11 Technical specifications................................................................... 11
11.1 Dimensional drawing................................................................................ 11
11.2 Light spot diameter................................................................................... 12
CONTENTS
48023328.18HX | SICK
Subject to change without notice
1 General safety notes
■Read the operating instructions before commissioning.
■
Connection, mounting, and configuration may only be performed by trained
specialists.
■
2006/42/EC
NO
SAFETY
Not a safety component in accordance with the EU Machinery Directive.
■
When commissioning, protect the device from moisture, contamination and
UV radiation (sun light).
■These operating instructions contain information required during the life cycle of
the sensor.
2 Notes on UL approval
The device must be supplied by a Class 2 source of supply.
UL Environmental Rating: Enclosure type 1
3 Intended use
The GTB2F is an opto-electronic photoelectric proximity sensor (referred to as “sensor”
in the following) for the optical, non-contact detection of objects, animals, and persons.
If the product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
4 Operating and status indicators
Photoelectric proximity sensor with background suppression.
12
Figure 1: Dimensional drawing
GENERAL SAFETY NOTES 1
8023328.18HX | SICK
Subject to change without notice 5
1LED indicator green: supply voltage active
2LED indicator yellow: status of received light beam
5 Mounting
Mount the sensor using a suitable mounting bracket (see the SICK range of acces‐
sories).
Note the sensor's maximum permissible tightening torque of 0.1 Nm.
Note the preferred direction of the object relative to the sensor, cf. see "Dimensional
drawing", page 11.
6 Electrical installation
The sensors must be connected in a voltage-free state (UV = 0 V). The following informa‐
tion must be observed, depending on the connection type:
– Plug connection: note pin assignment: when the lid is open, the male connector
can be swiveled horizontally and vertically.
– Cable: wire color
Only apply voltage/switch on the voltage supply (UV > 0 V) once all electrical connec‐
tions have been established.
Explanation of the connection diagram (Tables pin assignment):
Q = switching outputs
n. c. = not connected
DC: 10 ... 30 V DC
Table 1: Pin assignment
GXX2F(S)
-X14xx
-X54xx
1BN + (L+) + (L+)
2- - -
3BU - (M) - (M)
4BK Q Q
BK: 0.1 mm2, AWG30
BU+BN: 0.127 mm2, AWG28
2
1
4
3
5 MOUNTING
68023328.18HX | SICK
Subject to change without notice
Table 2: Switching output
PNP Q
(≤ 50 mA)
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
Q
(≤ 50 mA)
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
NPN Q
(≤ 50 mA)
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
Q
(≤ 50 mA)
+ (L+)
Q
– (M)
+ (L+)
Q
– (M)
7 Commissioning
1Alignment
Align sensor on object. Select the position so that the red emitted light beam hits the cen‐
ter of the object. You must ensure that the optical opening (front screen) of the sensor is
completely clear.
ELECTRICAL INSTALLATION 6
8023328.18HX | SICK
Subject to change without notice 7
Figure 2: Alignment
Figure 3: Alignment 2
2Sensing range
Check the application conditions: Adjust the sensing range and distance to the object or
background and the remission capability of the object according to the corresponding dia‐
gram [see table 3].
0
Sensing range
Distance in mm (inch)
2 650
1
2
3
Sensing range typ. max.
2
(0.08)
4
(0.16)
6
(0.24)
8
(0.31)
10
(0.39)
98
1
2320
98
98
1Sensing range on white, 90 % remission
2Sensing range on gray, 18 % remission
3Sensing range on black, 6 % remission
Figure 4: Sensing range 8 mm
0
Sensing range
2
1
2
3
Sensing range typ. max.
4
(0.16)
8
(0.31)
12
(0.47)
16
(0.63)
20
(0.79)
18
1
218
1815
1Sensing range in white, 90 % remission
2Sensing ranghe on gray, 18 % remission
3Sensingrange on black, 6 % remission
Distance in mm (inch)
15
15
Figure 5: Sensing range 15 mm
7 COMMISSIONING
88023328.18HX | SICK
Subject to change without notice
0
Sensing range
2 650
1
2
3
Sensing range typ. max.
8
(0.31)
16
(0.63)
24
(0.94)
32
(1.26)
40
(1.57)
3528
1
2320
3529
3530
1Sensing range in white, 90 % remission
2Sensing range on gray, 18 % remission
3Sensing range on black, 6 % remission
Distance in mm (inch)
Figure 6: Sensing range 30 mm
4 5 6
Figure 7: Description of the sensing range areas
Table 3: Sensing range areas
Sens‐
ing
range
/
object
color
-Xxx4x 6-Xxx1x 6-Xxx3x 6
40 ... 1 mm 0 ... 1 mm 0 ... 1 mm
5 / 11 ... 9 mm 1 ... 18 mm 1 ... 35 mm
5 / 22 ... 9 mm 2 ... 18 mm 2 ... 35 mm
5 / 32 ... 9 mm 2 ... 18 mm 2 ... 35 mm
Use see table 2, page 7 to check the function. If the switching output fails to behave in
accordance with the table, check the application conditions. See section Fault diagnosis.
3Sensing range setting
Sensor which it is not possible to set: The sensor is adjusted and ready for operation.
8 Troubleshooting
The Troubleshooting table indicates measures to be taken if the sensor stops working.
Table 4: Troubleshooting
LED indicator/fault pattern Cause Measures
Yellow LED does not light up
even though the light beam is
aligned to the object and the
object is within the set sensing
range
No voltage or voltage below
the limit values
Check the power supply,
check all electrical connec‐
tions (cables and plug connec‐
tions)
Voltage interruptions Ensure there is a stable power
supply without interruptions
TROUBLESHOOTING 8
8023328.18HX | SICK
Subject to change without notice 9
LED indicator/fault pattern Cause Measures
Sensor is faulty If the power supply is OK,
replace the sensor
Yellow LED lights up, no object
in the path of the beam
The sensing range distance is
too large
Reduce the sensing range,
see Figures 6-8 and table 3
Object is in the path of the
beam, yellow LED does not
light up
Distance between the sensor
and the object is too long or
sensing range is set too short
Increase the sensing range,
see Figures 6-8 and table 3
9 Disassembly and disposal
The sensor must be disposed of according to the applicable country-specific regula‐
tions. Efforts should be made during the disposal process to recycle the constituent
materials (particularly precious metals).
NOTE
Disposal of batteries, electric and electronic devices
•According to international directives, batteries, accumulators and electrical or
electronic devices must not be disposed of in general waste.
•The owner is obliged by law to return this devices at the end of their life to the
respective public collection points.
•
WEEE: This symbol on the product, its package or in this document, indi‐
cates that a product is subject to these regulations.
10 Maintenance
SICK sensors are maintenance-free.
We recommend doing the following regularly:
•Clean the external lens surfaces
•Check the screw connections and plug-in connections
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
9 DISASSEMBLY AND DISPOSAL
10 8023328.18HX | SICK
Subject to change without notice
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Sprachen:
Andere SICK Zubehör Handbücher
SICK
SICK GLS6 Bedienungsanleitung
SICK
SICK OD5000-C15 Series Bedienungsanleitung
SICK
SICK GTB6V Bedienungsanleitung
SICK
SICK RSB1 1 Series Bedienungsanleitung
SICK
SICK VISIC100SF Bedienungsanleitung
SICK
SICK W24-2 Bedienungsanleitung
SICK
SICK WLA16P Bedienungsanleitung
SICK
SICK PBS Hygienic Series Bedienungsanleitung
SICK
SICK SIM1012 Bedienungsanleitung
SICK
SICK WL12G-3P3572S12 Bedienungsanleitung
SICK
SICK GTE20 Bedienungsanleitung
SICK
SICK LFV 200 Bedienungsanleitung
SICK
SICK SIM1000 FXA Bedienungsanleitung
SICK
SICK GL6 V Series Bedienungsanleitung
SICK
SICK Z18 SimpleSense Bedienungsanleitung
SICK
SICK OLS20 Bedienungsanleitung
SICK
SICK PowerProx Mini WTT4SLC Bedienungsanleitung
SICK
SICK LMS4400 Bedienungsanleitung
SICK
SICK WTB4S-3 Bedienungsanleitung
SICK
SICK NAV210 Bedienungsanleitung
