Siemens MULTIMOBIL 5C Bedienungsanleitung

MULTIMOBIL 5C

English

Print No.: SPR2-125.811.01.02.02 Doc. Gen. Date: 10.05

Replaces: SPR2-125.811.01.01.02

The reproduction, transmission or

use of this document or its contents

is not permitted without express

written authority. Offenders will be

liable for damages. All rights,

including rights created by patent

grant or registration of a utility

model _or_design,_are_reserved.

Pre-Installation

Pre-installation Instructions

Multimobil 5C

Siemens Ltd. Med India Version 5.0 Page 1 of 11

Multimobil 5C

Med

Pre-installation

Version 5.0

Pre-installation Instructions

Multimobil 5C

Siemens Ltd. Med India Version 5.0 Page 2 of 11

INDEX

1PRE-INSTALLATION................................................................................................................... 3

1.1 TECHNICAL SPECIFICATIONS ....................................................................................................... 3

1.2 INFORMATION ON ROOM PLANNING.............................................................................................. 7

1.3 PACKAGING ................................................................................................................................7

1.4 UNLOADING ................................................................................................................................8

1.5 UNPACKING THE MM5C.............................................................................................................. 8

1.6 UNPACKING THE MONITOR TROLLEY ........................................................................................... 10

1.7 INSTALLATION OF THE MONITORS ............................................................................................. 11

Pre-installation Instructions

Multimobil 5C

Siemens Ltd. Med India Version 5.0 Page 3 of 11

1 Pre-installation

1.1 Technical Specifications

Sr.No Parameter Value

1. Mains Voltage 110V/190 -240V∼

2. Line frequency 50 / 60Hz

3. Line impedance 1.5 Ω(max) @ 190-240 V

0.36Ω(max) @ 110V

4. Length of power cable 5 m

5. Power Output –

Radiography

Nominal Electric power at

100kV and 100mSec.

2.5 kW (100 kV, 25 mA) @ 190-240V

1.6KW (100 kV, 16 mA) @110V

6. Wave Shape Multipulse DC - Ripple 5kV max

7. KVp Range 40 – 100kV in 20 steps

8. KV Accuracy ≤±5 %

9. mA-range 13 – 63 mA @ 190-240V input

10 – 40 mA @ 110V input

0.32 – 200mAs at 40kV

0.32 – 160mAs at 42 - 50kV

0.32 – 125mAs at 52 - 63kV

0.32 – 100mAs at 66 - 77kV

10. mAs Range

0.32 – 80 mAs at 81 - 100kV

≤10 % + 0.2 mAsfor mAs ≤20 mAs

11. mAs Accuracy

≤5 % + 0.2 mAs for mAs > 20 mAs

12. Exposure Time 20mSec - 5 Sec in 24 steps @190-

240V

20mSec – 8 Sec in 26 steps @ 110V

For details of kV, mA and exposure

time combinations as per EN 60601-2-

7 refer to exposure chart on page 6-14.

13. Fluoroscopy voltage 40-110 kV

14. Fluoroscopy Modes ADR(Automatic dosage regulation):

Anti-isowatt & Contrast.

15. Fluroscopy mA range Anti-isowatt 0.5 to 5 mA

Contrast 0.5 to 7mA

16. Fluroscopy Power 550W continous

17. Timer Fluoroscopy time display with timer

Pre-installation Instructions

Multimobil 5C

Siemens Ltd. Med India Version 5.0 Page 4 of 11

Sr.No Parameter Value

reset and 5 minute buzzer indication

18. Thermal Protection Auto cutoff of fluoroscopy and

radiography in case of tube head

temperature exceeding 60°(+5°)

Celsius

19. Automatic termination

Buzzer alarm is set and fluoroscopy

terminates after 10 minutes of

Continuous uninterrupted fluoroscopy.

20. Power Input:

Continous

Instantaneous

1.5kVA

3.5kVA

21. Mains Isolation

External: done by the

user

Power supply cord shall be plugged

where both poles (L & N) are isolated

simultaneously.

22. Type and degree of

protection against electric

shock (EN 60601 – 1)

Class – I, Type B equipment

23. X - ray Tube Stationary Anode DF-151R

24. Focal Spot – nominal

value

0.5 for Fluoroscopy

1.5 for radiography

25. Inherent tube Filtration 0.8 mm Al at 50kV

26. Nominal kV 110 kV

27. Target Angle 16°

28. Collimator Motorised, multileaf Iris Collimator

29. Total filtration 5.3 mm Al at 100kV

30. Exposure release Switch.

Flouroscopy switch.

Hand held - 1 Step.

Foot switch – 1 step and / or

Hand held switch – 1 step.

31. Exposure Rate for

Radiography

Pulse to pause ratio 1:30; corresponds

to a cool down period of 4 minutes at

maximum output.

32. Max. X-ray coverage 430X430mm at SID 909 mm

33. Mode of Operation Continuous operation

34. Focus-II distance 860mm for 9’’ system

900mm for 6’’ system

35. Max. cassette size at 900

cm SID

10’’X12’’

Pre-installation Instructions

Multimobil 5C

Siemens Ltd. Med India Version 5.0 Page 5 of 11

Sr.No Parameter Value

36. Grid Circular grid placed at the input of the

II tube , 40 Ip/cm, 8:1

37. Image Intensifier 9’’ / 6’’

38. Image Intensifier tube

resolution

Nominal 52lp/cm and zoom 68 Ip/cm

for 9’‘ system

Nominal 66 lp/cm and zoom 77 Ip/cm

39. Nominal entrance field 230mm for 9’’ system

150mm for 6’’ system

40. II output image size

diameter

25±0.5mm for 9’’ system

20±0.5mm for 6’’ system

41. Zoom (field size) 230mm/160mm for 9’’ system

150 mm/100 mm for 6’‘ system

42. TV camera

Input Voltage

AC100∼220V±10%

43. Pick Up device

Pick UP area

CCD

6.4X4.8mm

44. Effective Pixels 752(H)X582(V)(CCIR)

768(H)X494(V)(EIA)

45. TV System 625lines/50Hz(CCIR)

525lines/60Hz(EIA)

46. No. of monitors 2 monitors one each for Live/Last

Image Hold(LIH) and stored memory

display

47. Monitor size 17’’monochrome with 9’’ system and

15’’ monochrome with 6’’ system

48. Monitor screen High brightness, high resolution with

independent brightness and contrast

control

49. TV standard CCIR 625 lines at 50 Hz

50. Aspect ratio 4:3

51. Image rotation Endless clockwise and anti-clockwise

with complete 400°rotation

52. Recursive filter Steps of OFF,2,4,8,16 to minimize

dynamic blur

53. Image reversal Left/right and top/bottom

54. II Chain Resolution Nominal 1.2 lp/cm Zoom 1.6 lp/cm for

9’‘ system

Nominal 1.4 lp/cm Zoom 2.0 lp/cm for

6’‘ system

Pre-installation Instructions

Multimobil 5C

Siemens Ltd. Med India Version 5.0 Page 6 of 11

Sr.No Parameter Value

55. C-arm orbital movement 125°(+90°to -35°)

56. Angulation ±190°

57. Horizontal travel 200mm

58. Swivel range ±12.5°

59. Vertical travel 400 mm

60. Mobility Directional lock on rear wheels

enabling excellent maneuverability

61. Max. floor incline for

transport

5°

62. Mechanical Dimensions

(lxbxh)

2000 x 800 x1720 mm (min)

2070x1050 x2120 mm (max)

Weight

Without packing 280kg

63.

With packing 680kg

Environmental conditions

Transport and Storage

Temp range.

Relative Humidity range

Atmospheric pressure

-15°C to 45°C

Upto 95% (No Condensation)

76 kPa to106 kPa

64.

Operating Temperature

Relative Humidity range

Atmospheric pressure

10°C to 40°C

Upto 85% Max non condensing

76 kPa to106 kPa

65. Conformance to

Standards

EN 60601-1:1990

EN 60601-2-7:1998

EN 60601-1-3:1994

EN 60601-1-2:2001

Compliance to AERB Type Approval

Certification

Compliance to BIS test certification.

Pre-installation Instructions

Multimobil 5C

Siemens Ltd. Med India Version 5.0 Page 7 of 11

1.2 Information on Room Planning

No specific conditions required. Following are the recommended room conditions for

proper functioning of the unit.

Ambient Temperature (Room temperature): + 40 °C Max

Air Humidity: up to 75%, Non-condensing.

During Transport and storage of the product the ambient temperature should not be

below -15°C or rise above +45°C. Storage is permissible in rooms with minimum

amount of dust and Humidity in range of 30% to 95% RH provided no condensation

occurs.

1.3 Packaging

The Multimobil 5C unit is delivered in two wooden boxes.

One box consists of the Monitor trolley. This is a wooden box with the trolley mounted

on the wooden base and is fixed using clamping brackets.

The second box contains the MM5C unit along with monitors and accessories .The C-

arm unit is clamped using brackets on the wooden base. The two monitors are packed

in the corrugated box and placed on the wooden platform.

One box consists of standard accessories i.e. sterile cloth, Clips and user manual.

MM5C with

monitors and

accessories

Pre-installation Instructions

Multimobil 5C

Siemens Ltd. Med India Version 5.0 Page 8 of 11

Monitor trolley

for MM5C

1.4 Unloading

The unloading of the unit from the truck can be carried out using any of the following

ways depending on the site conditions:

1) Using a forklift.

2) Using an overhead travelling crane.

3) Using a chain pulley block and tripod.

4) Using conventional ways i.e. using wedges, wooden planks, pipes or rods and

labour etc.

Note: 1. All boxes are provided with transport base.

2. Do not roll the boxes.

3. Do not drop the boxes from a height of more than 20cms.

4. Observe the stickers (This side up) and (handle with care) on the

Packing for proper handling.

Once the unit is removed from the transport, place it on the ground on the base.

1.5 Unpacking the MM5C

The complete system must be inspected for physical damage and / or material

short-fall and factory must be informed accordingly.

The Multimobil 5C consists of fragile components like camera, Image intensifier, X-ray

Tube etc. Sufficient care must be taken while unloading / unpacking the unit. Refer the

unpacking instructions provided on the packing.

Pre-installation Instructions

Multimobil 5C

Siemens Ltd. Med India Version 5.0 Page 9 of 11

Observe the following steps:

1) Remove the restraining strips by cutting it. Use a cutting plier for this purpose.

2) Start removing the wooden planks. For this purpose the service engineer should use

a claw hammer or nail pulling plier and preferably a crow bar.

3) First of all remove the top planks. Upon opening this plank you will be able to see the

unit inside. Ensure that the unit has not received any transit damages.

4) Now, remove the front and rear wall of the box one by one. The front wall is provided

with a ramp. Hence, place this plank carefully for pushing the unit out of the platform.

5) Now you will see three wooden blocks fixed across the unit for supporting the wall

and also to support the image intensifier and single tank. These are supporting

beams.

6) Loosen these blocks from one side and remove them gently. Now, remove the side

walls.

7) Care should be taken to see that the wooden planks or the nails do not damage the

unit.

8) Now, you can easily remove the ESD bags.

9) After removing the ESD bags, remove the monitor boxes and accessories and take

them to the OT.

10)Remove the packing strips and thermocol packing from the control, II and single

tank. Also, remove the wooden lever fixed at the base by cutting the strap.

11)Next step is to remove the clamping brackets. First of all, remove the bracket used

for clamping the single tank and Image intensifier. Secondly, remove the bracket

used to clamp C-arm. Third, remove the brackets on the rear wheels. Next remove

the brackets used to clamp the base.

12)Now ensure that the rear wheels are in locked condition. Also the C-Arm should be

in locked condition.

13)Remove the bolts of the clamping brackets at the rear side on which the housing is

resting. Now, using the lever, gently lift the base along the bracket so that the rubber

block can be removed. Once the rubber blocks are removed, remove the clamping

bracket.

14)Now, remove the two brackets on the front end of the base. Lift from sides using

wooden lever. Remove the rubber buffer and remove the bracket.

15)Now the unit will be resting on the wooden platform. Release the brakes and push

the unit down to the ground through the ramp.

Andere Handbücher für MULTIMOBIL 5C

Inhaltsverzeichnis

Andere Siemens Medizinische Geräte Handbücher

Siemens

Siemens MAMMOMAT 1000 Nova Benutzerhandbuch

Siemens

Siemens ACUSON X300 Bedienungsanleitung

Siemens

Siemens Drager medical Apollo SW 4.n Betriebsanleitung

Siemens

Siemens MOBILETT Plus Betriebsanleitung

Siemens

Siemens MULTIMOBIL 10 Bedienungsanleitung

Siemens

Siemens ACUSON X150 Bedienungs- und Wartungsanleitung

Siemens

Siemens ARCADIS Avantic Bedienungs- und Wartungsanleitung

Siemens

Siemens MODULARIS Uro Plus Montageanleitung

Siemens

Siemens MAMMOMAT 3000 Einrichtungshandbuch

Siemens

Siemens Drager medical Carina Bedienungsanleitung

Siemens

Siemens ACUSON NX3 series Bedienungsanleitung

Siemens

Siemens Uroskop ACCESS Bedienungsanleitung

Siemens

Siemens POLYMOBIL Plus Bedienungs- und Wartungsanleitung

Siemens

Siemens ARCADIS Orbic Installationshandbuch

Siemens

Siemens Hematek 3000 System Bedienungsanleitung

Siemens

Siemens MAMMOMAT 1000 Nova Technische Daten

Siemens

Siemens Drager Medical Fabius GS Montageanleitung

Siemens

Siemens Healthineers UniPOC RAPIDPoint 500 Bedienungsanleitung

Siemens

Siemens ARCADIS Avantic Installationshandbuch

Siemens

Siemens MTCO 1324 Bedienungsanleitung

Siemens

Siemens MOBILETT XP Bedienungs- und Wartungsanleitung

Siemens

Siemens MAMMOMAT Novation DR Installationshandbuch

Siemens

Siemens MAMMOMAT Novation DR Gebrauchs- und Pflegehandbuch

Siemens

Siemens MOBILETT Plus HP Gebrauchsanweisung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung