Siemens ARCADIS Orbic Installationshandbuch

The reproduction, transmission or use

of this document or its contents is not

permitted without express written

authority. Offenders will be liable for

damages. All rights, including rights

created by patent grant or registration

of a utility model or design, are

reserved.

Print No.:

Würthwein

ARCADIS Orbic

System

Installation and Startup

2005

SPR2-320.814.03.02.02

Replaces: SPR2-320.814.03.01.02

English

Doc. Gen. Date: 06.05

3D Navigation

08080009

2 Revision / Disclaimer

ARCADIS Orbic SPR2-320.814.03.02.02 Siemens AG

06.05 CS SD 24

Page 2 of 16 Medical Solutions

1Revision / Disclaimer

Document revision level

The document corresponds to the version/revision level effective at the time of system

delivery. Revisions to hardcopy documentation are not automatically distributed.

Please contact your local Siemens office to order current revision levels.

Disclaimer

The installation and service of equipment described herein is to be performed by qualified

personnel who are employed by Siemens or one of its affiliates or who are otherwise

authorized by Siemens or one of its affiliates to provide such services.

Assemblers and other persons who are not employed by or otherwise directly affiliated

with or authorized by Siemens or one of its affiliates are directed to contact one of the

local offices of Siemens or one of its affiliates before attempting installation or service pro-

cedures.

Siemens AG SPR2-320.814.03.02.02 ARCADIS Orbic

06.05 CS SD 24

Table of Contents 3

Page 3 of 16

Medical Solutions

1- 0Table of Contents

1 _______ Prerequisites ___________________________________________________ 4

3D navigation with the ARCADIS Orbic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

General requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Required documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

System requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Required parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Required license key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Functional check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2 _______ Installation and settings __________________________________________ 7

Work sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installing the TCP/IP cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Attaching the HW interface to the image intensifier . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Attaching the identification label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Configuring the network node . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Final work steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3 _______ Changes to the previous versio ___________________________________ 15

4 Prerequisites

ARCADIS Orbic SPR2-320.814.03.02.02 Siemens AG

06.05 CS SD 24

Page 4 of 16 Medical Solutions

1Prerequisites

3D navigation with the ARCADIS Orbic 0

Fig. 1: Navigation systems

Fig. 2: 3D_marker ring

The 3D navigation kit is a universal HW and SW interface which serves navigation sys-

tems from different navigation companies (Fig.1/p.4).

The navigation system itself is supplied by a navigation company.

The supplied grid holder on the image intensifier is usually the interface to the “removable

marker ring”. An engineer from the navigation company is responsible for attaching the

active or passive marker ring (Fig.2/p.4)to the I.I. of the Is C 3D.

Siemens AG SPR2-320.814.03.02.02 ARCADIS Orbic

06.05 CS SD 24

Prerequisites 5

Page 5 of 16

Medical Solutions

A Siemens engineer is responsible for attaching the grid holder to the image intensifier,

testing and loading the SW, calibration without the marker ring on the I.I., as well as con-

figuration.

An additional calibration must be performed with the navigation system installed (marker

ring on the I. I.). Therefore, an engineer from the navigation company must be participate

in the calibration.

Two engineers use a test body to check the interaction of the two systems and the overall

accuracy.

The test body always remains with the customer.

The overlap time of the two engineers is approx. 2 hours.

The navigation system is handed over by the navigation company.

General requirement 0

Support for startup from the navigation company should be provided on site.

Required documents 0

System requirement 0

ARCADIS system software VB11 or higher.

Required parts 0

TCP/IP type cross-over cable for a direct connection to the navigation system (not

included in the shipment).

TCP/IP cable for a connection to the navigation system via the clinical network (not

included in the shipment).

3D navigation kit: 80 81 452

Required license key 0

System configuration SPR2-320.843.02.01.02

Image quality test SPR2-320.820.02.01.02

3D navigation license key Part No.: 80 81 528

3D license key Part No.: 80 81 502

6 Prerequisites

ARCADIS Orbic SPR2-320.814.03.02.02 Siemens AG

06.05 CS SD 24

Page 6 of 16 Medical Solutions

Tools 0

Tool kit

Safety information 0

WARNING Risk of physical injury or death and property damage!

Non-compliance can lead to death, physical injury or property

damage.

Strictly follow:

¹The product-specific safety information in these instruc-

tions

¹The general safety information in the instructions

TD00-000.860.01...

¹The general safety information according to ARTD part 2.

Functional check 0

•Prior to the installation of the 3D navigation kit, check that the system is functioning

properly.

•Visually inspect the 3D navigation kit and the calibration phantom with navigation inter-

face to ensure they are in good condition.

Siemens AG SPR2-320.814.03.02.02 ARCADIS Orbic

06.05 CS SD 24

Installation and settings 7

Page 7 of 16

Medical Solutions

2Installa tion and setting s

Work sequence 0

Installing the TCP/IP cable 0

•Plug the TCP/IP cross-over cable into the monitor trolley and into the 3D navigation

system (see figure below).

NOTE If the ARCADIS system is connected to the navigation system via

the clinical network, there can be problems if the load on the clin-

ical network is heavy.

Fig. 3: Plug

Attaching the HW interface to the image intensifier 0

Fig. 4: I.I._01

8 Installation and settings

ARCADIS Orbic SPR2-320.814.03.02.02 Siemens AG

06.05 CS SD 24

Page 8 of 16 Medical Solutions

Fig. 5: I.I._02

Fig. 6: I.I._03

Siemens AG SPR2-320.814.03.02.02 ARCADIS Orbic

06.05 CS SD 24

Installation and settings 9

Page 9 of 16

Medical Solutions

Fig. 7: I. I. _ new

•Remove the screws of the grid holder (Fig.4/p.7).

•Detach the microswitch, pinch it off and insulate the cable with insulating tape

(Fig.5/p.8).

•Detach the grid from the grid holder. The gaskets are no longer needed.

•Apply a little silicone 20 48 981 all around the fitting of the grid holder 75 51 703 and

press down the grid, making sure it is correctly positioned in the grid holder.

NOTICE Ensure the grid is properly oriented in the grid holder and the

C-arm assembly is correctly oriented.

¹See (Fig.7/p.9)

•Wait for the silicone to harden (approx. 30 min.).

•Attach the grid holder to the I.I. and secure it with screws 11 22 571 and contact wash-

ers 34 16 666.

10 Installation and settings

ARCADIS Orbic SPR2-320.814.03.02.02 Siemens AG

06.05 CS SD 24

Page 10 of 16 Medical Solutions

Attaching the identification label 0

Fig. 8: Label

•Attach the identification label 75 51 828 to the unit as shown in the illustration.

Configuring the network node 0

•Switch on the system.

•Click <Options> - <Service> - <Local Service>.

•Enter the password and click <ok>.

•Click <Configuration>.

•“Attached to Network” and “Dicom Networking” must be selected.

•Click <Next>.

Andere Handbücher für ARCADIS Orbic

Inhaltsverzeichnis

Andere Siemens Medizinische Geräte Handbücher

Siemens

Siemens SOMATOM Scope Bedienungsanleitung

Siemens

Siemens acuson Sequoia Installationsanleitung

Siemens

Siemens MAMMOMAT Inspiration Gebrauchs- und Wartungshandbuch

Siemens

Siemens Drager medical Apollo SW 4.n Betriebsanleitung

Siemens

Siemens Drager Medical Fabius GS Montageanleitung

Siemens

Siemens SIREMOBIL Bedienungsanleitung

Siemens

Siemens LITHOSTAR Multiline Technische Daten

Siemens

Siemens MAMMOMAT Novation DR Bedienungsanleitung

Siemens

Siemens MOBILETT XP Bedienungs- und Wartungsanleitung

Siemens

Siemens MAMMOMAT Novation DR Bedienungsanleitung

Siemens

Siemens ARCADIS Varic Installationshandbuch

Siemens

Siemens ARCADIS Avantic Installationshandbuch

Siemens

Siemens SONOLINE G50 Bedienungsanleitung

Siemens

Siemens Healthineers MAGNETOM Sempra Bedienungsanleitung

Siemens

Siemens Drager medical Carina Bedienungsanleitung

Siemens

Siemens ACUSON X150 Bedienungs- und Wartungsanleitung

Siemens

Siemens ACUSON NX3 series Bedienungsanleitung

Siemens

Siemens Uroskop ACCESS Bedienungsanleitung

Siemens

Siemens ACUSON Freestyle Bedienungsanleitung

Siemens

Siemens ARCOSKOP Bedienungs- und Wartungsanleitung

Siemens

Siemens ARCADIS Varic Bedienungsanleitung

Siemens

Siemens SIREMOBIL Iso-C Bedienungsanleitung

Siemens

Siemens SIREMOBIL Iso-C Gebrauchsanweisung

Siemens

Siemens Uroskop ACCESS Installationshandbuch

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung