Siemens Hematek 3000 System Bedienungsanleitung

Hematek®3000 System

Instruction Manual

– Instructions for Use –

11209634

Manual Version: 1.3

Date of Issue: 2015-01

We reserve the right to make changes in the course of technical development without previous notice.

Emil-von-Behring-Str. 76

35041 Marburg

Germany

Neither this manual nor any parts of it may be duplicated or transmitted in any way without the written approval

of Siemens Healthcare Diagnostics Products GmbH.

Updating

Trademarks Hematek is a trademark of Siemens Healthcare Diagnostics.

Disclaimer Siemens Healthcare Diagnostics has validated the provided instructions,

reagents, instrument, software and customizable features for this system to

optimize product performance and meet product specifications. User

defined modifications are not supported by Siemens as they may affect

performance of the system and test results.

Version Date Changes

1.0 2013-08 First version

1.1 2013-09 Update

1.2 2013-11 Update

1.3 2015-01 Update

Siemens Healthcare Diagnostics Products GmbH

Emil-von-Behring-Str. 76

35041 Marburg

Germany

www.siemens.com/diagnostics

Chapter overview

Hematek®3000 System – Instruction Manual – Version 1.3

Chapter overview

1 Introduction

2 Safe handling

3 Life cycle

4 Description

5 Operating

6 Cleaning

7 Performing maintenance

8 Troubleshooting

9 Appendix

Addendum to the instruction manual

Hematek®3000 System – Instruction Manual – Version 1.3

Chapter overview

Table of contents

Hematek®3000 System – Instruction Manual – Version 1.3 1TOC

Table of contents

1 Introduction 1-1

1.1 About this manual 1-1

1.2 Orientation tips 1-1

1.3 Service 1-2

1.4 Warranty 1-2

1.5 Ordering information 1-2

2 Safe handling 2-1

2.1 Intended use 2-1

2.2 General safety information 2-1

2.2.1 Operator qualification 2-1

2.2.2 Electrical safety 2-2

2.2.3 Mechanical safety 2-2

2.2.4 Operational safety 2-3

2.2.5 Safe handling of glass slides and consumables 2-3

2.3 Safety messages 2-5

2.3.1 Signal words in safety messages 2-5

2.3.2 Structure of safety messages 2-5

2.4 Symbols on the slide stainer and consumables 2-6

2.5 Statutory requirements 2-7

2.6 Obligations of the system owner 2-8

3 Life cycle 3-1

3.1 Delivery 3-1

3.1.1 Unpacking and checking the delivery 3-1

3.1.2 Scope of delivery 3-2

3.2 Installation 3-2

Hematek®3000 System – Instruction Manual – Version 1.32TOC

Table of contents

3.3 Non-operation 3-6

3.4 De-installation 3-8

3.5 Transport 3-8

3.6 Disposal 3-10

4 Description 4-1

4.1 Slide stainer 4-1

4.1.1 Fluid delivery components 4-3

4.1.2 Slide transport components 4-7

4.1.3 Electrical components 4-9

4.1.4 Leveling components 4-12

4.1.5 Lid 4-12

4.2 Consumables and spare parts 4-12

4.2.1 Hematek Stain Pak - Modified Wright’s Stain 4-12

4.2.2 Hematek Stain Pak - Wright-Giemsa Stain 4-13

4.2.3 Hematek Cannula Set 4-13

4.2.4 Hematek Pump Tube Set 4-14

4.2.5 Hematek Underplaten Tubing Set 4-14

4.2.6 Glass slides 4-15

4.2.7 Line fuses 4-15

4.2.8 Knurled thumb screw 4-15

5 Operating 5-1

5.1 Starting the system 5-1

5.2 Priming the pump tubing 5-1

5.3 Preparing priming slides 5-2

5.4 Loading smeared glass slides 5-2

5.5 Switching off the system 5-4

6 Cleaning 6-1

6.1 Periodic cleaning 6-2

Table of contents

Hematek®3000 System – Instruction Manual – Version 1.3 3TOC

6.2 Cleaning the exterior surfaces 6-2

6.3 Cleaning the stain tube and cannula 6-2

6.4 Cleaning the platen 6-4

6.5 Cleaning the waste tank 6-5

6.6 Cleaning the drain troughs and the rear guide rail 6-6

7 Performing maintenance 7-1

7.1 Periodic maintenance 7-1

7.2 Installing the Hematek Stain Pak 7-1

7.3 Replacing the pump tubing 7-3

7.3.1 Removing the pump tubing 7-3

7.3.2 Installing the pump tubing 7-6

7.4 Replacing the underplaten tubing 7-8

7.4.1 Removing the underplaten tubing 7-8

7.4.2 Installing the underplaten tubing 7-13

8 Troubleshooting 8-1

8.1 Troubleshooting chart 8-1

8.2 Leveling the system 8-4

8.3 Checking the adjustment of the sensing switch fingers 8-5

8.4 Adjusting the sensing switch fingers 8-6

8.5 Adjusting the pump volumes 8-8

8.5.1 Checking the staining process 8-8

8.5.2 Correcting the pump volumes 8-9

8.5.3 Verifying the pump volumes 8-11

8.5.3.1 Recorded volumes fall within specified ranges 8-14

8.5.3.2 Recorded volumes do not fall within specified ranges 8-15

8.6 Replacing the line fuses 8-15

Hematek®3000 System – Instruction Manual – Version 1.34TOC

Table of contents

9 Appendix 9-1

9.1 Principle of operation 9-1

9.2 Staining process 9-2

9.2.1 Example for the calculation of the stain-to-buffer ratio 9-2

9.3 Technical specifications 9-3

Index IX-1

Addendum to the instruction manual 1

1 Introduction

Hematek®3000 System – Instruction Manual – Version 1.3 11

1Introduction

This chapter gives orientation tips for using this manual and information

about service and warranty.

1.1 About this manual

This manual describes the use of the Hematek 3000 System in clinical

laboratories.

1.2 Orientation tips

Bullets Bullets indicate a list.

Example:

The box contains:

•Monitor

•Keyboard

•Manual

Numbers Numbers indicate a procedure.

Example:

1. Open the box.

2. Check the content.

3. Read the manual.

The numbering is also used if the procedure includes only one step.

Arrow An arrow indicates one or more results of an action.

Example:

1. Select Print.



The dialog Print opens.

Bold type Bold type is used to put a special emphasis on something.

Example:

This process must never be canceled.

Hematek®3000 System – Instruction Manual – Version 1.321

1 Introduction

Gray note Gray notes indicate important background information.

Example:

1.3 Service

Siemens and its representatives are available to repair the system during

customary local office hours. Should you require service at any other time,

contact the Siemens service or your local Siemens representative. In the

following, Siemens service refers to both, the Siemens service or any local

representative authorized by Siemens. You will receive information about

how to reach the Siemens service when the system is installed, or visit

www.siemens.com/diagnostics to find contact information.

The scope of agreed service is included in your service contract.

1.4 Warranty

Siemens and its representatives guarantee that the system shows no

defects during operation if installed and operated according to this manual.

For more information about warranty, contact the Siemens service.

The warranty is not valid for damage that occurs as a consequence of non-

observance of this manual.

Repairs and servicing must only be carried out by persons authorized by

Siemens.

Only perform maintenance as described in this manual. Improper

interventions on the system void the warranty and can result in service

charges.

Only use the system as intended. If the system is not used as intended,

Siemens disclaims all liability for damage to the system.

1.5 Ordering information

Use only original Siemens consumables, accessories and spare parts.

Order these only from Siemens. For ordering information, see the Siemens

product catalog or contact the Siemens service.

Note: Once the shift change has been activated, it cannot be

interrupted.

Inhaltsverzeichnis

Andere Siemens Medizinische Geräte Handbücher

Siemens

Siemens Rapidlab 1200 Handbuch

Siemens

Siemens SIREMOBIL Compact Gebrauchsanweisung

Siemens

Siemens ARCADIS Varic Bedienungs- und Wartungsanleitung

Siemens

Siemens MOBILETT Plus HP Betriebsanleitung

Siemens

Siemens Uroskop ACCESS Bedienungsanleitung

Siemens

Siemens MTCO 1324 Bedienungsanleitung

Siemens

Siemens ADVIA 2400 Handbuch

Siemens

Siemens 25 Bedienungsanleitung

Siemens

Siemens ARCADIS Orbic Installationshandbuch

Siemens

Siemens MOBILETT Plus Bedienungsanleitung

Siemens

Siemens SOMATOM Emotion Bedienungsanleitung

Siemens

Siemens PELTON & CRANE Light Fantastic II Bedienungsanleitung

Siemens

Siemens MAMMOMAT 1000 Nova Benutzerhandbuch

Siemens

Siemens ARCADIS Varic Bedienungsanleitung

Siemens

Siemens MAMMOMAT Inspiration Gebrauchs- und Wartungshandbuch

Siemens

Siemens ARCADIS Orbic Installationshandbuch

Siemens

Siemens SIRECUST 1280 Bedienungsanleitung

Siemens

Siemens ARCADIS Varic Installationshandbuch

Siemens

Siemens MAGNETOM Skyra fit Bedienungsanleitung

Siemens

Siemens MAMMOMAT Nova Opdima 1000 Betriebsanleitung

Siemens

Siemens POWERMOBIL Gebrauchsanweisung

Siemens

Siemens SIREMOBIL Iso-C Gebrauchsanweisung

Siemens

Siemens MAMMOMAT 3000 Bedienungsanleitung

Siemens

Siemens SOMATOM Spirit Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung