SIGMA TEK SRO 021 Bedienungsanleitung

SRO 021

S-DIAS Safety

Relay Output Module

Date of creation: 18.12.2013

Version date: 02.12.2019

Article number: 20-893-021-E

Publisher: SIGMATEK GmbH & Co KG

A-5112 Lamprechtshausen

Tel.: +43/6274/4321

Fax: +43/6274/4321-18

Email: [email protected]

WWW.SIGMATEK-AUTOMATION.COM

SIGMATEK GmbH & Co KG

Translation from German

distributed in any form (print, photocopy, microfilm or in any other process) without the express permission.

We reserve the right to make changes in the content without notice. The SIGMATEK GmbH & Co KG is not

responsible for technical or printing errors in the handbook and assumes no responsibility for damages that occur

through use of this handbook.

S-DIAS SAFETY RELAY OUTPUT MODULE SRO 021

02.12.2019 Page 1

S-DIAS Safety Relay Output Module SRO 021

The S-DIAS Safety SRO 021 relay output module has the safety

integrity level SIL3 or SIL CL 3 (EN / IEC 62061) or

Performancelevel e (PL e) (EN ISO 13849-1/-2). The SRO 021

has:

•2 Safe outputs (EN 61131-2; EN/IEC 62061 und EN ISO

13849-1/-2)

The safe outputs are used for the safety-oriented output of two

actuator signals to, for example, control relays, valves, etc.

The safety-related SRO 021 is ideal for use in systems with

optional modules and interface variables according to Safety

System Handbook, see homepage

To use the SRO 021 in an application, at least one Safety CPU

module that regulates the synchronized communication with the

safety modules using safe bus telegrams is also required. This also

includes

•processing the safe application and

•the distribution of configuration data to remote Safety

modules

Using the search function with the keyword “Safety System Handbook”

SRO 021 S-DIAS SAFETY RELAY OUTPUT MODULE 
 
Page 2 02.12.2019 
Contents 
1Basic Safety Guidelines......................................................... 4 
1.1 General Information on Safety ....................................................4 
1.2 Further Safety Guidelines............................................................5 
1.3 General Requirements .................................................................6 
2Conformity with EU Guidelines ............................................10 
2.1 Functional Safety Standards.....................................................10 
2.2 EU Conformity Declaration........................................................10 
2.3 Safety-Relevant Parameters......................................................11 
2.4 Compatibility...............................................................................11 
3Technical Data .......................................................................12 
3.1 Relay Output Specifications......................................................12 
3.2 Lifespan of the Relay Output Module depending on the 
Number of Switching Cycles Per Year .....................................14 
3.3 Relay Circuit................................................................................15 
3.4 Electrical Requirements.............................................................15 
3.5 Miscellaneous .............................................................................17 
3.6 Environmental Conditions.........................................................17 
4Mechanical Dimensions........................................................18 
5Connector Layout..................................................................19 
5.1 Status LEDs.................................................................................20 
5.2 Applicable Connectors...............................................................20 

 S-DIAS SAFETY RELAY OUTPUT MODULE SRO 021 
 
02.12.2019 Page 3 
5.3 Label Field ...................................................................................21 
6Wiring.....................................................................................22
6.1 Wiring Example...........................................................................22 
6.2 Note..............................................................................................23 
7Mounting................................................................................24 
8Supported Cycle Times ........................................................26
8.1 Cycle Times below 1 ms (in µs).................................................26 
8.2 Cycle Times equal to or higher than 1 ms (in ms)...................26 
9Disposal .................................................................................26
 

SRO 021 S-DIAS SAFETY RELAY OUTPUT MODULE

Page 4 02.12.2019

1 Basic Safety Guidelines

1.1 General Information on Safety

If the safety guidelines are not followed, dangers to personnel can arise that could lead to

serious injury or in worst cases, death. In less serious cases, systems and equipment can

be damaged.

The following symbols identify the individual risks as well as the degree of seriousness;

their respective meanings are briefly explained. You should therefore familiarize yourself

with the safety symbols and their meanings to prevent dangers and risks.

DANGER!

Identifies an immediate danger with high risk, which

can lead to immediate death or serious injury if not

avoided.

Indique un danger direct à haut risque d’un décès

immédiat ou des blessures graves si les consignes de

sécurité ne sont pas respectées.

WARNING

Identifies a possible danger with a mid-level risk,

which can lead to death or (serious) injury if not

avoided.

Indique un danger possible d’un risque moyen de

décès ou de (graves) blessures si les consignes de

sécurité ne sont pas respectées.

CAUTION!

Identifies a low risk danger, which can lead to injury or

property damage if not avoided.

Indique un danger avec un niveau de risque faible des

blessures légères ou des dommages matériels si les

consignes de sécurité ne sont pas respectées.

S-DIAS SAFETY RELAY OUTPUT MODULE SRO 021

02.12.2019 Page 5

1.2 Further Safety Guidelines

Warning, dangerous electrical voltage

Avertissement d’une tension électrique dangereuse

Hot surface warning

Avertissement d’une surface chaude

Danger for ESD-sensitive components

Les signes de danger pour les composants sensibles

aux décharges électrostatiques

This symbol identifies important or additional

information regarding the operation of the safety

modules.

Ce symbole indique des informations importantes ou

supplémentaires concernant le fonctionnement des

modules de sécurité particuliers.

SRO 021 S-DIAS SAFETY RELAY OUTPUT MODULE

Page 6 02.12.2019

1.3 General Requirements

Technical

Documentation

This technical documentation is a component of this product.

•this document must be accessible in the vicinity of the

machine, since it contains important instructions.

•the technical documentation should be included in the

sale, rental or transfer of the product.

Documentation

technique

Cette documentation technique fait partie intégrale du produit.

•Gardez la toujours à portée de main et à la proximité

de la machine, car elle contient des informations

importantes.

•Distribuez la documentation technique aux secteurs de

la vente et/ou de la location du produit.

Acceptance of the

Safety Guidelines

Before handling the product belonging to this documentation,

the operating instructions and safety guidelines must be read.

SIGMATEK GmbH & Co KG accepts no liability for damages

resulting from non-compliance with the safety guidelines or the

relevant regulations.

Acceptance or the safety guidelines and the explanations in this

document, as well as the Safety System handbook are a basic

requirement for proper use. Therefore, read this operating

manual thoroughly and familiarize yourself with each of them.

More information on standards and regulations etc. can be

found in the system handbook.

Prendre connaissance

de consignes de

sécurité

Avant toute manipulation on doit impérativement prendre

connaissance de consignes de sécurité et du mode d’emploi.

SIGMATEK GmbH & Co KG n'assume aucune responsabilité

pour les dommages causés par le non-respect des consignes

de sécurité ou du mode d’emploi respectif.

La connaissance de consignes de sécurité et le contenu de

cette documentation ainsi que le mode d’emploi du système de

sécurité constitue une condition préalable à l'utilisation prévue.

Lisez ce mode d’emploi et assurez-vous de le comprendre

jusqu’aux détails.

Pour plus d'informations sur les normes et les lignes directrices,

etc., reportez-vous au mode d’emploi.

S-DIAS SAFETY RELAY OUTPUT MODULE SRO 021

02.12.2019 Page 7

Qualified Personnel

Installation, assembly, programming and initial start-up,

operation, maintenance and decommissioning of control and

automation technology products in general, as well as safety-

related products especially, can only be performed by qualified

personnel.

Qualified personnel in this context are people, who have

completed training or have trained under supervision of

qualified personnel and have been authorized to operate and

maintain safety-related equipment, systems and facilities in

compliance with the strict guidelines and standards of safety

technology.

Personnel qualifié

Installation, montage, programmation, mise en service,

l'exploitation, l'entretien et mise hors service de produits de

commande et d'automatisation en général, et de produits liés à

la sécurité, en particulier, ne peut être effectuée que par le

personnel qualifié.

On entend sous terme personnel qualifié les personnes ayant

acquis une formation professionnelle dispensé par un

spécialiste sur l’utilisation et surveillance des composants et

des systèmes de sécurité, ceci conformément aux lignes

directrices et les normes en vigueur.

SRO 021 S-DIAS SAFETY RELAY OUTPUT MODULE

Page 8 02.12.2019

Designated Use

The Safety modules are designed for use in safety-oriented

applications and meet the required conditions for safety

operation in compliance with Performance level e (PL e), in

accordance with EN ISO 13849-1/-2 and SIL3 or SIL CL 3 in

accordance with EN 62061.

For your own safety and the safety of others, use safety

modules for their designated purpose. Correct EMC installation

as well as proper transport and storage are also included in

designated use.

Non-designated use consists of

•any change made to the safety modules of any kind.

•the use of damaged safety modules.

•the use of the safety module outside of the instructions

described in this handbook.

•the use of the safety module outside of the technical

data described in this handbook.

Utilisation prévue

Les modules de sécurité sont conçus pour une utilisation dans

les applications sollicitant un niveau de sécurité et répondent à

toutes les conditions nécessaires pour un fonctionnement sûr

conformément au niveau de performance e (PL e) selon la

norme EN ISO 13849-1/-2 et SIL3 ou SIL CL 3 de la norme EN

62061.

Utilisez le module de sécurité conformément à son mode

d’emploi pour votre propre sécurité et celle d'autres personnes.

L'utilisation conforme comprend également une installation

conforme CEM ainsi que le transport et le stockage conforme.

L'utilisation abusive comprend entre autres:

•les modifications quelconques apportées aux modules

de sécurité.

•utilisation de modules de sécurité endommagés.

•utilisation de modules de sécurité en dehors du cadre

décrit dans ce mode d’emploi.

•utilisation de modules de sécurité en dehors des

spécifications décrites dans ce mode d’emploi.

Andere Handbücher für SRO 021

Inhaltsverzeichnis

Andere SIGMA TEK Steuereinheit Handbücher

SIGMA TEK

SIGMA TEK ST 151 Bedienungsanleitung

SIGMA TEK

SIGMA TEK CP 112 Bedienungsanleitung

SIGMA TEK

SIGMA TEK HZS 7321 Bedienungsanleitung

SIGMA TEK

SIGMA TEK VI 021 Bedienungsanleitung

SIGMA TEK

SIGMA TEK DC 061-1 Bedienungsanleitung

SIGMA TEK

SIGMA TEK KL 090 Bedienungsanleitung

SIGMA TEK

SIGMA TEK SCP 111-2 Bedienungsanleitung

SIGMA TEK

SIGMA TEK CSDI 162 Bedienungsanleitung

SIGMA TEK

SIGMA TEK PIM 041-W Bedienungsanleitung

SIGMA TEK

SIGMA TEK NC 100 Bedienungsanleitung

SIGMA TEK

SIGMA TEK EZ 102 Bedienungsanleitung

SIGMA TEK

SIGMA TEK SCP 011 Bedienungsanleitung

SIGMA TEK

SIGMA TEK KL 181 Bedienungsanleitung

SIGMA TEK

SIGMA TEK SCP 011 Bedienungsanleitung

SIGMA TEK

SIGMA TEK EZ 101 Bedienungsanleitung

SIGMA TEK

SIGMA TEK MDD 111-2 Bedienungsanleitung

SIGMA TEK

SIGMA TEK AM 441 Bedienungsanleitung

SIGMA TEK

SIGMA TEK AI 0812 Bedienungsanleitung

SIGMA TEK

SIGMA TEK SDM 081 Bedienungsanleitung

SIGMA TEK

SIGMA TEK ST 011 Bedienungsanleitung

SIGMA TEK

SIGMA TEK S-DIAS AI 022 Bedienungsanleitung

SIGMA TEK

SIGMA TEK STO 081 Bedienungsanleitung

SIGMA TEK

SIGMA TEK SCP 111 Bedienungsanleitung

SIGMA TEK

SIGMA TEK SDM 081 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung