SIGMA TEK HZS 7321 Bedienungsanleitung

HZS 7321

Heating Control

Technical Manual

Date of creation: 03.08.2020

Version date: 04.09.2020

Article number: 05-895-7321-E

Publisher: SIGMATEK GmbH & Co KG

A-5112 Lamprechtshausen

Tel.: +43/6274/4321

Fax: +43/6274/4321-18

Email: [email protected]

WWW.SIGMATEK-AUTOMATION.COM

SIGMATEK GmbH & Co KG

Translation from German

tributed in any form (print, photocopy, microfilm or in any other process) without express permission.

We reserve the right to make changes in the content without notice. SIGMATEK GmbH & Co KG is not responsible for

technical or printing errors in this handbook and assumes no responsibility for damages that occur through its use.

TOUCH OPERATING PANEL HZS 7321

04.09.2020 Page 1

Touch Operating Panel HZS 7321

The HZS 7321 is an intelligent terminal for programming and visualization of automated pro-

cesses. Process diagnostics as well as operating and monitoring automated procedures are

simplified using this terminal.

A projective capacitive touch screen serves as the input medium for process data and pa-

rameters. The output is shown on a 7” WVGA TFT color display.

With the LASAL visualization tool, graphics can be created on the PC, then stored and dis-

played on the build-in touch terminal.

The available interfaces can be used to exchange process data or configure the build-in ter-

minal. In the internal Flash memory, the operating system, application and application data

are stored.

HZS 7321 TOUCH OPERATING PANEL 
 
Page 2 04.09.2020 
Contents 
1Introduction............................................................................. 4 
1.1 Target Group/Purpose of this Operating Manual ......................4 
1.2 Contents of Delivery.....................................................................5 
2Basic Safety Guidelines......................................................... 6 
2.1 Symbols Used...............................................................................6 
2.2 Disclaimer......................................................................................8 
2.3 General Safety Guidelines...........................................................9 
2.4 Software/Training .......................................................................10 
3Norms and Guidelines...........................................................11
3.1 Guidelines....................................................................................11 
3.1.1 EU Declaration of Conformity............................................................11 
4Technical Data .......................................................................12 
4.1 Performance Data.......................................................................12 
4.2 Electrical Requirements.............................................................13 
4.3 Environmental Conditions.........................................................13 
4.4 Display 7” WVGA incl. Touch....................................................14 
4.5 Miscellaneous .............................................................................14 
5Connector Layout..................................................................15 
5.1 Rear..............................................................................................15 
5.2 Applicable Connectors...............................................................19 

 TOUCH OPERATING PANEL HZS 7321 
 
09.2020 Page 3 
6Mechanical Dimensions........................................................20 
7Assembly/Installation ...........................................................21
1 Check Contents of Delivery.......................................................21 
2 Cooling.........................................................................................21 
2.1 Mounting Instructions........................................................................ 22 
8Wiring Guidelines..................................................................24
1 Ground.........................................................................................24 
2 Shielding......................................................................................24 
3 ESD Protection............................................................................24 
4 USB Interface Connections .......................................................24 
5 RS485...........................................................................................25 
9CAN Bus Setup......................................................................26 
1 CAN Bus Station Number ..........................................................26 
2 Number of CAN Bus Participants..............................................26 
3 CAN Bus Data Transfer Rate .....................................................26 
4 CAN Bus Termination.................................................................27 
M-Bus .....................................................................................28 
1 M-Bus Number of Participants ..................................................28 
2 M-Bus Baud Rate ........................................................................28 
3 M-Bus Topology..........................................................................28 
4 M-Bus Addressing ......................................................................28 
5 Further Information.....................................................................29 

HZS 7321 TOUCH OPERATING PANEL 
 
Page 4 04.09.2020 
Process Diagram ...................................................................30
Status and Error Messages...................................................31 
Transport/Storage..................................................................39 
Storage ...................................................................................40 
Maintenance...........................................................................41 
1 Cleaning and Disinfecting the Touchscreen............................41 
2 Service.........................................................................................42 
2.1 Calibrating the Touch Screen............................................................42 
3 Repair...........................................................................................42 
Buffer Battery.........................................................................43 
1 Exchanging the Battery: 1. Option............................................44 
2 Exchanging the Battery: 2. Option............................................45 
Application Information.........................................................47 
1 Interface Assignment .................................................................47 
2 Configuration ..............................................................................47 
Disposal..................................................................................48
Introduction 
1 Target Group/Purpose of this Operating Manual 
This operating manual contains all information required to operate this product. 
 
This operating manual is intended for: 
 

TOUCH OPERATING PANEL HZS 7321

04.09.2020 Page 5

•Project planners

•Technicians

•Commissioning engineers

•Machine operators

•Maintenance/test technicians

General knowledge of automation technology is required.

Further help and training information, as well as the appropriate accessories can be found on

our website www.sigmatek-automation.com

Our support team is happily available to answer your questions.

Please see our website for our hotline number and business hours.

1.2 Contents of Delivery

1x HZS 7321

HZS 7321 TOUCH OPERATING PANEL

Page 6 04.09.2020

2 Basic Safety Guidelines

2.1 Symbols Used

The following symbols are used in the operator documentation for warning and danger mes-

sages, as well as informational notes:

DANGER

Danger indicates that death or serious injury will occur, if the specified

measures are not taken.

To avoid death or serious injuries, observe the all guidelines.

Danger indique une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures graves,

voire mortelles.

WARNING

Warning indicates that death or serious injury can occur, if the specified

measures are not taken.

To avoid death or serious injuries, observe the all guidelines.

Avertissement d’une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures graves,

voire mortelles.

CAUTION

Caution indicates that moderate to slight injury can occur, if the specified

measures are not taken.

To avoid moderate to slight injuries, observe the all guidelines.

Attention indique une situation dangereuse qui, faute de prendre les

mesures adéquates, peut entraîner des blessures assez graves ou lé-

gères.

Respectez toutes les consignes pour éviter des blessures graves,

voire mortelles.

INFORMATION

Provides important information on the product, handling or relevant sections

of the documentation, which require attention.

TOUCH OPERATING PANEL HZS 7321

04.09.2020 Page 7

Danger for ESD-sensitive components.

Les signes de danger pour les composants sensibles aux décharges élec-

trostatiques.

HZS 7321 TOUCH OPERATING PANEL

Page 8 04.09.2020

2.2 Disclaimer

The contents of this operating manual were prepared with the greatest care.

However, deviations cannot be ruled out. This operating manual is regularly

checked and required corrections are included in the subsequent versions.

The machine manufacturer is responsible for the proper assembly, as well

as device configuration. The machine operator is responsible for safe han-

dling, as well as proper operation.

The current operating manual can be found on our website. If necessary,

contact our support.

Subject to technical changes,which improve the performance of the devices.

The following operating manual is purely a product description. It does not

guarantee properties under the warranty.

Please thoroughly read the corresponding documentation and this operating

manual before handling a product.

SIGMATEK GmbH & Co KG is not liable for damages caused through

non-compliance with these instructions or applicable regulations.

Inhaltsverzeichnis

Andere SIGMA TEK Steuereinheit Handbücher

SIGMA TEK

SIGMA TEK S-DIAS EC 121 Bedienungsanleitung

SIGMA TEK

SIGMA TEK PW 022 Bedienungsanleitung

SIGMA TEK

SIGMA TEK AM 222 Bedienungsanleitung

SIGMA TEK

SIGMA TEK CP 112-1 Bedienungsanleitung

SIGMA TEK

SIGMA TEK KL 180 Bedienungsanleitung

SIGMA TEK

SIGMA TEK SCP 111-S Bedienungsanleitung

SIGMA TEK

SIGMA TEK CP 101 Bedienungsanleitung

SIGMA TEK

SIGMA TEK CCP 531 Bedienungsanleitung

SIGMA TEK

SIGMA TEK AI 022-1 Bedienungsanleitung

SIGMA TEK

SIGMA TEK S-DIAS DM 821 Bedienungsanleitung

SIGMA TEK

SIGMA TEK NC 100 Bedienungsanleitung

SIGMA TEK

SIGMA TEK EZ 101 Bedienungsanleitung

SIGMA TEK

SIGMA TEK DM 167 Bedienungsanleitung

SIGMA TEK

SIGMA TEK AM 441 Bedienungsanleitung

SIGMA TEK

SIGMA TEK MDD 111-2 Bedienungsanleitung

SIGMA TEK

SIGMA TEK ICA 012 Bedienungsanleitung

SIGMA TEK

SIGMA TEK STO 081 Bedienungsanleitung

SIGMA TEK

SIGMA TEK SAI 041 Bedienungsanleitung

SIGMA TEK

SIGMA TEK CP 112 Bedienungsanleitung

SIGMA TEK

SIGMA TEK CP 102 Bedienungsanleitung

SIGMA TEK

SIGMA TEK MDP 102-1 Bedienungsanleitung

SIGMA TEK

SIGMA TEK S-DIAS PS 101 Bedienungsanleitung

SIGMA TEK

SIGMA TEK TO 161 Bedienungsanleitung

SIGMA TEK

SIGMA TEK C-DIAS Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung