Sirius Satellite Radio SM927 Bedienungsanleitung

SM927

RANGEHOOD INSTALLATION INSTRUCTIONS

Congratulations on your purchase!

Thank you for choosing a Sirius product.

SM927 520 EAN #9351116000356

SM927 850 EAN #9351116000370

www.siriusbrand.com

BEFORE YOU INSTALL

LINE DRAWINGS

DUCTING AND CLEARANCES

INSTALLING THE RANGEHOODS

USING THE RANGEHOOD / MAINTENANCE

REPLACING THE LED LIGHT

WIRING DIAGRAM

WARRANTY INFORMATION

The symbol on the product or on its packaging indicates that this product

may not be treated as house-hold waste. Instead it shall be handed

over to the applicable collection point for the recycling of electrical and

electronic equipment. By ensuring this product is disposed of correctly,

you will help prevent potential negative consequences for the environment

and human health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed information about

recycling of this product, please contact your local city office, your

household waste disposal service or the shop where you purchased the

product. This appliance is marked according to the European directive

2002/96/EC on waste electrical and electronic equipment (WEEE).

Sirius warranty covers only Sirius product. If you choose to install a non-Sirius branded accessory

such as flexible ducting, Sirius will only warrant the rangehood and motor. If installation is found to be

the cause of failure or issue then charges will apply for service and parts.

Flexible ducting is not permitted under any circumstances. Flexible ducting has been found to

increase noise levels, increase vibration and reduce airflow. Sirius Semi-rigid or solid ducting can be

used in lieu. There is a range available to suit any application.

Ducting available at www.siriusbrand.com

6 Year Warranty when Sirius Ducting is used. Full replacement warranty on parts and labour.

See website for terms & conditions.

A reduction in the duct diameter from stated ducting size will void warranty.

If you are in doubt about the ducting, please contact Sirius on 1300 762 219 prior to installation

WARNING

The appliance must be installed and

connected to the power supply only by a

qualified technician.

• There should be adequate ventilation of the room when the rangehood is used at the same time as

appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the

room)

• The details concerning the method and frequency of cleaning

• There is a fire risk if cleaning is not carried out in accordance with the instructions;

• Do not flambé under the range hood;

• CAUTION: Accessible parts may become hot when used with cooking appliances.

BEFORE YOU INSTALL - DUCTING INFORMATION

LINE DRAWINGS

SM 927

Min. 600mm - Max. 700mm for induction cooktops.

Min. 650mm - Max. 750mm gas cooktops.

If the rangehood is positioned above the max height

recommended, warranty may be compromised

as performance of the rangehood will be affected.

Measurement is taken from the top of the trivets to

the underside of the hood. (Fig.1)

• The air being drawn can’t be conveyed through

or into a duct used to let out fumes from

appliances fed by energy other than electric

power (eg. centralized heating, radiators, water

heaters, etc.).

• Attention: remove any possible PVC film from the

stainless steel, including the filters.

• To externally vent, please comply with the

pertaining rules given by competent authorities.

• Provide the room with an adequate ventilation

when a rangehood and appliances fed by energy

other than electric power (gas, oil, or coal stoves,

etc.) are used simultaneously. The rangehood,

when evacuating the air, could generate a

negative pressure in the room which can’t exceed

the limit of 0.04 mbar, in order to avoid the

suck of exhausts deriving from the heat source.

Therefore the room should be provided with air

intakes to allow a constant flow of fresh air.

If the rating label in the rangehood shows the symbol

, the appliance is built in class II° and it does not

need any earth connection.

If the rating label in the rangehood does not show

the symbol , the appliance is built in class I° and it

needs the earth connection.

When performing the electrical connections on the

appliance, please make sure that the current-tap

is provided with earth connection and that voltage

values correspond to those indicated on the label

placed inside the appliance itself.

Before carrying out any cleaning or maintaining

When ducting rangehood, options are as follows:

Roof vent - EASYROOF 150T/M

*Kit includes roof flashing

Download installation guide

Eave vent - EASYEAVE 150

Download installation guide

Wall vent - EASYWALL 150

Download installation guide

operations, the appliance needs to be switched off.

If the appliance is not provided with a non-separable

flexible cable and plug, or with another device

ensuring omnipolar disconnections from the grid,

with an opening distance between the contacts of at

least 3mm, then such disconnecting devices must be

supplied within the fixed installation.

If the fixed appliance is endowed with a supply cord

and a plug, the appliance has to be put in a place

where the plug can be reached easily.

The use of materials which can burst into flames

should be avoided in close proximity of the appliance.

When frying, please pay particular attention to fire

risk due to oil grease. Being highly flammable, fried

oil is especially dangerous. Do not use uncovered

electric grills. In order to avoid possible fire risk, all

instructions for grease-filter cleaning and for removing

eventual grease deposits should be strictly followed.

WARNING

600 - 700mm (induction)

600 - 750mm (gas)

600 - 700mm (induction)

600 - 750mm (gas)

(Fig. 1)

(Fig. 2a)

(Fig. 2b)

(Fig. 2c)

SIDE VIEW FRONT VIEW

DUCTING AND CLEARANCES

To install the appliance please respect the follow

instructions:

• The appliance must be installed by qualified

technicians, or where possible use a Sirius

recommended installer. See siriusbrand.com.

In order to avoid damage to the electronic parts

of the appliance, please do not use additional

screws.

• Essential precautions to respect before installing

the appliance are the following:

To have made a cutout on the bottom of the

cabinet which is suitable to hold the appliance in

position (fig. 2):

SM923 520 - (W) 502 x (D) 265mm

SM923 850 - (W) 835 x (D) 265mm

SM927 INSTALLATION

Before installing the appliance, make sure that

none of the parts are damaged in any way. In

case of damaged parts, contact your retailer

and do not proceed with installation. Read all

of the following instructions with care before

installing the appliance.

• Use ducting within the min/max specifications

• Limit the number of ducting bends.

• Do not make any changes in ducting diameter

(recommended constant diameter: Ø 150 mm

or equal surface area).

Before installing the appliance - in order not to

damage the appliance itself - the metal grease filter

should be removed. These filters could be removed

by pushing the handles towards the back side of the

rangehood and pulling it downwards to unfasten it

from its slot. (Fig.1).

NOTE

(Fig.1)

(Fig.2)

1. Prepare the power supply - 240 volts.

2. Prepare a hole for the exhaust - 160mm diameter.

• Do not use screws to fix the ducting to the

rangehoods as they will prevent the movement of

non-return valves.

• Limit the number of elbows in the ducting, since

each elbow reduces the duct efficiency by 1

metre. (i.e. if you use two 90° elbows, the length

of ducting must not exceed 5 metres.)

• Avoid abrupt direction changes.

• Use 150mm constant diameter ducting for the

whole length.

• The use of Sirius ducting will increase the

warranty of the unit to 6 years.

WARNING: Failure to install the screws or fixing

device in accordance with these instructions

may result in electrical hazards.

(Fig.3)

NOTE

WARNING

The rangehood is quite heavy, so two people

will be needed for installation.

1. To install the appliance, adjust the position of the

adjustable side-springs using the supplied screws

(fig.4), according to the thickness of the board, in

which the appliance will be fixed.

2. Insert the rangehood into the cutout in the

cabinet until the stop click of the side-springs is

heard and the rangehood is supported (Fig 5).

3. Insert the 25mm screws provided into the front

and rear holes inside the rangehood (Fig.5A) to fix

it to cabinetry.

4. Insert the grease filter (Fig.1)

(Fig.4)

• To make it easier to install the rangehood inside

the cabinet, it is recommended to remove the

glass. Unscrewing the four M3x10 screws as

shown in Fig. 3.

(Fig.5)

(Fig.5A)

• Accurate maintenance guarantees good

functioning and long-lasting performance.

• Particular care is due to the grease filter panel. It

can be removed by pushing its handle toward the

back side of the rangehood and pulling the filter

downwards so to unfasten it from its slot (Fig.1).

To insert the filter just perform the opposite

operation.

• The grease filter needs cleaning by regular

handwashing or in dishwashers every two

months or 30 continuous hours, depending on its

use. Button lights will flash when filter needs to

be cleaned. To reset, press and hold the the 01

button for 2 seconds when the motor is off.

Filters may require cleaning sooner if

frequent heavy frying is done.

• To clean the appliance itself, water and detergent

are recommended, while abrasive products

should be avoided. For steel appliances

specialized detergents are recommended (please

follow the instructions indicated on the product

itself to obtain the desired results).

To remove the rangehood from the cabinet,

remove the fixing screws (fig. 5A) using a

screwdriver, and remove the grease filters

(fig.1).

• Push down on the small handle of the springs,

which are inside the rangehood, with the

necessary strength to unhook the hood from the

cabinet.

If the supply cord is damaged, it must be

replaced by the manufacturer or its service

agent or a similarly qualified person in order to

avoid a hazard.

MAINTENANCE

WARNING

NOTE

SM927 (fig. 6)

A: Motor switch on speed 1/off - (low/simmer)

B: Motor switch on speed 2 - (general cooking)

C: Motor switch on speed 3 - (high power)

D: Motor switch on speed 4 - (booster)

E: Light on/off switch

USING THE RANGEHOOD

(Fig.6)

REPLACING THE LED STRIP ON THE

SM927

1. Before replacing the LED light, switch off the

rangehood, then - by using appropriate tools -

remove the LED light from its slot. (Fig 7a - b)

• Note: light is easier to remove from the centre

of LED strip. Use a small, flathead screwdriver,

pallette knife or blunt butter knife.

(Fig.7a) (Fig.7c)

(Fig.7b) (Fig.7d)

2. Take out the LED light from its connector and

replace. (Fig 7c - d)

• To find the correct LED light, please contact Sirius

directly on our toll-free number: 1300 762 216.

WIRING DIAGRAM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sirius Satellite Radio Dunstabzugshaube Handbücher

Sirius Satellite Radio

Sirius Satellite Radio SLT105 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SEM1 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio 9351116001063 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT960 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SDD2ELEMTC Series Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SL920 FRESCO Series Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SUF1 Handbuch

Sirius Satellite Radio

Sirius Satellite Radio SLT955 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SUF1 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SUT950 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SU906 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Valentina SLT958EM Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SUT950 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SL906 Series Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio S-DDH1 Benutzerhandbuch

Sirius Satellite Radio

Sirius Satellite Radio SLT955 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLTC919 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SL913 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SUTC919 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SILT-28 Series Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SL926 Series Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Stone SU-DD2-L Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SIL-EM490X Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT972 Kurzanleitung

Beliebte Dunstabzugshaube Handbücher anderer Marken

emmeti

emmeti RECUPA MED A-140 Leitfaden

Nibe

Nibe F135 Bedienungsanleitung

Zephyr

Zephyr Spruce AK9834BS Installationsanleitung

Kuppersberg

Kuppersberg INTRO 60 Montage- und Wartungsanleitung

Hisense

Hisense MH6INBG Bedienungsanleitung

Miele

Miele DA 1255 Bedienungsanleitung

Broan

Broan 46000 Bedienungsanleitung

GE Profile PV977 Originalbetriebsanleitung

FALMEC

FALMEC FFRIA24W5FS Bedienungsanleitung

Whirlpool

Whirlpool RH2600XL-1 SERIES Bedienungsanleitung

ETNA

ETNA AV360RVS Bedienungsanleitung

JUNO

JUNO JDF603E6 Bedienungsanleitung

Miele

Miele DA 6708 D Bedienungsanleitung

Tricity Bendix

Tricity Bendix LE 150 Handbuch

AEG

AEG X68163BV1 Bedienungsanleitung

AEG

AEG 125 D Bedienungsanleitung

Smeg

Smeg KSEV97X Bedienungsanleitung

Nibe

Nibe S Series Benutzerhandbuch