Sirius Satellite Radio SUT950 Bedienungsanleitung

INSTALLATION INSTRUCTIONS

INSTRUCTIONS DE MONTAGE

CARE AND USE MANUAL FOR:

MANUEL D’ENTRETIEN ET D’UTILISATION POUR :

Models covered by this instructions:

Modèles couverts par ces instructions :

SUT950 - SUT951 - SUT958

*** BEFORE INSTALLATION ***

ENSURE THERE IS NO VISIBLE OR HIDDEN DAMAGE SUSTAINED DURING SHIPPING

*** AVANT L’INSTALLATION ***

S’ASSURER QU’IL N’Y A PAS DE DOMMAGES VISIBLES OU CACHÉS SUBIS PENDANT

L’EXPÉDITION

*** SHIPPING DAMAGE ***

MUST BE REPORTED WITHIN 5 DAYS OF RECEIPT

*** DOMMAGES DUS AU TRANSPORT ***

DOIT ÊTRE SIGNALÉ DANS LES 5 JOURS SUIVANT SA RÉCEPTION

Ceiling Hood

Hotte de plafond

WARNING

Thank you for purchasing a Sirius Range Hood.

Please read all the instructions in this manual before

installing the appliance.

Save these instructions for future reference.

Only use this appliance as an exhaust ventilation system for the re-

moval of cooking vapors. DO NOT use to expel ammable substan-

ces or any other materials or vapors.

The installation procedures in this manual are intended for quali-

ed installers, service technicians or persons with similar qualied

background.

DO NOT attempt to install this appliance yourself.

Ensure that electrical power is turned off at source before commen-

cing installation. All electrical wiring must be properly installed, insula-

ted and grounded and conform to all applicable codes and standards.

Make sure all existing duct work is clean of grease build up, or duct

work should be replaced, if necessary, to avoid the possibility of a

grease re. Check all joints on ductwork to ensure proper connec-

tion and all joints should be properly taped. Be careful when cutting

through ceilings or walls not to damage any hidden pipes or electrical

wiring. Ensure your kitchen has sufcient air return vents to replace

the exhausted air.

Fan ducts should always be vented to the outside of your home and

never into spaces within walls, ceilings, lofts or attics. Only use rigid,

smooth steel for ducting. The exhaust point of the blower requires a

6” round or 8” connection.

TABLE OF CONTENTS

BEFORE YOU BEGIN 4

DUCTING 4

ELECTRICAL

Electrical Supply 5

INSTALLATION

Before the installation 6

Panels opening 6

Installation 6

OPERATING PROCEDURES

General Advice 9

Technical data 10

Standard conguration 10

Generating a new transmission code 10

Learning the new transmission code 10

MAINTENANCE

Cleaning the Filter 12

Cleaning the Hood 12

Substitution of the LED bar 12

WARRANTY SERVICE 13

BEFORE YOU BEGIN: It is advisable to

test run the range hood before installa-

tion.

BEFORE STARTING – please read this

entire document and ensure you are fully

conversant with the require-ments and li-

mitations. These units weigh approximately

125lbs and therefore require a minimum of

two people to install.

Recommended height from cook top to un-

derside of hood = 30” for gas, 25” for elec-

tric.

BEFORE YOU BEGIN

The manufacturer declines all responsibility

in the event of failure to observe the instruc-

tions given here for installation, maintenan-

ce and suitable operation of the product. The

manufacturer further declines all responsibi-

lity for injury due to negligence and the war-

ranty of the unit automatically expires due

to improper maintenance and/or installation.

Use the shortest most direct ductwork rou-

te possible. Only use metal ducting - plastic

ducting is generally not permitted by code.

Do not use exible metal ducting as the rid-

ges of the ducting cause severe air turbulen-

ce and will signicantly reduce the efcien-

cy of any hood -THIS TYPE OF DUCTING

WILL REDUCE EFFICIENCY BY 50%.

Vent hoods may interrupt the proper ow of

exhaust gases from re-places, gas furna-

ces and gas water heaters. To minimize the

risk of drawing these lethal gases back into

the home please follow the heating equip-

ment manufacturers safety standards and

guidelines. Refer to NFPA and ASHRAE for

additional information.

DUCTING

If vented externally, 6” / 150mm round duc-

ting must be available for the hood through

the ceiling, in line with the central vertical

axis of the range hood.

If it’s gas range or cook top recommanded

8”.

This unit must have it’s own ductwork. Do

not under any circumstances vent this unit

into any other ductwork or exhaust ducting

in the building.

Furthermore, please read carefully all of the

following installation instructions.

- Use an exhausting pipe whose maximum

length does not exceed 5 meters.

- Limit the no. of elbows in the piping, since

each elbow reduces the air capacity

of 1 linear meter. (Ex.: if you use no. 2 x 90 °

elbows, the length of piping must not exceed

3 meters).

- Avoid abrupt direction changes.

- Use a 6”/8” mm constant diameter pipe for

the whole length.

- Use piping approved by standards in force.

Electrical Supply.

This appliance requires 120V/60Hz, 3amp

electrical supply - ensure an appropriately

qualied person completes the electrical ho-

ok-up. The connection point for the electrical

supply is at the top of the unit, therefore the

electrical supply must be run down from the

ceiling alongside the ductwork.

All electrical and venting hook-ups must be in

place before commencing installation of the

hood-fan.

ELECTRICAL

WARNING: All electrical work must be

performed by a qualied electrician.

Please ensure that the appropriate electrical

codes or prevailing local building codes and

ordinances are adhered to.

Ensure that the electricity supply is discon-

nected at source. Do not use an extension

cord or adapter plug with this appliance.

This appliance must be grounded. Connect

to a properly grounded branch circuit, pro-

tected by a 15 amp circuit breaker.

BEFORE THE INSTALLATION

This models can be used only if connected

with external motors produced by the same

manufacturer.

PANELS OPENING

It is possible to open the steel panels, which

cover the grease lters, by slightly pulling on

a side of the panel itself, as shown in Fig. 1.

INSTALLATION

SUT958: 34” 4/64 x 15” 60/64

distance of 12” between the ceiling and the

false ceiling.

After having chosen the most suitable posi-

tion, prepare the ducting: an air outlet con-

nection piece, with a diameter of 6” to be in-

stalled in the side selected, is provided with

the appliance.

Leave any unused exhaust outlets closed.

As shown in g. 2.

To achieve the complete opening of panels,

you need to release the safety chains, by

using the appropriate spring catches.

For proper working, it is recommended to in-

stall the appliance at a distance of 83” from

the oor.

Before starting the appliance installation, ple-

ase check that all components are not dama-

ged, in such a case contact your retailer and

do not carry out installation.

INSTALLATION

Fit a false ceiling with an opening that has the

following dimensions:

SUT950: 57” 43/64 x 37” 63/64

distance of 12” between the ceiling and the

false ceiling;

SUT951: 41” 59/64 x 26” 12/64

Draw the outline of the hole to house the

ceiling-mounted hood on the solid ceiling as

shown in Fig. 3 according to the model cho-

sen.

Make 4 holes in the ceiling according to the

dimensions as shown in Fig. 4, place the

metric plugs provided in the holes.

Open the stainless steel panels and remove

the grease lters in order to avoid damaging

them in any way and too allow installation;

screw the threaded bars provided into the

plugs as shown in g.5.

The threaded bars are 9” 27/32 long and

serve to install the ceiling-mounted hood at

a distance from the solid ceiling of between

10” 40/64 and 14” 9/16 as shown in g. 6.

MAX

10” 40/64 MAX

14” 36/64

in case of a larger gap between the hood

and the ceiling, you need to use longer th-

readed bars.

Connect the power supply into the metal box

placed inside the hood as shown in g. 7.

and connect the air outlet pipe.

Do not x the ducting to the outlet with

screws - use DUCT TAPE; place the ceiling-

mounted hood into the niche, the outer edge

of the hood needs to be perfectly ush with

the false ceiling. Insert the plates and nuts

provided on the threaded bars, making sure

to tighten them securely, as shown in Fig. 8;

ret the grease lters and lter cover panels.

OPERATING PROCEDURES

Read all the instructions before operating

the appliance. Save these instructions for

future reference.

General Advice.

Ensure that the grease lters are in place.

Without these components, operating blo-

wers could catch on to hair, ngers and lo-

ose clothing. Keep fan, lters and surfaces

clean of grease and fat. Always turn hood

fan ON when cooking. NEVER leave coo-

king unattended.

NEVER dispose cigarette ashes, ignitable

substances or any foreign objects into blo-

wers.

Cooking that generates ame is not re-

commended as this hood is equipped with

a thermal overload that will shut down the

motor if it senses excessive heat.

When frying, oil in the pan can easily

overheat and ignite. Heat oil slowly in an

appropriately sized pot (covering the entire

burner) to reduce the risk of boiling over

and burning.

In the event of a range top grease re, ob-

serve the following:

Switch OFF the range hood. Turn off the

cook top then smother ames with a close

tting lid, cookie sheet or other metal tray. If

the ames do not go out immediately.

EVACUATE AND CALL THE FIRE DE-

PARTMENT.

Never pick up a aming pan – you may be

burned. DO NOT USE WATER including

wet dishcloths or towels, as a violent steam

explosion may occur.

SUT950 - SUT951 - SUT958

RC001

RADIO CONTROL

Radio control used for the remote operation of

ducted cooker hoods.

TECHNICAL DATA

- Alkaline battery powered: 12 V mod. 27A

- Operating frequency: 433.92 Mhz

- Combinations: 32.768

- Max. consumption: 25 mA

- Operating temperature: -20 ÷ + 55 °C

- Dimensions: 130x45x15 mm.

OPERATING DESCRIPTION

The transmitter is equipped with 5 buttons for coo-

ker hood management, as specied below:

: Light ON/OFF command.

: Motor ON (speed level 1) / OFF command.

: Reduce speed.

: Increase speed.

: 10-minute timer.

INITIAL OPERATING CONDITION

The manufacturer supplies the radio control unit

ready to be used with codes preset in the Factory

OPERATION MODE

Standard conguration:

Standard conguration requires all “cooker hoods

– radio control - system” to be provided with the

same transmission code. In the event two cooker

hoods – radio control system are installed in the

same room or nearby, each system may affect the

operation of the another. Therefore, the code of

one radio control system must be changed.

Generating a new transmission code:

The radio control system is provided with preset

codes. Should new codes be required, proceed

as follows: Press simultaneously buttons:

for two seconds. When Leds light on, press but-

tons:

(within 5 seconds). Leds ashing 3 times indicate

the procedure is completed.

WARNING! This operation deletes permanen-

tly the preset codes.

Learning the new transmission code:

Once the transmission code is changed in the ra-

dio control unit, the electronic central unit of the

cooker hood must be made to set the new code in

the fol- lowing way:

Press the main power-off button of the hood and

then restore power to the electronic control unit.

Within the next 15 seconds, press the Liight But-

ton to synchronise the central unit with the

code.

Andere Handbücher für SUT950

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Sirius Satellite Radio Dunstabzugshaube Handbücher

Sirius Satellite Radio

Sirius Satellite Radio SLT972 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT976 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SIU3 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLTC 111 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio ALFRESCO SL83 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SILT-21 B Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio S900 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio S-DD2-L EMIC 880 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SUT958 H200 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SM923 52 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SDD2ELEMTC Series Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SL85 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT968 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SDD2EMIX60 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SEM51 Leitfaden

Sirius Satellite Radio

Sirius Satellite Radio SLT962 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SL906 DL Series Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT972 EM WIFI Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SU900 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Valentina Series Bedienungs- und Wartungshandbuch

Sirius Satellite Radio

Sirius Satellite Radio SLT980 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SU900 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SM923L520 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLTC EM 97 900 Bedienungsanleitung

Beliebte Dunstabzugshaube Handbücher anderer Marken

emmeti

emmeti RECUPA MED A-140 Leitfaden

Nibe

Nibe F135 Bedienungsanleitung

Zephyr

Zephyr Spruce AK9834BS Installationsanleitung

Kuppersberg

Kuppersberg INTRO 60 Montage- und Wartungsanleitung

Hisense

Hisense MH6INBG Bedienungsanleitung

Miele

Miele DA 1255 Bedienungsanleitung

Broan

Broan 46000 Bedienungsanleitung

GE Profile PV977 Originalbetriebsanleitung

FALMEC

FALMEC FFRIA24W5FS Bedienungsanleitung

Whirlpool

Whirlpool RH2600XL-1 SERIES Bedienungsanleitung

ETNA

ETNA AV360RVS Bedienungsanleitung

JUNO

JUNO JDF603E6 Bedienungsanleitung

Miele

Miele DA 6708 D Bedienungsanleitung

Tricity Bendix

Tricity Bendix LE 150 Handbuch

AEG

AEG X68163BV1 Bedienungsanleitung

AEG

AEG 125 D Bedienungsanleitung

Smeg

Smeg KSEV97X Bedienungsanleitung

Nibe

Nibe S Series Benutzerhandbuch